Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine. Household bleaches often have unwanted fragrances and colors.
There's a protocol when using Clorox® Regular Bleach2 for swimming pool disinfection. On an ongoing basis, if you super-chlorinate the pool with 100-200 oz. bleach per 10,000 gallons of water, in addition to regular chlorination, algae growth can be prevented.
6 reasons why you should avoid disinfecting your pool with bleach instead of chlorine. Finally, if it is not properly dosed, bleach can become dangerous for bathers! Pool water that is too concentrated in bleach can become toxic, irritating the eyes, skin and respiratory tract of swimmers.
High concentrations of chlorine (above 1.5 ppm) will attack the liner and bleach it, thus damaging it. Any level below this range will weaken its ability to kill off bacteria. The addition of chlorine to your pool water has to be done in a careful manner.
Therefore, a lot of people keep away from ever using a drop of bleach near their pools. Bleach is safe and the only chemical you should be using in your pool unless cleaning pool tile with baking soda. So yes, you can use bleach to keep your pool water chemistry balanced.
Depending on how much you have added and the size of your pool, it is generally safe to wait about 4 hours after adding liquid chlorine or until levels reach 5 ppm or lower.
Green algae, unlike its black counterpart, is a true algae; it isn't resistant to chlorine, so you can control it by shocking the pool. If you don't want to spend a lot of money on expensive pool chemicals, you can shock with household bleach.
They are identical in every way, with the exception of strength. Household bleach is usually a 6% concentration (although some of the cheaper stuff is 3%), while pool chlorine can typically be found in strength between 10% and 12%. All of this is sodium hypochlorite, and works the same in sanitizing your water.
Clorox itself recommends using between 100 and 200 ounces of regular-strength bleach per 10,000 gallons of pool water -- one gallon is 128 ounces, and many bottles of bleach are available in one-gallon or half-gallon sizes. Pool professionals tend to recommend more conservative amounts of bleach.
When chlorinating wading pools, use 1/8 cup per 100 gallons of new water. Mix required amount of Clorox® Regular Bleach2 with 2 gallons of water and scatter over surface of pool. Mix uniformly with pool water. Empty small pools daily.