Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity. Many commercial pool products for raising alkalinity utilize baking soda as their main active ingredient.
Baking soda is safe and straightforward to use, while also providing your pool with a clean, clear, sparkling water that is pleasant to swim in. Baking soda does not sting the eyes; neither can it cause drying of the skin.
The good news is, baking soda is a simple, safe way to help maintain water quality in your pool, keeping your water clear, sparkling, and pleasant to swim in, without drying the skin or stinging the eyes.
The simple answer is No. Baking soda cannot be used to clear up a cloudy pool because it is a base. Bases raise PH levels, which causes the water to turn cloudy. Some people suggest using baking soda as a quick fix to high alkalinity levels, but it's not reliable as a pool chemical.
You can dilute the baking soda in a bucket of water or just broadcast it over the entire surface of your swimming pool. It should take about 24 hours before your swimming pool completely clears.
In theory, if you have a cloudy swimming pool, you can add chlorine to “shock it” and clear things up. Chlorine will get the job done. But, the amounts may vary and you may have to really pound the pool with chlorine to get the water totally clear.
There are three main causes for cloudy pool water, including poor filtration, chemical imbalances, or environmental factors, like nearby construction, trees, or wildlife. Filter and pump problems can be caused by a range of different issues.
If the pH drops below 7.2 after a day or two, add another 4 lbs. Baking soda per 10,000 gallons of water. The procedure should bring alkalinity into the desirable range of between 100 and 150 parts per million.
What can you use instead? Bromine — considered a safe substitute for chlorine. Looks for BCDMH tablets, which are typically 66% bromine and 27% chlorine. If unable to find, you can use just bromine but it may leave the water a dull green color.
Pool bather load and improper chemical balancing can also make your pool water more acidic. Once the pH and alkalinity in your swimming pool water get too low, that often causes your pool to become cloudy. By adding baking soda to the pool water, it will make your pool water pH and alkalinity go back up.
Mixing bleach and baking soda has no harmful effects, and baking soda may probably be the only cleaning agent you can safely mix with bleach. This is because this mixture won't react badly and create toxic gases like chloramine the way other cleaning agents do.
ARM & HAMMER™ Baking Soda is the quick, safe and natural way to open your pool for the season. Use our conveniently sized larger bags to help naturally balance your pH and alkalinity to achieve stunning clear water you can be proud of.
Common unscented household bleach (sodium hypochlorite) works well to shock a pool.
Baking soda and baking powder are not the same. Sodium bicarbonate and bicarbonate of soda are other names for baking soda. Baking powder is made of baking soda plus cream of tartar and cornstarch. Baking powder can be substituted for baking soda by tripling the amount of baking powder.
Baking Soda
Most remedies call for adding additional chlorine into the water. If your water's pH balance is between 7.2 and 7.5, however, you can add baking soda to the water to help clear it up. This serves as a replacement for chlorine because baking soda is a natural cleaning agent.
Soda Ash or Baking Soda? If you want to raise your pH and alkalinity together, use soda ash (sodium carbonate). If your goal is to raise alkalinity only, use baking soda (sodium bicarbonate).
It's pretty tough to over-shock your pool; shocking your pool two days in a row with the proper dosage for your pool volume shouldn't be a problem – and in fact, is sometimes even needed to rid your pool of algae and other contaminants.
Chlorine. Chlorine is by far the most commonly used swimming pool sanitization agent. The goal of adding chlorine to a pool is simple: kill microorganisms such as bacteria and algae. A pool with excessive bacteria and algae is cloudy and unsafe to swim in.
Skim the top of the pool for debris that may have settled on the pool surface. Add one pound of diluted granular shock to the water for every 7,000 gallons of pool water. Run the filter for 24 hours and retest the water. The slimy looking film can be an early onset of algae.