If the interior and exterior units have different fuses protecting them, warm air blowing from your vents could indicate that the exterior fuse has blown. This means your condenser isn't getting any power and can no longer cool your air until the problem is resolved and a new fuse is installed.
Air conditioners can stop working if there is a blown fuse. Replacing that fuse can fix the problem, though it's important to have a certified car AC service technician check your electrical system.
There are a number of reasons why your air conditioner might be running but not cooling. It could be an issue with the thermostat, the compressor, or the evaporator coils. Or, it could simply be clogged with dust and debris, which is preventing it from working properly.
First, check your filters and coils for dirt and debris that may be impeding airflow. Once you've cleaned the filters and coils, run the air conditioner with just the fan so that the ice accumulation can melt off. If the AC still doesn't blow cold air, it could be that refrigerant levels are too low.
The most common causes of broken air conditioning are leaks or compressor issues. If your air is blowing cool but not cold, the problem could be a clogged filter, cooling fan problem, radiator trouble, or it could simply be that you need to recharge your AC.
Check these issues when the unit won't kick on: Check the thermostat and adjust the settings if it isn't set to Cool and an appropriate temperature setting to call for cooling. Examine the house circuit breakers for the AC unit and reset any tripped breakers. Check the air filter and replace the filter if it's dirty.
If you have fuses, you can only reset the AC by taking the fuse out. After the 30 minutes lapses, reinstall the fuse back in position if it's still in good condition, but replace a worn-out fuse with a new one. Now turn the AC back on, confirm if the thermostat is set to cool, and observe how the unit functions.
Wear and Tear on the Fuse
The lifespan of a fuse can be up to 20 years. AC fuses are usually what is known as 'slo-blow' or 'time delay' fuses. This means that they are at work every time you turn the machine on and off and eventually, will simply wear out due to the strain of the operation.
If you think your air conditioner has blown a fuse, the first sign you'll notice is that the outside AC unit is inoperable. The best way to check for a blown fuse is by using a voltmeter. Be warned — you are working with live electricity and should use extreme caution when troubleshooting your system.
Check the thermostat
You should check if it's been set to the correct temperature and also make sure it's set to “cool”. If the AC settings are not right, it won't turn on. You can also check if the batteries in the thermostat are fresh and replace them if needed.
For AC capacitor replacement, anticipate spending between $150 and $400, depending on the capacitor's type and accessibility. A bad AC capacitor is a fairly minor repair, and most HVAC technicians will recommend a repair rather than replacing the unit when the capacitor is the problem.
If your AC is running but not cooling, it could be due to a dirty air filter, incorrect thermostat settings, a malfunctioning thermostat, a refrigerant leak, dirty condenser coils, blocked vents or ducts, a faulty compressor, frozen evaporator coils, or electrical issues.
In AC systems, the air conditioner reset button is on the outside unit's lower edge, typically close to the ground. Some models have the reset button located behind the service panel, which may require tools to remove. Reset buttons are usually red or yellow with a clear “reset” label.
If your central AC is not blowing cold air, the refrigerant may be the problem. The unit could be running low and need additional refrigerant added. The most likely cause of this is a leak. A leak not only keeps the AC unit from cooling properly, but also it can cause other issues within the home.
When you notice that your air conditioner isn't cooling, your first action should be to turn it off. This might seem counterintuitive—after all, you want your home to be cool. However, continuing to run an AC that isn't effectively cooling can cause further damage to the system.
This is because the compressor is not circulating refrigerant through the system, extracting warm air. Your trusted HVAC technician is able to assess the compressor and inform you if yours has been damaged by the power outage. If the compressor has failed, a compressor replacement is needed to restore system function.
Checking basic thermostat settings, power supply components, and air filter conditions are essential to troubleshoot why an AC unit isn't turning on. More advanced issues requiring professional attention include faulty wiring, a malfunctioning outdoor unit, a bad capacitor, or incorrect thermostat calibration.
Check your filters and replace them if necessary.
If your filter is dirty or clogged, it may be the reason why your AC isn't blowing cold air. Dirty filters can cause a restriction in the airflow. To check if this is the case, remove the filter and inspect it for dirt.
Your A/C system may have lost its charge of refrigerant. This is probably the most common cause of a no cooling problem. Another possible cause of no cooling may be that your A/C compressor is not engaging when you turn on the A/C.
Cabin air filters can capture dust, bugs, leaves, and other various types of debris. A dirty air filter can certainly impede your air conditioner's ability to cool and after time could cause unnecessary strain on the entire system. Another common potential reason is that your compressor has failed.