Concrete and asphalt require more cleaning power. You'll want to use the turbo nozzle on the 1600 PSI for hard-to-clean driveways, sidewalks, and patios as well as brick paving. For wood decks and painted surfaces, switch to the gentler 40-degree nozzle.
You have to know its capabilities, 1600 PSI is good for most home jobs (general siding cleaning/gutters, car washes, cleaning furniture) Don't expect it to clean a whole concrete driveway in one smooth pass.
This 1600 psi 1.2 GPM electric pressure washer, as explained earlier, generates 1,600 Pounds Per Square Inch (which is in the recommended pressure range), and 1.2 Gallons Per Minute (ideal for washing cars, house exteriors, fences, garage floors, etc…).
For instance, a light layer of dirt or dust may only require a PSI of 1,500 to 2,000, while a thick layer of oil or grease may require a PSI of 3,500 or higher to remove.
If you want to clean your driveway quickly and efficiently, use a pressure washer of at least 3100 PSI. Using pressure washers with pressures ranging from 1000 to 2300 PSI will also help you clean your driveway, but it will take a long time.
Domestic vs Industrial or Professional Pressure Cleaner
If your pressure cleaner only goes up to 1500 psi at maximum, you can still clean your driveway. However, take note that it may take a little longer and more effort, and there may be some dirt and stains it will not get out.
Most electric pressure washers create 1300-1700 pounds per square inch of pressure (PSI) with a water flow of 1.5 gallons per minute (GPM), but experienced contractors recommend between 2000 and 3000 PSI and a flow of at least 2.5 GPM to clean dirty concrete effectively. …
For light-duty tasks such as washing a car or cleaning a barbecue grill, a pressure washer with 1,000 to 1,750 psi and 1.4 to 1.6 gpm (1,400 to 2,800 ECUs) will probably do the job.
A strength of 4,000 psi (pounds per square inch) after a one month cure is the industry minimum for concrete driveways, slabs, and sidewalks. However, 4,500 psi as the ideal. According to guidelines published by AsktheBuilder.com, a home foundation requires a thicker pour of 8-10 inches and a psi of 3,500-4,000.
What PSI pressure washer do I need to clean concrete? To clean concrete effectively, use a power washer with a pressure rating of at least 3000 psi and a flow rate of at least 4 gallons per minute (gpm).
For cleaning a wooden deck, you'll be best served by using the lowest pressure setting that's still effective. For soft woods like cedar or pine, this is usually about 500 to 600 psi. For harder woods, it can go up to 1200 to 1500 psi.
LIGHT-DUTY pressure washers in the 1,300 to 1,700 PSI range are great for cleaning patio furniture, lawn equipment, stairs, and vehicles such as automobiles and small SUV's.
Light Duty 1500-1900 PSI
For regular maintenance and light household cleaning jobs, a light-duty pressure washer will do. These feature PSI ranging from 1500 to 1900 and would be enough to get rid of dirt and mild stains.
Choosing a Pressure Washer
Vinyl siding can withstand a powerful gas pressure washer (2,500-3,000 psi). Aluminum, stucco or soft-grain wood homes will do better with a less powerful washer (about 1,200-1,500 psi).
Simpson SuperPro Roll Cage 3600 PSI 2.5 GPM Gas
The best pressure washer for concrete and driveways is partly about combining mid-to-high-level PSI with excellent flow rates. As a professional, if you can score one that's easy to roll on and off the trailer multiple times a day, you're in business!
What is a good PSI for a power washer? A model that creates anywhere between 1300 to 1700 pounds per square inch of pressure is decent. The higher the pressure, the more powerful it is.
For instance a foundation is 3,000 PSI, sidewalks are 3,500 PSI, front steps are 3,000 PSI, etc. 3.) What are Typical Specifications for a Quality Sidewalk? Concrete for sidewalk slabs must consist of 3500 to 4000 PSI, a combination of 3/4 blend of sand, stone and cement and also 6 to 7% air included in the mix.
The higher the PSI the more durable your concrete will be and will thus be resilient to cracking. The average residential project uses a minimum of 2,500 to 3,000 PSI; however if you're concerned about cracking then we recommend talking to your concrete contractor about stronger products on the market.
While traditional concrete normally has a compressive strength ranging anywhere from 2,500 to 5,000 psi, UHPC can have a compressive strength of up to 10 times that of traditional concrete.
Reach for the 1500 PSI Pressure Washer and use the 40-degree nozzle to clean painted soft-wood surfaces, aluminum siding, and windows. Brick, stone, and vinyl can handle the higher pressure of the 1600 PSI model. For stucco, stick to the gentler cleaning power of the WORX Hydroshot described below.
For most cars, a psi between 1200 and 2200 is recommended. This range provides enough cleaning power to remove dirt and grime without damaging the car's paint or delicate surfaces. Yes, you can use soap with a pressure washer.
Use the right amount of pressure
Although many electric pressure washers produce a pressure of about 1900 psi, you should only use a water pressure of 1500 psi or lower on your car. You'll need to look for a low-pressure machine that's a bit less aggressive than the standard.
However, in general, a psi of 3000-4000 is commonly used for residential driveways.
Most electric pressure washers create 1300-1700 pounds per square inch of pressure (PSI) with a water flow of 1.5 gallons per minute (GPM), but experienced contractors recommend between 2000 and 3000 PSI and a flow of at least 2.5 GPM to clean dirty concrete effectively.
Any machine capable of producing at least 1,500 pounds per square inch (psi) of pressure can clean concrete, but the work will go much faster if you choose a model producing 2,500 to 3,000 psi, like the gas-powered option below.