White vinegar is good for cleaning pavers, though it's also acidic enough to erode the stones' surface. Diluted vinegar can be used safely to clean paving stones, though it should be used sparingly and infrequently to protect your paving from damage.
While it may look like it's cleaning, vinegar will actually degrade the cement binding and slowly strip away the protective sealant from concrete and stone tiles. You see it suggested all over the web, and although vinegar can be a useful household cleaner, it should not be used to clean your patio.
To clean your pavers with vinegar, mix equal parts of water and vinegar in a bucket, let it sit on the pavers for an hour so that the vinegar has time to work, then scrub the surface with a brush or a sponge. Make sure you choose white vinegar for household cleaning, as other types of vinegar can stain.
Usually, hosing them down once a month is sufficient. Use soap and water, if the pavers are still dirty after sweeping and water hosing, make a solution of soap and water. You can use dish soap, laundry detergent, or any type of general-purpose cleaner. Never use bleach on your pavers, as it can damage the surface.
Vinegar does not dissolve concrete itself but can degrade the cement that binds concrete together. As a weak, dilute acid, vinegar will cause only minor damage to concrete but can take the shine off polished surfaces. It can, however, be used to remove small amounts of cement from tools.
Despite the signal word danger on most such labels, gardeners may instead just see vinegar and be careless. Sobering details: In concentrations over 11%, acetic acid can burn skin and cause eye damage, and concentrations of 20% and above are corrosive to tin, aluminum, iron, and concrete and can even cause blindness.
Vinegar and Baking Soda
Simply fill a spray bottle with equal parts water and vinegar (or water and baking soda), and add a little bit of liquid dish detergent. Spray the mixture on your concrete surface and let it sit for about 30 minutes. Then scrub and rinse your concrete.
To clean paver slabs, you can use a detergent, such as Dawn, or a vinegar-water solution that is gentle enough to effectively clean without causing damage to your concrete pavers.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
Dry brushing with or without application of clean sharp sand. OR High pressure water jetting with or without detergent. OR Apply fungicides. Use ordinary bleach or calcium chloride followed by sodium hypochlorite dissolved in water (1kg in 5 litres) then scrub with stiff brush.
Leave the white vinegar for 1 hour or so to let the vinegar work its way into the paver slabs. Spray the surface with soap and water, then scrub off. Rinse with warm water, then let dry. You may repeat the process if there are stains left.
Remember that vinegar can only be used for a short time on finished surfaces. Not only does it kill algae, but it eats away at polished cement if you leave it on the cement for too long. Vinegar can be used for longer periods on unfinished cement to remove algae, and it serves as an excellent cleaning agent.
We found several “recipes” for cleaning solutions that can be used on unsealed cement garage floors. Here are three of the most common: Recipe #1 – Mix 2 tsp. dish soap, 1 cup white vinegar and 1 gallon warm water in a bucket.
Wash patio slabs with white vinegar
This eco-friendly solution is made up of equal parts vinegar and water, which is then left to soak into the patio to correct any discolouration and also remove tough marks. You should first move all plants and furniture out of the way, then sweep the area to remove any moss.
A mix of water and vinegar is a great combination to remove stubborn dirt and stains. If you want even better results, use this mix with a cleaner solution specific made for pavers or soap and water. Just remember to plan your cleaning on sunny days because if it rains, you might need to redo all the work.
Can you power wash pavers? Power washing (also known as pressure washing) is also a very effective method by which you can remove dust deposits and various stains from your pavers. Just make sure that the water jet is not directed directly at the joints between the paving stones.
Whilst vinegar will not directly dissolve concrete itself, but it will degrade the cement that binds your concrete slabs or flags together. Extended exposure to vinegar will also cause any polish or sealant on your pavers to erode over time, leading to bleaching, stains and weathering.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue.
Depending on the material of the paver (non-coloured concrete is safe), CLR may be suitable. Always spot test in an inconspicuous area first. Make sure the pavers are not coloured, stamped, sealed or coated.
Bleach. If your concrete is dull and sprouting weeds or mold, bleach is your best option for cleaning and brightening concrete. Mix a cup of bleach into a 5-gallon bucket of warm water, then spray or pour over concrete. Rinse thoroughly with water.
But common pantry essentials that are often used for cleaning — like baking soda and vinegar — shouldn't be mixed either. Unlike the bleach-ammonia mixture, combining soda and vinegar won't hurt anyone — but don't expect the mixture to do a good job cleaning, either.
Use a detergent such as Dawn or Ajax dishwashing liquid mixed with water to brighten a concrete patio that hasn't been cleaned in a while. Use a detergent such as Dawn or Ajax dishwashing liquid mixed with water to brighten a concrete patio that hasn't been cleaned in a while.