Yes, pool steps can be added to any inground swimming pool. There are several types of inground swimming pool stairs to choose from, such as drop-in steps and built-in steps.
Add onto Existing: In most cases it's possible to be hot-tub ready by building a new spa right into the swimming pool remodeling and adding the required plumbing / equipment. This can be a little more costly than when building it new but it happens all the time!
Even without changing the size, depth, or shape, you can have a pool that is more your own and brand-new in many ways. The fact is, if your pool is 20 years old, materials have come incredibly far since then. There are a lot more options nowadays.
We're here to share our knowledge with you so you can make the best decision for your backyard—including details like steps and ladders. For an inground vinyl liner pool, you have these 3 options: White plastic steps (the standard) Vinyl over steps.
Above-ground pools can rise 4 feet or more off the ground, so installing a good set of pool steps to safely get in and out of the pool is a necessity. Stairs specially designed for above-ground pools allow swimmers to enter and exit the pool from ground level or via a pool deck.
A plastic, hand-size dumbbell set also can be used to hold the steps in place. You can secure one to each side of the step with a small plastic bungee cord or nylon rope. If the dumbbells are the type that you need to fill, use clean sand and make sure they are closed tightly.
If your ladder doesn't have a cavity to add sand or water, make your own weights. For example, fill plastic bottles with sand or water and tie them to the base of the ladder, or you use neoprene- or vinyl-coated exercise weights such as aqua-fitness weights, which are meant for use in underwater aerobics.
Steps are an essential element of pool design, flowing seamlessly into the pool's appearance and function. While they're typically built into the pool structure, they can be added during a renovation with our inground pool steps replacement services. Best of all, the project takes just two days from start to finish.
Most pools are 36" deep (from floor to mid-line of water tile) at the shallow end where the steaps are located, and 3 steps are pretty standard. The top step is usually about 3" under water, so that leaves 33" of depth to be covered by 3 steps.
Treads shall have an unobstructed horizontal depth of not less than 11 inches (279 mm).
Making a pool shallower is a faster and easier process, but both options are possible. The pool company will drain your pool to adjust the depth. To make a pool shallower or deeper, workers will first remove the bottom either with machinery or by hand. Then, they'll add or remove fill to reach the desired depth.
Changing the depth and overall “footprint” or shape of a pool are two of the most common projects. However, swimming pools can be modified or upgraded in many other ways. Sunning ledges are quite popular today, and many owners are having them installed on existing pools.
A tanning shelf or tanning ledge is the perfect feature to add to an existing swimming pool while under renovation. A tanning shelf is an area inside the pool perimeter that sits just about 6-8" below water.
Yes, it is totally possible to add a Hot Tub or Jacuzzi to your existing pool. Before you embark on the project, you need to have a clear plan of action. You need to understand how you are going to heat it, if you indeed are, as well as how you are going to control your jets.
Yes, changing a pool depth to make it less deep causes loss of water volume—and that's a good thing! First, let's break down what changes in your pool when you make its deepest area shallow. By reducing the depth, you decrease the overall volume of water the pool holds.
A concrete swimming pool typically has three entry steps at the shallow end with rounded edges and corners for safety, but the actual design and layout largely depends on the needs of the customer.
Ladder treads and recessed steps shall have a minimum tread of 5 inches and a width of 14 inches and shall be designed to be readily cleaned. Step risers shall be uniform and shall not exceed 12 inches in height. The first riser shall be measured from the deck.
All pools whether public or private shall be provided with a ladder or steps in the shallow end where water depth exceeds 24 inches (610 mm). In private pools where water depth exceeds 5 feet (1524 mm) there shall be ladders, stairs or underwater benches/swim-outs in the deep end.
You can buy fiberglass repair kits at many marine supply outlets and swimming pool stores. If you've decided to make a go of repairing your cracked steps yourself, then you need to ensure you make the proper preparations. You'll want your efforts to result in a repair that lasts for the long term.
Most pool ladders are quite lightweight and, when set in the water, tend to float. Lightweight pool ladders often have instructions from the manufacturer on how to weigh down the pool ladder to prevent it from floating up in the water.
I use 3 large round rocks to weigh down my wedding cake steps. It weighs the steps down, but allows me to move the steps easily for vacuuming. When we close pool, I just dive down, take out the 3 rocks and put down with landscaping.