Can You Clean Toilets With Coca-Cola? Yes, although we don't recommend using Coca-Cola every time your toilet needs a good scrubbing, as the dark color of the carbonated soda can actually stain the bowl and leave a sugary residue when used excessively.
Pour white vinegar into the bowl to cover the stained areas. Let the vinegar soak for 30 minutes to an hour. Scrub the stained areas with a toilet brush. If the stains persist, sprinkle baking soda on the remaining stains and let it sit for up to 10 minutes, then scrub again with the toilet brush.
By pouring a caustic soda (coke, for example) into the toilet bowl, you can speed the dissolving process along considerably. Simply dump a can of cola in the water and let it eat away at the debris. Just be sure never to flush the toilet when the water level is already high.
A special tip: Coca Cola – this fizzy drink contains phosphoric acid which also removes limescale and urine scale. Simply pour the contents of a one-litre bottle into the toilet bowl and leave it to work for a few hours to dissolve deposits.
Grab a toilet brush and a bathroom cleaner (or toilet bowl solution), and scrub diligently. Pay close attention to areas around the rim where water flows into the bowl. If the water in the toilet goes from brown to clear due to your cleaning efforts, then the problem is resolved.
You can either pour cola directly onto the stains themselves or cover the entire inside of the bowl by putting cola into a spray bottle and spraying on a light coating. Letting the cola sit for several hours will improve its effectiveness. Before flushing, use a toilet brush to scrub away the stains and flush.
Clean Your Toilet Bowl with Coca Cola
To try this method, simply pour one litre of Coca Cola into the toilet bowl and leave it to sit for an hour. This gives it time to work its magic. Come back an hour later and give the toilet bowl a thorough scrub before flushing and you'll find no more limescale!
In conclusion, leaving vinegar in the toilet overnight is not recommended as it can cause damage to the porcelain surface. The best way to clean a toilet is with a mixture of baking soda and white vinegar, followed by regular cleaning with bleach or other cleaning products for tougher stains or odors.
Depending on how bad the stain is, you'll either wait between 2 hours or overnight. Once your waiting time is up, unhook your ball valve and allow it to float - slowly filling up your cistern. When the toilet is ready, flush it. Now that you've flushed the coke you can grab your toilet brush and start scrubbing.
The truth is, they're actually super easy to fix! Bleach only masks the problem—it doesn't get rid of it for good. Instead, try citric acid and a toilet pumice stone for a permanent solution. 🧽✨ Citric acid breaks down those mineral stains, and the pumice stone gently scrubs them away.
Our favorite, editor-approved toilet bowl cleaner is the Lysol Power Toilet Bowl Cleaner. It's an easy-to-find cleaner that works great on tough stains, has a clean scent, and lasts for a long time.
While hard water stains are certainly difficult to remove, they are not permanent. There are several effective, non-toxic cleaners you can use to remove pesky hard water stains from your toilet bowl, including baking soda and vinegar, Bon Ami or Bar Keepers Friend, and borax.
The two main causes are: Mold or Bacteria – Stagnant water in your toilet, pipes, or water heater can cause the growth of mold or bacteria, which then discolor the water. Sewage Backup – A more alarming cause is a sewage backup, where sewage water is being pushed back into your home's plumbing.
Use vinegar or another acidic cleaner to clean calcium buildup from your toilet. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.
By adding water to your soft drinks, the only thing you are reducing is the taste; it won't be as sugary as it should be but in the real sense, the calorie of the drink is still the same.”
While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom). All you have to do is spray it on the desired section of the toilet, wait a few minutes, then scrub it away with a toilet brush.
White vinegar
The mild acid can dissolve limescale and disinfect. All you need to do is pour a generous amount of white vinegar down your toilet bowl, let it soak in overnight, then scrub with a brush. Then flush to rinse, and voilà, your toilet is back to its former whiteness!
Citric acid
More importantly, it's probably even more effective than vinegar for getting rid of that brown stain in the toilet. Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight. The next day, scrub and flush.
Flush the toilet to wet the surface of the bowl. Fill a spray bottle with white vinegar and heavily mist the bowl surface. Allow the vinegar to sit for half an hour. Use a toilet brush to scrub away any stubborn stains.
Try this: Swish a cup of vinegar around in the toilet bowl using a toilet brush, then add a cup of baking soda, followed by an additional cup of vinegar. Let the fizzing solution sit for 10 minutes. Use a toilet brush to scrub stains. Let mixture sit for a few more minutes and then flush.
Coca‑Cola contains phosphoric acid, a safe food ingredient used in some of our beverages which can help clean off dirt. However, because Coca‑Cola is a beverage, not a cleaning agent, it isn't effective at killing germs, and there are lots of products that are much better at cleaning.
For older stains, using an industrial-strength cleaner like CLR should do the trick. Another less conventional strategy you can try is removing the stains with Coca-Cola. To do this, simply pour a full can of Coke into the toilet and let it sit in the bowl overnight. Then flush the toilet the next day.