Decide where you want to install the infrared heater In a new house or after renovation, it is best to provide electricity where the
It reduces the like-for-like wattage, which means low electricity usage in the long run. With infrared heaters, you can only heat the room you are using. Unlike central gas heating, for example, you need to heat the entire house, even if you use a single room. Infrared heaters can be programmed as per your need.
The short answer is yes, infrared heaters can heat a house. In fact, they're great for keeping your entire home warm. These modern electric heating solutions offer a deep level of warmth for your living room, bathroom, bedroom and even your garden.
Q: Are Infrared Heaters Safe? A: The simple answer to this question is yes. They are 100% safe!
Near IR can be harmful to the eyes because it penetrates as far as the cornea (Voke, 1999). Uncontrolled, frequent, or long-term exposure to Near Infrared can also cause thermal burns and ageing effects such as “Bakers Arms” or “Glassblowers Face” (Cho & others, 2009).
But don't worry, infrared heaters are incredibly efficient. They're designed to keep a space warm while using as little electricity as possible.
Infrared heater energy consumption is much less than other forms of heating systems due to their direct method of transferring heat, as outlined earlier. As a result, you can expect your energy bills to be significantly lower over traditional electric or gas heaters.
Depending on its intensity, proximity and the duration of exposure, infrared radiation can be harmful to the eyes as well as to the skin. The eyes generally react much sooner and are much more sensitive than the skin to the effects of IR radiation, which can be harmful from a certain degree of intensity and exposure.
Infrared panels are made for continuous operation over many hours. Once turned on, they'll heat up in a few minutes and can be left running for extended periods of time without issue. With the incorporated safety features, if the panel gets too hot, they will automatically shut off until the temperature has reduced.
In the bedroom, it's better to place a panel on the wall opposite your bed, or to the side, rather than immediately behind your head. This will allow the infrared heat to disperse across your whole bed and gently warm you.
Quartz infrared heaters offer very fast heat-up and cool down times. Ceramic heaters, however, require more time to heat circulating air and warm up the room via convection. Quartz heaters can be used to create quieter heating equipment as in most cases air movement from noisy convection blowers is not needed.
During testing, we were not only impressed by how realistic the heater was in replicating the appearance and ambiance of a real firebox but also by how well the heating worked. With 5,200 Btu, it can heat up to 1,000 square feet.
With the same efficiency, an infrared heater consumes 30% less energy than a convection radiator. The choice is yours, let your apartment, office or country house will always be comfortable and warm!
Infrared panels are suitable for all-day heating.
The gradual build-up of heat ensures a comfortable environment, allowing them to be left on for extended periods without making a room feel stuffy.
Runs on expensive electricity – Infrared panels use electricity, which is currently more expensive than gas (from 1st January 2025 to 31st March, costs will be 24.86p/kWh vs. 6.34p/kWh respectively). While their efficiency can lower energy bills, electricity prices may still impact overall savings.
As their use isn't widespread (just yet at least), you may be curious to know how long it takes these panels to warm up and heat a room. In most cases, they are very quick to warm up and can reach full temperature in less than 10 minutes.
That being said—radiant heaters like infrared floor, wall, and ceiling heating systems directly convert electrical energy into heat without affecting air moisture levels. They transfer warmth to boundaries such as floors, walls or ceilings. By doing so, they warm up surfaces in the room instead of the air.
We understand why people look at infrared heating—it sounds energy efficient. But in reality, infrared heaters need to stay on longer to maintain warmth, and because they only heat what they directly touch, they often end up using more energy than expected.
Used in conjunction with your current heating system, stand-alone infrared heaters can reduce your home heating bills by as much as 50 percent because you can turn down the thermostat for the whole house, then supplement as needed with infrared.
No combustion or open flames: Unlike many heating systems, infrared heaters don't burn fuel in the open air. This means they don't produce carbon monoxide or other harmful gases as a by-product.
The good news is that modern infrared heaters are very safe to use even when left unattended during the night, even while you are sleeping.
Say you have the 700w Ecostrad Accent iQ wall panel and you want to run it for 6 hours a day. Using a DIY calculation, you can work out the approximate running cost for a day's use, taking into account that it might only need to use a third of its full wattage: 0.7kW x 6 hours = 4.2kWh. 4.2kWh x 34p = £1.43.