Measure both the width of the window and the height of the window. Consider adding an extra 3 inches to the width and height for optimum light control and privacy. Extending the blinds outside the window will also provide the space needed for the mounts and help the window appear larger than it actually is.
That said, again, the closer to the window you can get the blind, the better it will perform in terms of potentially reducing condensation. So again, aim to get the blind within 25-50mm of the glass, particularly if you have a thermally insulating blind.
Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind's height when it extends beyond the frame.
In summary. In summary, for Venetian, roller and vertical blinds, we would recommend they be hung from within the recess. However, Roman blinds would be better suited outside the recess, as they are able to let more light enter into the room.
Inside mount blinds are typically flush with the window's opening and don't cover the window trim. On the other hand, outside mount blinds and shades get installed outside the window frame.
Blinds can either be installed inside the window frame (for inside-mount blinds) or on the wall on either side of the window (for outside-mount blinds).
Inside mount blinds are mounted inside your window's frame and provide a clean built-in look. This mount leaves your window frame exposed. The minimum depth for inside mount blinds is ¾ inches for non-flush blinds. However, to achieve a flush look the minimum depth for inside mount is 2 inches.
Yes, for your blinds to work to greatest effect and to achieve the right visual finish, window blinds should rest on the windowsill. The only exception to this is vertical blinds which require a small amount of clearance to prevent the louvres from dragging on the windowsill when operated.
If your window recess is very narrow (as per the table above) you might find that some styles of blinds won't fit snugly inside of the recess and will instead stick out into the room to a degree, in which case you'll almost certainly think they look better hung outside of the recess instead.
Turned Up: Rounded Side Facing Out
Pros: More privacy: by turning the blinds up, you limit the amount of visibility space directed towards the room. People won't be able to see inside when passing by. Better light control: limiting visibility also means limiting lighting.
Step 1: Measure Width
Measure horizontally to the nearest 1/8 inch between the outer-most points where you want your window treatments placed. For optimal light control, it's recommended to overlap each side of the window frame by at least an additional 3/4 inch.
Width is typically the most important figure. Generally, inside-mounted blinds should be about 1/4- to 3/8-inch smaller than your narrowest width measurement. Length is a bit different. If you don't want your blinds to rest on your window sill, make sure they're ¼-inch smaller than the length of the window frame.
Turn your blinds up. This direction is better for improved privacy too, as minimized gaps between the slats don't allow curious passersby to view the inside of the house. To let in a small amount of natural light, it's best to turn your blinds down and close them.
Positioning your blinds downward also increases your overall privacy. The only time that it is recommended that you position your blinds in the up position during the nighttime hours is if you prefer to wake up with the sun.
When it comes to roller blinds, it is possible to see through them at night, if there is enough light. If you are looking for privacy, however, thicker roller blinds will offer more coverage. The same goes for blackout roller blinds; they will completely block out any light from coming in.
Adjusting your blinds with the slats facing down provides the maximum privacy. When in this position it offers the most coverage and protection from the outside looking in.
Additionally, those bacteria that were kept in the dark were also more closely related to respiratory diseases than those that stayed alive even with exposure to sunlight. So not only are you benefiting from the vitamin D that comes from the sun, but it could also be saving you from respiratory disease as well.
We recommend your vertical blind overlaps the top of your window recess by at least 7cm. The desired overlap at the bottom of your window recess is personal choice. Check for obstructions such as radiators. If your window sill protudes more than 5cm, you should stop your blind at this point.
If the airplane's interior is dark while its exterior is bright and sunny, passengers may struggle to quickly exit the airplane during an emergency. Therefore, airlines require passengers to open their window shades during takeoffs and landings to allow for eyesight adjustment.
Blinds can be lighter or darker than your walls, but there are a few things to keep in mind before choosing a color. To ensure that everything blends well together, the blinds and walls should be at least one shade lighter or darker than each other, but most importantly, they should also be a similar tone.
I often choose a color that will work with either the trim or the wall color if the trim is similar. To me, wood blinds are less a statement on their own but a functional part of your house. And since most blinds fit inside the trim, they generally should match or be slightly darker than the trim.
The short answer is: it depends! We recommend sticking to a common element in terms of color, fabric, or style. For example, if you want some blinds and some shutters, you could use the same color wood. For homes with varying styles in each room, you may want to focus on cohesion on a room-by-room basis instead.
Whether others outside can see through blinds or not at night really depends on the type of binds you use and the fabric materials on it: blackout, transparent, or translucent. Generally, what you see outside through blinds during the day is what others will see inside at night.
No, people outside would not be able to see anything of inside, not even movement close to the window, nor the shapes and outlines of things. They would, however, be able to see a diffuse glow of light if you have a reasonably bright light not too far from the window.
'From a best practice point of view, we recommend opening blinds at night on west and north-west facing windows to help with nighttime cooling and closing the blinds during the day on east and south-east facing windows to help create a cool refuge from the sun. '