When it comes to mounting door stops, the general recommendation is to install them on the skirting board whenever feasible. This placement keeps them out of the way, as the area behind doors is typically not where people walk, making them less obtrusive.
Be sure to install your door stop vertically under wherever the door handle is, as this will minimise the force on the door's hinges when it's being opened and closed and will reduce any flexing to the door.
When it comes to residential door stops, there are two common types: stops that mount on the hinge pin (aptly called hinge pin stops) and stops that mount in the baseboard along the wall.
It should be tall enough to prevent the door from hitting a wall, skirting board or furniture, but not so tall that it becomes a tripping hazard. Similarly, the size of the doorstop should be appropriate for the size and weight of the door.
The choice of material influences the slab thickness, which typically ranges between 20mm and 40mm. Ensure that the slab thickness plus an additional 10mm is considered when measuring the space from the top step to the door entrance. Step Rise: Aim for a rise (height) of each step between 150mm and 170mm.
While commonly placed on exterior doors to block chilly air, door draft stoppers also work on interior doors to help regulate temperature between rooms and even reduce noise. In summer, they keep cool air in and critters out.
A doorstop (applied) may also be a small bracket or 90-degree piece of metal applied to the frame of a door to stop the door from swinging (bi-directional) and converting that door to a single direction (in-swing push or out-swing pull). The doorstop can be a separate part or integrated with a hinge or door closer.
Secure the stops
Place the top stop piece against the marked line on the head jamb and secure it with nails or fasteners. Position the side stop pieces against the marks on the jambs, ensuring a consistent gap between the stop and the closed door (around 1/8 inch is ideal to account for paint or future adjustments).
The 50 Percent Rule
Generally, vertical trim elements such as door and window casings should be smaller and have less heft than baseboards. So I've found that a good rule of thumb for sizing window and door casings (or door trim sizes) is to keep them at about 50 percent of the height of the baseboard.
Door stops are one of the most functional and necessary items in home hardware. Door stops are intended to keep your door knobs and door levers from impacting the wall behind the door, and inflicting damage on the drywall.
When it comes to mounting door stops, the general recommendation is to install them on the skirting board whenever feasible. This placement keeps them out of the way, as the area behind doors is typically not where people walk, making them less obtrusive.
Also note that it works better on carpeted floors than bare floors. If there is any grit on the bare floor, the bottom pad on the bar is more likely to slip and not hold its position making it more possible for the door to be pushed open even when the bar is in place.
While they can help you save on energy costs and work well for interior doors if you're trying to conserve energy by only heating or cooling specific rooms in your home, draft stoppers are no substitute for properly weatherstripping your exterior doors and windows.
For a more permanent solution to draughts coming underneath external doors, try installing a brush strip draught excluder on the doors bottom edge. Brush draught excluders are a length of uPVC or metal that screws to the bottom of a door, with a tight, thin brush running along it between the door base and the floor.
A door closer should never be mounted to the outside of a building. The exposure to weather and vandals makes the installation very unsafe and will greatly reduce the lifespan of the door closer. Top jamb, parallel arm mount, and drop plates, allows door closers to be installed on interior push side of any door.
The height of your front entry step (called Risers), according to code, can be no higher than 7 3/4 inches . The part of the front entry step you actually step on (called Treads) can be no less than 10 inches. All Risers (the height of the steps) and Treads (the part you step on) must all be the same; uniform.
The "rise" is the height of each step, and the "run" is the depth of each step. For outdoor stairs, a good rise is usually between 4 to 7 inches, and the run is typically between 10 to 14 inches.
In general, the gap beneath an interior door will be between three-quarters of an inch and half an inch. This width depends largely on the type of flooring, as door frames are generally installed when the floor is unfinished. A standard door can have varying levels of clearance over different flooring types.