The short answer is—yes, you can paint your bathroom with Bauwerk limewash. Our paint is not just suitable for high-humidity environments, it thrives in these demanding conditions. Limewash paint offers several benefits compared to other finishing products.
One of the biggest cons of limewash is that it can erode over time, especially if exposed to harsh weather conditions. This means it may require more frequent maintenance than other paint or finishes. You may need to reapply external limewash every two to seven years to keep your walls looking their best.
Is limewash waterproof? While not naturally completely waterproof, a lime sealant can be applied over a limewash finish for additional water resistance and to make the lime walls easily wipable.
Because limewash is nearly 10x darker when it is wet, it's important to test the color and let it completely dry. The color also changes depending on the number of coats applied and porosity of the surface being painted. That said, Romabio's Classico Limewash is a one coat finish that looks breathtaking!
The Perfect Paint for High Humidity Environments!
Bauwerk limewash is a naturally anti-bacterial and will resist mould. Limewash can be used on all wall and ceiling areas, except for the inside area of a shower or the immediate area adjacent to a bath.
There are also other natural benefits to limewash paint: It's breathable, nontoxic, and eco-friendly, and the high pH level means that it's bacteria- and mold-resistant. Also, because limewash paint contains no VOCs (volatile organic compounds), its application is practically odorless.
The alkalinity deters wood-boring beetles and helps sterilise walls. Furthermore, limewash is inexpensive and solvent-free. The disadvantages are that much care is needed for the best results, matching coloured limewash batches is difficult, and limewashing is less successful in very fast-drying conditions.
Spread Limewash thinly using horizontal, vertical, and diagonal strokes before working the paint in vigorously using a circular motion. If Limewash is applied too thickly this application may result in cracking or crazing.
Remember that limewash will weather and patina over time, creating a beautiful aged look. So while it may not wash off in the rain, it will likely wear away gradually over the years. A touch-up or a new coat every three to seven years is recommended.
Unlike artificial paints, Limewash will not need to be removed and only retouched every five to seven years. Most Suitable for Masonry Surfaces: Old buildings with masonry surfaces like stone, concrete, and brick are perfect fits for lime wash coating.
And though limewash is bacteria- and mold-resistant, thanks to the high pH level of the lime, Helene van Os, brand manager for Pure and Original, says, "If you're going to use limewash paint in a humid or high-trafficked area, make sure you protect it with a sealer, as lime is porous and more vulnerable to dirt and ...
Limewash is a very durable finish and can last for many years with proper care. It is best to reapply every three to five years to maintain the original look. To clean limewash, simply use a soft brush and mild soap. You can also pressure wash it if necessary.
Finished limewash will gradually erode, which can produce a very attractive weathered look, but to retain the original opaque coverage, reapply the limewash every five to seven years. There is no need to remove existing limewash in order to apply renewal coats.
As it dries, the applied limewash gets lighter and much more opaque. The slower limewash cures, the more durable the result will be.
Limewash brick is a great choice for a vintage home look on new bricks. On the other hand, whitewashing bricks is recommended for those searching for a solution that is more permanent. Because whitewashing is mixed with paint, it can be used on previously painted brick.
Romabio Classico Limewash is a low maintenance product, mainly because it is naturally mold resistant. However, as we all know, algae can grow on anything. So as far as cleaning it, you need to be careful when using chemicals or a high powered pressure washer. No need to use bleach.
The putty is aged and then thinned with water and colored with natural pigments. Limewash creates surfaces that are mottled and matte with a chalky texture something like suede. It lends a depth and luminosity to flat walls. Above: Limewash creates a textured, shadowy effect.
We recommend 24 hours between coats. It is very important to rewet the previous coat before applying the next coat. At least 4 coats will be needed to cover new work.
The best way to clean lime plaster and limewash is to keep it from getting dirty in the first place. Stains, marks and dirt cannot be easily washed off, rather these foreign substances can be gently wiped with a dry cloth and then apply limewash over them.
To this basic limewash may be added binders such as raw linseed oil, which will help it to adhere by making it moisture-droplet resistant while remaining vapour permeable. In the event that tallow is to be added this can only be effectively included during the slaking process.
Limewash pigments come in a variety of organic colors. The colors we use most often are earthy neutrals like white, taupe, grey and charcoal. Of course, when looking to make a statement, colors like emerald, cobalt, black, terracotta or blush are perfect choice.
It penetrates the surface of your wall, creating a mottled matte appearance with variegated colors (resembling the look of a plastered wall). This DIY version has the same effect, but involves thinning paint by mixing it with water, then applying it to the wall in circular motions using a cloth instead of a brush.
Limewash is a natural bug repellent.
Its powerful active ingredient, calcium hydroxide, has been proven highly effective at eradicating mosquitoes and other pests from timber. It also acts as a preventive measure, discouraging bug infestations by creating an alkaline surface that deters them from taking hold.