To keep your fridge or freezer working properly, it's recommended to wait a few hours, at least 4-6 hours, before plugging it in after it's been moved. This allows the compressor oil, which lubricates the internal components, to settle back into place.
When you get a new fridge, it's generally recommended to wait about 2 to 4 hours before putting food inside. This allows the fridge to reach the optimal cooling temperature.
You should leave your fridge/fridge freezer to settle for at least 4 hours. Once 4 hours have passed, you can plug your appliance in. When doing so, make sure that the thermostat control is set to on. Before placing food into the appliance, allow your fridge some time to cool down to temperatures safe for food storage.
The reason you cannot turn on a new refrigerator right away, is the freon has to settle into the holding tank before the compressor forces it to move through the cooling system. You can risk damaging your compressor and other components if you do not let it settle for a day or so before turning it on.
A fridge with a standard compressor typically needs four hours before you plug it in. However, side-by-side or French door fridges that have dual evaporators or more zones may need 24 hours or more to settle. If you have a standard compressor fridge, you may wonder why you need to wait four hours before plugging it in.
Fridges and freezers are full of fluid that's used to cool the compartments. In transit, your appliance gets shaken around, so it's best to let everything settle and consider the duration needed to 'let it stand' before you plug it in.
When can I put food in my new fridge freezer? You can put food in your new fridge freezer after letting it settle for 4 hours if it was transported on its side or 1 hour if it was transported upright. After this amount of time you're absolutely fine and safe to put your food in your new fridge freezer.
How long should I wait after plugging in the refrigerator before putting food in? After plugging the refrigerator in, wait two to four hours and verify that the unit is cooling before putting food inside. Only add food to the freezer once the freezer temperature is below 0°F (-18°C).
Do Not Keep the Fridge Open Unnecessarily. This applies to both new and old fridges. Anyway, make sure that you are not keeping the fridge open for too long as warm air will enter the fridge. It will put extra pressure on the compressor since the component will need to give more effort to keep the fridge cool.
Fridge freezers repair and gas refilling on-site ,R400 for gas refill. 0646213749 call or WhatsApp Lesley for assistance.
After the Move
After you have moved the refrigerator to its new location, let it stand upright for 24 hours before plugging it in to allow all the fluids to settle. While you are waiting, place the shelves and drawers back in their original positions.
Once your fridge has been safely moved into the kitchen of your new home and is in the desired position, you should let it stand unplugged, in an upright position, for at least 4 hours to allow its compressor oil to settle.
When a refrigerator is first installed, allow 24 hours for it to stabilize to normal operating temperatures. Some cooling should be obvious in the freezer compartment within approximately one hour. The recommended initial temperature settings are 37 degrees F. in the fresh food compartment and 0 degrees F.
To keep your fridge or freezer working properly, it's recommended to wait a few hours, at least 4-6 hours, before plugging it in after it's been moved. This allows the compressor oil, which lubricates the internal components, to settle back into place.
Run two to four gallons of water through the new filter. This helps prevent your water dispenser from sputtering and clears impurities left over from manufacturing. Check for leaks around the filter.
Fridge temperature settings are generally numbered from 1 to 5, with 5 being the coldest. A fully stocked fridge may need to be set to a higher setting (around 3 or 4), whereas one with more space is best suited to temperature setting 2 or 3.
Our Top Pick: LG produces excellent refrigerators that perform well in our tests and receive high satisfaction ratings from consumers, including our survey participants. The Smart French Door Refrigerator with Dual Ice Maker stands out for its simple, user-friendly design and customizable features.
Once the unit is in the house you should: Leave the appliance to sit for 3 hours. Then plug it in and switch it on. It should then be left overnight to stabilize before putting any fresh food into it.
When a new refrigerator or freezer arrives in their home, most people can't wait to use it. But remember, it usually takes a unit between 6 and 12 hours to get to the proper temperature to safely store food or keep frozen items properly frozen.
After Transporting Your Refrigerator
If it was on its side for more than a day, leave it standing upright for 24 hours before running the refrigerator.
Mini Fridge – depending on the brand should not take more than 4 hours. Top-freezer fridge – depending on the brand will take 4 hours to 24 hours. French door fridge – depending on the brand will take 2 hours to 24 hours. Side-by-side fridge – depending on the brand will take 2 hours to 24 hours.
How soon will the water dispenser work after my fridge has been installed? Allow 24 hours for the refrigerator to cool down so that it can chill water properly. Also, the water dispenser needs to have the trapped air in the water line removed when it is first connected or every time the water filter is replaced.
Because you're going to be storing food in it, it's a good idea to give it a clean before you use it. You don't need to go overboard, just a quick wipe down with warm water and washing up liquid in each cavity. Make sure it's completely dry before putting the compartments back in.
It is advised to strap it standing upright to the side of a moving truck or other tall truck. If the refrigerator must be laid down, only do so on the left or right side. Once the product is uprighted after transporting it, make sure to wait at least 8 hours before restarting and operating it.
How Long Does It Take For a Refrigerator Compressor to Turn On? Typically, a standard time delay for refrigerator units is about 3 minutes.