Yes, it is possible to paint cabinets without sanding.
Another method for painting kitchen cabinets without sanding, is to use chalk paint, or milk paint. These paints bond to a surface without much prep, but they do require a sealing product to make them last. Check out these chalk paint kitchen cabinet tutorials!
If you don't clean before sanding, contaminates (like cooking grease) will be pressed down into the wood. Contaminates will keep the soon be applied paint for sticking. You can remove the doors here in the process or wait until after you wash them down. It is totally up to you and situational dependent.
Wood cabinets are ideal for painting, but any surface that can be scuffed with sandpaper can be painted. Laminate cabinets require a special bonding primer. The laminate must be in good condition for best results. Choose a high-quality paint.
If you don't want to sand before you prime, use some mineral spirits and a rough sponge to clean and lightly rough up the cabinet area you're painting. This doesn't open up the wood cabinet material as much as sanding but does get you some additional grippy area for the primer to adhere to.
Painted cabinets should get a thorough sanding with 120-grit paper, but no matter the finish, do a final pass with 220-grit. Use a sanding sponge to dig into any tough areas that need special attention or corners that are hard to get with your sander.
While priming never hurts, whether it's necessary or not is determined by the type of paint (oil or latex) currently on your cabinets and the type you plan to use for repainting. If you're changing the type of paint or painting over natural wood cabinets, then it's important to prime the cabinets first.
Can you paint veneer cabinets? You sure can! The key, like for any painted project, is in the prep and choice of primer and paint. Proper cleaning to remove all the grime and dust, sanding the right amount, and using the right adhesion-promoting primer can make a huge difference in the durability of the finish.
While oil-based paints make a case for themselves with their reputation for easy application and a long-lasting finish that can be scrubbed and cleaned regularly, latex paint is widely regarded as the best choice for most kitchen cabinets, since it offers lower levels of VOCs and is quicker to dry.
Wood, wood-laminate and metal cabinets usually can be repainted without difficulty. Plastic laminate cabinets might not accept a topcoat of paint — those that can be refinished often require special paints and techniques, and results can vary.
You can use liquid dish soap such as Dawn, Simple Green, M1 liquid deglosser, TSP, or you can use a product called Krud Kutter. A green Scotch-Brite pad works great to scrub all surfaces. You need to pay close attention and make sure you remove any grease and grime before painting your kitchen cabinets.
Two coats of paint are essential for cabinets—you're building a surface. By the way, to get the nicest finish, use a brush, a 2- to 2 1/2-inch fine bristle brush. Whatever paint you use, ventilate the room—direct a fan out the window—and wear the masks they sell in paint stores.
For wood, brushing is fine, but you may want to hire a professional for a good finish. Using a roller to paint cabinets is a lot faster than brush painting, however, the fabric on the roller will create a 'bobbly' texture on the surface. The texture a roller puts on cabinets makes it unsuitable for gloss paint.
Brushing allows the painters to apply the color directly to the surface of the cabinets, only wasting the small amount left on their brushes at the end of the project. Spraying atomizes the paint, meaning some of the droplets inevitably float away, and any paint left in the tubing of the sprayer goes to waste.
Rollers are not as consistent. The paint is applied unevenly. So, if you want a factory-grade finish, choose to spray your kitchen cabinets instead of rolling them. In addition to providing a higher-quality final finish, spray painting is faster than using a roller.
It is generally not recommended to paint over varnished wood, but you can paint over it without sanding it. If you want to protect the surface permanently, you can use Chalk paint and seal it with a top coat. Or, you can use a special bonding primer to prepare the surface for painting without sanding it first.
Using Oil Bond: The Latex Paint Additive
Particularly in places like kitchen cabinets, bathroom cabinets, trim, doors, built-ins, painted furniture and windows, Oil Bond gives painters the ability to create powerful, professional-grade adhesion, all without sanding or priming.
You can use any type of acrylic you like for painting on wood. Take a look at our brilliant range of acrylic paints here if you are looking for some. Use a wide, flat paintbrush to apply the paint to the wood. Allow the paint to dry before applying a second coat, and then paint the back if you wish.
Yes You Can Paint Laminate! What is laminate, you ask? It can basically be any type of furniture, cabinets, or wood-like product that is made by attaching a thin layer of printed plastic (sometimes called Melamine or Thermofoil) to a substrate of plywood or particle board.
A sure way to recognize wood laminate is when the grain does NOT follow through your piece. Wood Veneer is a sheet or thin layer of 'quality-natural-hardwood' that is adhered to a lesser quality wood surface. Wood Veneers give the impression of a more desired quality wood without being as costly.
You don't have to remove the cabinet doors to repaint them, so leave them on their hinges if you're not going to replace them. However, it is easier to paint the cabinet's façade with the doors off. You can paint the hinges to match the cabinets or mask them with painter's tape to keep them as they are.
Detailed Patterns, Warped or Damaged Cabinets
If your cabinets have detailed patterns or they are warped, chipped, cracked or have other damage to them, then painting your kitchen cabinets is not the way to go – it most definitely won't solve your cabinet problem.