Can a farmhouse sink be flush with countertop?

Author: Freddy Harvey  |  Last update: Friday, September 8, 2023

Yes. A farmhouse sink can be installed undermount, top mount or a flush mount. Read the manufacturer's installation guide for instructions as it pertains to your sink model.

How far should a countertop overhang a farmhouse sink?

The most common countertop overhang is 1.5″. We wanted our sink to go about 1/2″ past the countertop, so we positioned our sink so that it would go 2″ past the cabinet face frame/front of the cabinet.

How far should a farmhouse sink protrude?

Most farmhouse sinks stick out past the face of the cabinets from . 75 of an inch to as many as 2 inches. Take a look at nearby drawers prior to ordering your sink to ensure that you will have clearance when the drawer is extended.

What is the difference between undermount and flush mount farmhouse sink?

Types of Farmhouse Sink Installation

Flush mount Installation: Where the sink sits in level to the countertop. Built-up Installation: Where the sink sits above the level of the countertop. Undermount Installation: Where the sink sits just below the countertop.

Can you put a 30 inch farmhouse sink in a 30 inch cabinet?

Some sinks will be labeled 30" Kitchen sink, but the basin size is in fact 28". [This sink will fit!] While other sinks are named after their TRUE 30" basin size [This will NOT fit]. Which means you CAN fit some "thirty" inch sinks in a 30" kitchen sink base cabinet.

How To Install a Farmhouse Sink | DIY Kitchen Remodel

Can you put a 30 inch farmhouse sink in a 36 inch cabinet?

The recommended size for a 36" base cabinet is a 33" farmhouse sink or smaller. It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.

What is the minimum cabinet size for a farmhouse sink?

When selecting, or designing, a base cabinet for your new farmhouse sink, it is important that the size of the base cabinet is correct. Your base cabinet should measure 3" longer in length than the sink you are installing. For example, if you have a base cabinet that measures 36" wide it will support a 33" sink.

Should an undermount sink be flush with the countertop?

A zero reveal is a counter that is flush with the sink's rim. This is the most stylish and practical reveal for an undermount sink. It's free from cracks and crevices where debris can get stuck, making your sink very easy to clean. And, it will add high-end appeal to your home.

What is the difference between a farmhouse sink and an apron sink?

Both types of sinks are huge, large, and quite deep. However, the apron sink's front area is exposed and visible- which is why they are called apron sinks. These are versatile and modern houses prefer apron sinks. But on the other side, farmhouse sinks look adjacent as well as covered by the kitchen cabinets.

What is the most popular farmhouse sink size?

A good place to start when looking for the right size is with the most popular sizes for farmhouse sinks, small, medium, and large. Or the most common, either a 30″ or 33″ single bowl.

What is the difference between reveal and overhang on a farmhouse sink?

OVERHANG - The countertop extends over the edge of the sink on all sides by approximately 1/8" - 1/4". Use caution with this installation to be sure that accessories such as colanders or cutting boards will fit properly. REVEAL - The countertop edge sits approximately 1/8" - 1/4" back from the edgeof the sink rim.

Do farmhouse sinks go before or after countertops?

Once the farmhouse under-mount sink is set, it's time to install the countertops above. For this step, professional help is recommended; you'll need to have precise measurements of the sink's dimensions, as the countertop might need to be adjusted and cut to fit in perfectly.

Does a farmhouse sink need to be installed before countertop?

If your new top is stone, a countertop installer is going to measure the cabinets and sink to create a custom top. Some installers are going to require a farmhouse sink to be installed before measuring.

Is 2 inch countertop overhang too much?

1. Purpose. If the counter is to be used for food prep, the standard measurement for the overhang is 1-1/2 inches. This is long enough to provide some protection for your cabinets without forming an obstruction.

What is an acceptable countertop overhang?

Standard countertop overhang is 1 ½ inches.

Keep in mind that this is 1 ½ inches over the front edge of the base cabinet. While some countertops may have different overhang measurements, this is the number that is seen as standard for homes. While 1 ½ inches is the most common, it's far from mandatory.

What is countertop overhang code?

The maximum overhang is no more than 1/3 of the total dimension of the countertop – not to exceed 15”. Overhang greater than 15” requires corbels or flush mounted steel supports. Supports must be designed to bear the weight of the countertop and be mounted to studs or equivalent load bearing structure.

What are the drawbacks of a farmhouse sink?

One of the drawbacks of choosing a farmhouse sink is the installation process. Depending on how your kitchen is set up, you may have to alter the size and design of your countertops before the farmhouse sink installation. Farmhouse sinks are much deeper and wider than classic kitchen sinks.

Do farmhouse sinks increase home value?

2. Farmhouse sinks (+26 percent) Porcelain, apron-front sinks are a splurge kitchen choice for sure—but apparently they pay you back big-time in the long run.

Can you have a garbage disposal with a farmhouse sink?

Yes, absolutely. A garbage disposer can be installed in a farmhouse sink be it a single bowl or a double bowl. In most cases, for standard thickness farmhouse sinks, you can use the stainless steel drain flange that comes with the garbage disposer.

What is a flush reveal on a kitchen sink?

Zero Reveal

Also known as a flush mount, this is where the edges of the countertop and sink are perfectly aligned. Since a perfectly flush mounted sink requires very high precision in fabricating and installation, a zero reveal will come with an added cost.

What is a negative reveal sink?

A negative sink reveal is when the countertop extends over the edge of the sink on all side. The countertop hangs over about 1/8th of an inch. This creates a more streamlined look as the sink edge is completely covered. It also is very easy for wiping crumbs into the sink.

Should countertops be flush with cabinets?

Usually, the conventional overhang of a countertop should be placed at 1 to 1 ½ inches above the cabinet. At the same time, the bared and exposed ends of a countertop should usually have a ½ inch overhang. The edges that suffice to a wall should not have any overhang to retain the fit flush to the wall.

Do farmhouse sinks require a special cabinet?

No matter what you do, you will most likely need a special or custom cabinet to accommodate your new farmhouse or apron sink. This is because there are many styles of sink designs and how they need to be installed, typically requires a non-standard cabinet. The two most common types are Drop-in or Undermount.

Can you use a regular cabinet for a farmhouse sink?

To make space for the extra-large sink, you'll need an 'apron-skirt' cabinet design. A farmhouse sink can't fit into the usual drop-in sink space and extends over the top quarter of the lower cabinet. This requires a full re-design of the cabinet and countertop where your farmhouse sink is installed.

Can you modify a cabinet for a farmhouse sink?

Yes and no, there is a specific cabinet for farmhouse sinks. However, a standard sink base cabinet can be modified to fit a farmhouse sink. If you are using a standard sink base cabinet, the top half of the cabinet will have to be cut out, and the doors will have to be modified.

Previous article
Why does my soil keep getting fungus?
Next article
What plants need to be covered in winter?