Pine-Sol is safe on hardwood floors and can be used to clean and disinfect them. What is essential is to use the right concentration and correctly follow the instructions: Sweep or vacuum the floor to remove loose dirt and debris. Take ¼ cup of Pine-Sol and mix with a gallon of water in a bucket.
You can also use Pine-Sol® Original Squirt 'N Mop®. It's safe for wood and hard, nonporous surfaces. You can apply it to the floor directly from the bottle.
In most homes, the best wood floor cleaner is plain old soap and water, and the only tools you need are a broom, vacuum, and mop. The best mop for wood floors is a microfiber flat-head or string mop you can easily wring out.
Usually no rinsing required. On wood surfaces, do not allow puddles of cleaner to remain. *Not recommended for use on unfinished, unsealed, unpainted, waxed, oiled or worn flooring.
Don't use straight ammonia, alkaline products or abrasive cleaners. They'll dull or scratch the finish. Don't rely on lemon juice or a vinegar-and-water solution to clean hardwood floors. "I don't recommend using vinegar or lemon juice, at least not in large quantities, as these can damage the floor's seal," said Wise.
What is this? Pine-Sol is more acidic than Fabuloso, which gives it an advantage in breaking down stubborn stains and complex messes caused by grease. Pine-Sol Original is the only liquid cleaning solution that disinfects.
Well, you can use Fabuloso to clean your wood floors. It's a great multi-purpose cleaner that you can use to clean practically any surface in your home.
A: Yes. Original Pine-Sol® Multi-Surface Cleaner is registered with the EPA as a disinfectant when used as directed full strength. When used according to the instructions on the product, it kills 99.9% of germs and household bacteria on hard, nonporous surfaces.
A mixture of 1 part Chlorine Bleach, (Clorox) to 32 parts water (½ cup bleach per gallon of water, or 4 teaspoons bleach per quart of water) will need to sit on surfaces for 5-10 minutes in order to disinfect them. We found this did not harm either of our wood finishes.
Use a damp-mop with a flat-head mop and microfiber pad or a microfiber string mop that has been thoroughly wrung out when it looks dingy. Move with the grain, and control the amount of cleaning solution by using a spray bottle, aiming for a heavy mist or gentle squirt of about a half teaspoon per 2 square feet.
Whether you're cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors.
An alternative natural cleaning solution is warm water and dish soap (1/4 cup of dish washing liquid for a bucket of warm water). For spot cleaning needs, sprinkle baking soda on the affected area and scrub with a sponge. To ensure the area is thoroughly clean, rinse with warm water and dry.
a disinfecting solution of 1/2 cup Clorox® Disinfecting Bleach and 1 gallon water. the area, then mop or wipe with the disinfecting solution. for 5 minutes, then rinse thoroughly. Air dry.
The best way to clean hardwood floors is to adopt a regular routine. Use a broom or hardwood floor mop for cleaning wood floors daily. A microfiber dust mop pre-treated with a dusting agent will pick up dust and dirt and prevent scratches. Vacuum your hardwood floor once a week.
Pine-Sol® Cleaners are concentrated formulas that you can dilute for most jobs. For general cleaning, a 24 oz. bottle gives you 12 gallons of cleaning power! Add water to the formula yourself and save.
Pine-Sol is a registered trade name of the Clorox Company for a line of household cleaning products, used to clean grease and heavy soil stains. Pine-Sol was based on pine oil when it was created in 1929 and during its rise to national popularity in the 1950s.
What are the ingredients in Fabuloso® or Fabuloso® Complete? Fabuloso® Complete Sparkling Citrus Ingredients: Water, Sodium Dodecylbenzenesulfonate, Sodium Chloride, Lactic Acid, C9-11 Pareth-8, Fragrance, Colorant.
Such products have a high potential of ruining the finish of your wood. They can react with the polyurethane seal, completely destroying it, or create an unsightly, sticky, oily residue that can make your floor cloudy or slippery.
Homemade dish & hand sanitizer / 3 parts dawn , 1 part fabuloso 1/2 part bleach. Cleans, smells great, and disinfects.
Lysol can be hard to find online and in-stores, but Pine-Sol seems to still be available at most retailers. Compared to Lysol, Pine-Sol has a longer contact time (Lysol's ranges from 2 minutes to 5 minutes) but will still effectively help you to limit your contact with the virus.
Common household white vinegar is an effective cleaning substitute for Pine-Sol. Vinegar is nontoxic and since it is acidic, also dissolves stains on hard surfaces. Also, priced at just a few dollars a gallon, vinegar is less expensive than Pine-Sol.
Finally, when used and applied the right way, Pine Sol doesn't leave behind any residue that will leave you with an unsightly hardwood floor surface. Wax and oil-based cleaners, on the other hand, leave behind a hazy residual substance.