Since the basin is deeper, this means that the bottom of a farmhouse sink will be a few inches lower than that of a traditional sink, which may be uncomfortable for a taller person.
One of the drawbacks of choosing a farmhouse sink is the installation process. Depending on how your kitchen is set up, you may have to alter the size and design of your countertops before the farmhouse sink installation. Farmhouse sinks are much deeper and wider than classic kitchen sinks.
Standard sizes & Dimensions – Small & Large
You may need to remove and replace countertops and remodel part of your kitchen to make the sink fit. Farmhouse sinks measure anywhere between 20 inches to 60 inches in length with an average height of 9-10 inches.
Farmhouse sinks are typically installed undermount and hence, are not compatible with laminate countertops. Look for an over-mount farmhouse sink that could be retrofitted with the cabinets and one that sits on top of the laminate countertop to eliminate the risk of water damage and warping.
Types of Farmhouse Sink Installation
A farmhouse sink installation can be done in 3 ways: Flush mount Installation: Where the sink sits in level to the countertop. Built-up Installation: Where the sink sits above the level of the countertop. Undermount Installation: Where the sink sits just below the countertop.
However, there are some key differences between the two types of sinks. Apron sinks are generally smaller than farmhouse sinks. They are available in various materials, including stainless steel, copper, and porcelain. Apron sinks are available in different styles, including single-bowl and double-bowl options.
Once the farmhouse under-mount sink is set, it's time to install the countertops above. For this step, professional help is recommended; you'll need to have precise measurements of the sink's dimensions, as the countertop might need to be adjusted and cut to fit in perfectly.
2. Farmhouse sinks (+26 percent) Porcelain, apron-front sinks are a splurge kitchen choice for sure—but apparently they pay you back big-time in the long run.
To make space for the extra-large sink, you'll need an 'apron-skirt' cabinet design. A farmhouse sink can't fit into the usual drop-in sink space and extends over the top quarter of the lower cabinet. This requires a full re-design of the cabinet and countertop where your farmhouse sink is installed.
No matter what you do, you will most likely need a special or custom cabinet to accommodate your new farmhouse or apron sink. This is because there are many styles of sink designs and how they need to be installed, typically requires a non-standard cabinet. The two most common types are Drop-in or Undermount.
Some sinks will be labeled 30" Kitchen sink, but the basin size is in fact 28". [This sink will fit!] While other sinks are named after their TRUE 30" basin size [This will NOT fit]. Which means you CAN fit some "thirty" inch sinks in a 30" kitchen sink base cabinet.
A good place to start when looking for the right size is with the most popular sizes for farmhouse sinks, small, medium, and large. Or the most common, either a 30″ or 33″ single bowl.
However, if you have a range of heights in your family, choosing an average is best. For example, technically speaking, the optimal vanity height for men is between 34 and 36 inches, and the optimal height for women is between 32 and 34 inches. The average number of 34, then, fits the bill for both men and women.
A typical 33 x 22-inch sink will fill a 36-inch base cabinet. If you're replacing a sink, make sure it fits the existing cutout. If the cabinet allows, you may be able to install a larger sink by expanding the cutout. A farmhouse sink may require a special cabinet size.
A porcelain farmhouse sink is a highly coveted kitchen feature—and for good reason. Farmhouse sinks are beautiful, spacious, and timeless, plus they add a distinctive look to any kitchen they're placed in.
Fireclay Sinks
These sinks are extremely popular these days and understandably so. Fireclay is made when clay and glaze are fused together at extremely high temperatures. This creates a highly durable material that is hard and resistant to chips and cracks.
Farmhouse-Style Sinks with Quartz Countertops
Cambria surfaces are durable—more durable than marble or granite countertops—so they're the perfect choice to handle the needs of a farmhouse sink installation.
When selecting, or designing, a base cabinet for your new farmhouse sink, it is important that the size of the base cabinet is correct. Your base cabinet should measure 3" longer in length than the sink you are installing. For example, if you have a base cabinet that measures 36" wide it will support a 33" sink.
'Can you install a farmhouse sink in an existing countertop? ' is a common question, one with the short answer of 'yes'. If you're looking for more specifics, we'll cover more details about everything from installation to costs to obstacles that might get in the way.
The primary benefit of a grid for new farmhouse sinks is to protect the brand new finish. Fresh copper and even hardened fireclay scratch more easily than you might realize. The metal bottom of pots, the metal tines of forks, and even the scrape of ceramic plate edges might cause a small flaw in the finish.
By its nature, a farmhouse sink involves more than a traditional unit, and the price difference is justified. These larger, deeper, more statement fixtures are often made with more expensive materials, such as fireclay or copper.
Apron sinks are deep cut, like farmhouse sinks. The only difference is, an apron sink's front is exposed. That's why they're also called "apron front" sinks. Modern kitchens use apron sinks as highlight pieces, and for good reason.
Even so, having said all that, there are plenty of reasons farmhouse sinks will never go out of style. As George pointed out, “they are extremely versatile” and as long as you're careful and “you keep on top of cleaning, your sink will remain in good quality for years to come.”
The most common countertop overhang is 1.5″. We wanted our sink to go about 1/2″ past the countertop, so we positioned our sink so that it would go 2″ past the cabinet face frame/front of the cabinet.