How to fix backed up pipes?

Author: Prof. Ora Huels  |  Last update: Wednesday, February 19, 2025

Some drain issues require plumbing expertise, but others can be cleared up with these steps:
  1. Clear out standing water. ...
  2. Remove visible blockages and check garbage disposal. ...
  3. Try boiling water and salt, or vinegar and baking soda. ...
  4. Plunge it out. ...
  5. Clean the P-trap and snake it. ...
  6. Snake the drain.

How to unclog backed up pipes?

Boiling Water, Baking Soda, and Vinegar: Sometimes, a combination of boiling water, baking soda, and vinegar can help dissolve and dislodge minor blockages. Pour half a cup of baking soda down the drain, followed by half a cup of vinegar. Let it sit for a few minutes, then flush it with boiling water.

How do I clear a clogged main line?

Your step-by-step guide: How to clear a main sewer line clog
  1. Loosen the cap on the drain pipe. ...
  2. Allow any sewer buildup to come out of the drain. ...
  3. Gently feed the auger cable into the main line drain. ...
  4. Run the auger until the clog is broken up. ...
  5. Hose out leftover debris. ...
  6. Pull the auger cable back out of the main line drain.

How much does it cost to fix a backed up drain?

Simple sink, shower, or toilet clogs – $100 to $250 per drain. Kitchen sink or laundry drain cleanout – $150 to $275 average cost. Main sewer line augering – $200 to $500 per cleaning.

Is a backed up drain covered by insurance?

Any water that backs up from sewers, drains, or overflows from a sump pump typically isn't protected under standard homeowners insurance policies. So, even if you have a separate flood insurance policy, chances are your water back-up issue won't be covered.

How Pipes Are Professionally Cleaned and Relined | Art Insider

How much does a roto rooter charge to unclog a drain?

You'll likely pay between $300 and $450 to unclog your toilet with Roto-Rooter. However, the price could change depending on if the clog has caused a lot of damage, which your plumbing pro will want to inspect during your service appointment. Keep in mind that you won't get a quote from Roto-Rooter over the phone.

What do plumbers use to unblock drains?

Properties and Uses: Hydrochloric acid, also known as muriatic acid, is a highly corrosive acid used extensively by plumbers to clear severe clogs. It reacts rapidly with organic materials in drains, breaking them down into simpler compounds that can be easily flushed away.

How to clear blocked water pipes at home?

How to Clean Your House Water Pipeline: A Simple and Effective Guide
  1. i. Turn Off the Water Supply. ...
  2. ii. Drain the Water. ...
  3. i. Remove Faucet Aerators and Showerheads. ...
  4. ii. Flushing the Pipes. ...
  5. i. Use a Disinfecting Solution. ...
  6. ii. Allow the Solution to Sit. ...
  7. i. Flush the Pipes. ...
  8. ii. Reinstall Faucet Aerators and Showerheads.

How do you clear a clogged pipe without a snake?

This technique is a classic – and one of the most popular DIY drain unclog methods. Pour one cup of baking soda and one cup of vinegar down the drain and allow it to work its magic overnight. The next morning, flush the drain with boiling water. Repeat if necessary.

How do you know if your main pipe is clogged?

Watch Out for These Four Signs of a Clogged Sewer Line?
  • All Your Drains Reek. It's not uncommon to have a single drain that emits a foul odor. ...
  • Your Drains Are Blocked or Slow-Moving. ...
  • You Hear Loud Gurgling Sounds Coming From Your Pipes Throughout Your Home. ...
  • You Have an Unnaturally Lush Landscape or a Smelly, Sunken Lawn.

How much is it to unclog a sewer line?

You will likely pay around $350 to $650 to have a plumber unclog a main sewer line unless you have complications like serious damage to the line.

Will Drano unclog the sewer line?

No, Drano® is not recommended to clear a clogged sewer line. Bottle unclogging solutions are designed for minor clogs and are not strong enough to break up more extensive sewer line blockages.

How to clear a main line blockage?

By inserting a long, flexible tool into the drain, you can reach down to dislodge the obstruction. Ensure you're careful and gentle to avoid any pipe damage. Put on gloves and clear the area around the drain. Using a manual drain snake tool, feed the snake tip into the drain and push it toward the clog.

How much does hydro jetting cost?

Hydro jetting costs $475 on average but range from $350 to $600. A plumber can give you a quote and get rid of your sewer clog. Having to keep your plumber on speed dial is no fun for any homeowner. If chronic sewer clogs are giving you issues, it might be time to call in the big guns.

How do you get a blockage out of a pipe?

A straightforward yet effective approach to addressing a clogged drain pipe involves simply using hot water mixed with dish soap. This method, ideal for tackling minor blockages, leverages the degreasing power of dish soap combined with the force of hot water to dislodge and dissolve clog-causing residue.

What's the best thing to unblock pipes?

#1: Use baking soda and vinegar

Let it sit for an hour or more (or overnight if you suspect the blockage is really bad) and then flush with hot water. In theory, the blockage should be gone but repeat the process if you experience further problems.

How to flush pipes in a house?

Begin the flushing procedure by opening the hot water taps in your bathroom(s). Open ALL hot water sink fixtures, hot water bathtub or shower fixtures. Next, open all other hot water fixtures, such as in kitchens, wet bars, etc. Run all of these hot water fixtures for 15 minutes, then shut the water off.

How do you unclog a pipe when nothing works?

One option is to use a drain snake or auger to physically remove the clog. Another effective technique is to create a chemical reaction using baking soda and vinegar. Pour half a cup of baking soda down the drain, followed by one cup of vinegar. Let the mixture sit for about 30 minutes, then flush with hot water.

Why should you never use baking soda and vinegar to unclog a drain?

The fizzing reaction and gas created may help loosen some small blockages. However, it is not typically strong enough to break down larger clogs or remove hard-to-reach debris. As a result of the above facts, if you have a serious drain clog, using baking soda and vinegar is unlikely to be effective.

What is the strongest chemical to unclog a drain?

The Santeen Sulfuric Acid Drain Opener proved to be the most potent among all the chemical drain cleaners we tested, effectively dissolving 80% of the hair, 80% of the organic matter, 40% of the grease and 76% of the paper products.

What do plumbers do for clogged drains?

Plumbers choose hydro jetting equipment for the most stubborn, deep-set clogs. This drain clearing tool uses high-pressure water to flush your pipes and remove years of buildup. The water jet is so strong that it can even break up any tree roots that have found their way into your sewer line.

What is the cheapest way to unclog a drain?

Salt and Baking Soda

Salt is a cost-effective alternative that works well for minor clogs. Mixing half a cup of table salt with baking soda and pouring it down the drain before adding boiling water can help break down grease and debris.

What happens if Roto-Rooter doesn't work?

If the Roto-Rooter machine can't get through the pipe, your service technician can request a video camera inspection of the sewer pipeline to ascertain where the blockage is and its cause. A trained eye will then be able to recommend repair options to the homeowner.

How much does it cost for a plumber to unblock a pipe?

Type of Blockage

The overall cost of drain unclogging will depend on the blockage type, for instance, a small blockage in a toilet or sink is normally only priced at around £50 to £70. However, a more extensive blockage deep in your drains could end up costing you around £150 to £200.

Previous article
Can you run AC without refrigerant?
Next article
Where to clip pothos for propagation?