A: YES, Flex Paste can be applied on dry or wet surfaces and even underwater. It won't dissolve or wash away and even dries underwater. For best results apply a generous amount to the surface using firm pressure. This will help push the water out and allow better contact to the surface during application.
Although Flex Seal Liquid has not been tested for its maximum resistance to chlorine, it will withstand the levels found in tap water.
A: YES, Flex Paste can be applied on dry or wet surfaces and even underwater. It won't dissolve or wash away and even dries underwater. For best results, apply a generous amount to the surface using firm pressure.
If an emergency occurs, Flex Seal can be applied on a wet surface or in a moist environment. The surface will always adhere better to a clean, dry surface, however. It is recommended that you reapply Flex Seal once the area is completely dry in order to ensure its longevity.
A: Depending on the environment, coats added, and maintenance, many people have found Flex Seal will last for years without cracking, peeling or losing any of its strength or sealing properties.
The Flex Seal Liquid adheres to most surfaces, including metal, but not silicone.
It will work great. This stuff is amazing. You can seal your pool liner and it will last and last. 15 of 19 found this helpful.
Flex Seal can be used on almost every surface: wood, metal, tile, concrete, masonry, fabric, glass, plastic, aluminum, porcelain, drywall, rubber, cement, and vinyl. Plus, it won't sag or drip in the summer heat, and it won't crack or peel in the winter cold.
But yes, Flex Seal can be used on any wood project. It makes a nice coating for any outdoor furniture by waterproofing, coating, and protecting it. It also helps prevent wood rot.
Q: What temperatures will it withstand? A: Flex Seal Liquid has a wide temperature range from -80 to 350 degrees Fahrenheit. For best results, we recommend applying it to surfaces and substrates in temperatures between 32 and 120 degrees Fahrenheit.
Just cut, peel, stick, and seal!
And stick the adhesive side of your waterproof tape to a clean, dry surface. Hold the Flex Tape® to the surface with pressure. Use your fingers to remove any air pockets or air bubbles. It really is that easy.