However, as Taste of Home explains, borax can help you clean your toilet bowl effortlessly. Simply sprinkle about 1 cup of the powerhouse powder into your toilet and allow it to sit overnight — it'll make it so you can easily scrub away anything in the bowl and leave it sparkling clean and fresh.
Borax and vinegar
Pour about ¼ of a cup of Borax into the toilet bowl and mix it around the bowl with your toilet brush. Step 2: Add about 1-2 cups of vinegar and let the solution sit for 20-30 minutes. Step 3: Scrub the toilet bowl to help remove the stains and then flush.
1. Toilet Cleaning. Sprinkle 1/2 cup of Borax and ½ cup of white vinegar into your toilet bowl, ensuring you reach all areas (including under the rim). Leave for at least 8 hours (or overnight) then scrub thoroughly with a brush before flushing.
Try this: Swish a cup of vinegar around in the toilet bowl using a toilet brush, then add a cup of baking soda, followed by an additional cup of vinegar. Let the fizzing solution sit for 10 minutes. Use a toilet brush to scrub stains. Let mixture sit for a few more minutes and then flush.
First, flush the toilet and then pour a quarter of a cup of Borax into it, using your toilet brush to swish it around. Next, add one to two cups of vinegar and let the mixture sit for 20-30 minutes. You should be able to scrub the stains away and flush the toilet to reveal a fresh, and clean bowl.
This naturally occurring mineral is a powerful stain remover, disinfectant and deodorizer, and it's safe for all surfaces as well as septic systems. Borax works well on tougher stains, including mineral residue from hard water. It's also handy for regular cleaning of the toilet bowl and exterior toilet surfaces.
Citric acid
More importantly, it's probably even more effective than vinegar for getting rid of that brown stain in the toilet. Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight. The next day, scrub and flush.
Because water deposits build up under a toilet's rim, it can take only 24-48 hours for colonies to start breeding. As it grows, you will see what looks like black debris or rings inside the bowl. This can cause respiratory problems for people as the mold and mildew release tiny spores into the air.
White vinegar is an excellent choice for dissolving hard water stains in your toilet bowl. It has enough acidity to break down the layers of mineral deposits but won't burn a hole in your pocket. Baking soda adds its good share of dissolving power, too.
That brown toilet-bowl stain isn't what you think it is
It's actually due to high concentrations of minerals in hard water, like calcium, iron, and manganese, that build up inside the toilet bowl over time, according to Hunker. In particular, iron oxide, or rust, is the main problem.
Borax has long been recognized for its disinfectant and deodorizing properties. Mix a 1/2 cup of Borax into 1 gallon of hot water or undiluted vinegar and clean with this solution. For a fragrant smell, add a few sprigs of fresh thyme, rosemary or lavender to the above recipe.
In the large bowl, mix ½ cup of Borax and 1 pint of hot water if you are putting the solution on upholstery. If you will be using the solution on a carpet, then use ¼ cup Borax, ¼ cup Salt and ¼ cup Vinegar. Use your sponge or towel to apply the mixture to the stain.
Vinegar and Borax Are Safe to Use In HE Washers.
You can also unclog your toilet using borax. Scoop out as much water as you can from the bowl, and then add a half a cup of borax powder. Let it sit for 15 minutes, then pour 2 cups of boiling water in, and flush. Repeat as needed.
It mixes nicely with lemon, vinegar, and water for cleaning purposes, and is safe for use on any surface, including tile, ceramic, porcelain, slate, marble, granite, and stainless steel. Borax is a great DIY cleaner and here are 10 easy ways you can use it.
Borax Substitute is sodium sesquicarbonate – a mineral compound, with similar pH to borax, making it ideal for cleaning and laundry. It is gentler than Soda Crystals yet stronger than Bicarbonate of Soda.
Barkeeper's Friend has a thick cleaner that may be useful for this task. Use a plunger to force as much of the water out of the toilet as possible, and apply the BKF to the inside of the entire toilet bowl. If the stains remain, it may be time to give in and use a pumice stone.
Vinegar is a natural acid that can dissolve calcium deposits. You can pour vinegar into the toilet bowl and let it sit for a few hours before scrubbing with a toilet brush.
To prevent calcium carbonate from piling up into your cistern, pour a single cup of white vinegar into it. The mixture should be three parts white vinegar to one water. After you pour it into the cistern, mix it slowly and carefully until it's evenly distributed.
If you have a stubborn toilet bowl ring, cut off a piece of a Mr Clean Magic Eraser and let it sit in the bowl overnight.
In general, you should give your bathroom a good clean at least once a week. This includes wiping down the toilet and sink. The floor and bathtub should be cleaned every two weeks or so. It is also important to invest in a deep clean every month or so.
A much better solution is to use some WD-40 Multi-Use Product. Most people don't know that WD-40 can solve many of their household cleaning needs quickly and easily. When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it.
Borax is a fantastic cleaner that can be used to remove hard water stains in the bathroom. Pour ¼ cup of Borax into the toilet bowl and use a brush to scrub the bowl. Put 1 cup of vinegar into the toilet bowl and allow this solution to sit for 20 mins. Scrub the bowl with the toilet brush and flush to rinse.