Cleaning your pavers with bleach has a lot of benefits: Disinfecting the Surface: Bleach is an effective disinfectant and can kill any bacteria or mold on the surface. This will help to prevent any health hazards from occurring. Removing Tough Stains: Bleach is also effective in removing tough stains from the surface.
Bleach: This alkaline solution may be effective for other household uses, but it can discolor concrete pavers that have been colored or stained.
Whether your patio is sealed concrete or cement, or even sealed concrete pavers, a bleach and water solution makes it easy to clean away built up soil, stains from leaves and pollen, mold, mildew and algae.
Usually, hosing them down once a month is sufficient. Use soap and water, if the pavers are still dirty after sweeping and water hosing, make a solution of soap and water. You can use dish soap, laundry detergent, or any type of general-purpose cleaner. Never use bleach on your pavers, as it can damage the surface.
Mild detergent and water.
Mix some mild dish soap with water in a bucket to create suds, then use a brush or a sponge to scrub the surface of the pavers. If your pavers are textured or have intricate designs, this cleaning method can be gentler than a power washer.
A dish soap, like Dawn, is a safe place to start. The surfactants in dish soaps are designed to remove oil and grease, they're gentle enough to be used without issue on your pavers. In a bowl or bucket, mix the soap with water and pour it onto the stain and agitate. Rinse and repeat if needed.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
Use Vinegar or Bleach
If you are going to try this approach to remove mold or algae, first try a mixture of white vinegar and water to spray down the area and kill the mold.
Use Bleach
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
First, you'll need to make sure that there's no run-off of the bleach onto any surrounding plant life. Plants that come into contact with bleach will die. Second, bleach isn't suitable for man-made concrete slabs – only natural paving stones. Bleach will fade artificial slabs over time.
For human-made colored concrete paving slabs or concrete pavers, we don't recommend the use of bleach for cleaning. That's because the substance could fade your paver colors if regularly cleaned with bleach over a long period.
White Vinegar and Water: A more natural way to touch-up your concrete pavers or paver stones is to use a mixture of water and white vinegar. Let the vinegar mixture sit on the pavers for about an hour before using soap and water to scrub away any stains.
Although the concrete is disinfected after just 5 minutes, lightening it will take a little longer. Leave the bleach solution on the concrete for about 20 minutes, then sweep briskly with the stiff broom to dislodge the softened grime. Use the scrub brush to tackle stubborn areas. Rinse off the patio.
Regular Soap and Water
A solution of regular dishwashing soap or hand soap is simple to create, and it will remove mild to moderate dirt, stains, and grease. Just mix your soap and some warm water in a large bucket and you're ready to start cleaning.
White vinegar is good for cleaning pavers, though it's also acidic enough to erode the stones' surface. Diluted vinegar can be used safely to clean paving stones, though it should be used sparingly and infrequently to protect your paving from damage.
Baking soda is an amazing household cleaner, and it can work really well on your pavers too.
Simply put, black stains on flagstones are caused by certain types of mold and mildew. These fungi find their way onto the stones either from their spores landing on the stones or from simply extending onto the stones from patches of mold or mildew right beside them—a pretty common occurrence for garden pavers.
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
Can you power wash pavers? Power washing (also known as pressure washing) is also a very effective method by which you can remove dust deposits and various stains from your pavers. Just make sure that the water jet is not directed directly at the joints between the paving stones.
Simple Green is one of the best cleaning products for dirty pavers. It doesn't have any harmful chemicals that could possibly warp your precious driveway. Less chemicals mean there's a less likely chance your paver stones will change to a weird-looking color.