Yes, you can paint over Thompson’s Water Seal, but only if the sealer has fully weathered (usually 6 to 12 months) and you use an oil-based primer. Because Thompson's contains wax and silicone designed to repel water, fresh applications will prevent paint from adhering.
Allow 45 days drying time before applying latex paint over Thompson's® WaterSeal® Clear Multi-Surface Waterproofer. Allow a minimum of 3 days drying time before applying oil based paint over Thompson's® WaterSeal® Clear Multi-Surface Waterproofer. Length of protection will vary depending on environment.
What type of paint works best on pressure treated wood? High-quality exterior latex paint (water-based) is ideal as it adheres better to the chemical treatments and allows remaining moisture to escape. Avoid oil-based paints which can trap moisture and cause issues despite the pressure treatment.
When it comes to painting prep, sealing should almost always come first. Applying caulk or sealant before painting helps fill gaps, smooth transitions, and block out moisture, all of which lead to a cleaner finish and better adhesion.
No, you shouldn't. Paint alone won't stop water stains from showing through, and moisture issues can cause paint to peel or bubble. Before painting, you must address the underlying cause and seal the stain with the right primer.
If you live in or happen to be visiting a place with wet weather, you may have been wondering if it is possible to waterproof over paint. The answer is yes, as long as the paint you are using is designed to be waterproof.
Black, blue, and green: Darker shades like navy blue and hunter green feature intense pigments that can resist coverage, particularly by lighter colors. (If you've ever tried adding white paint over dark paint, you know how many coats you need for a solid finish!)
October has many warm dry sunny days and although it does record the highest( not by much) average monthly rainfall, the rain is usually followed by windy autumn weather to dry things out quickly. It is therefore alright to paint outside in October. Just beware the cold nights.
The main difference between an undercoat, primer, and sealer is that primers are applied to new surfaces, while sealers are used in place of a primer or applied before the primer, while undercoats are used on a surface that has already been painted.
Key Points
That said, it should never be used in marine applications, countertops, or woodworking projects that come into direct contact with food, like bowls or cutting boards.
Resincoat Non-Slip Decking Paint is the the ultimate solution for creating a safe, attractive, and long-lasting decking surface. This premium two-part UVR anti-slip coating is engineered for exceptional durability, making it far superior to single pack coatings.
Pressure-treated wood is notorious for not holding coatings.
The primer creates a permanent adhesion bridge between the treated wood and the topcoat, solving the adhesion problem that defeats other products. Important: New pressure-treated lumber should be allowed to age for at least one full year before coating.
For best results ensure the surface is as dry as possible. Apply 2 coats using brush, roller and sprayer. The second coat should be applied when the first coat has soaked in to the surface. For best results do not leave the first coat to dry for more than 1 hour before applying the second coat.
Primer is used to create a base for the paint, improve adhesion, and prevent stains and bleeding. Sealer, on the other hand, is used to seal the surface and prevent the topcoat from being absorbed or bleeding through. Undercoat is used to cover imperfections and create a smooth surface for the topcoat to adhere to.
Painting pressure-treated wood too soon can result in peeling, blistering, or flaking over time. And, trapped moisture beneath the paint can cause the wood to deteriorate from the inside. Wait until the wood has reached a moisture level of 15% or less for the best results.
It's completely fine, I seal almost every layer of paint I add to mine. If you're hand brushing, just make sure it's completely dry before you move on to the next layer of paint.
KILZ 3® PREMIUM primer is a superior quality, fast drying, low odor, very low VOC, water-based primer-sealer-stainblocker.
So unpainted primer can be damaged by water, UV rays, and other environmental factors. This could eventually cause it to crack, peel, and possibly harm the surface underneath. Plus, topcoats also offer a protective layer against scratches, stains, and impacts.
Since 2000, Rhino Shield has grown to become nationally recognized as a leader in premium exterior coatings and paint products. Our innovative formula protects your property against the elements while giving it a beautiful finish, all backed by a 25-year guarantee. Rhino Shield is superior to traditional latex paint.
Most latex paints require temperatures between 50°F and 85°F (10°C and 29°C) for proper application and curing. Oil-based paints generally have a wider range, sometimes down to 40°F (4°C).
After two hours, a light rain likely won't impact the paint job. Oil paint: Oil paint is thicker than latex paint and takes longer to dry. Your exterior oil paint will need at least 24 hours to dry completely before getting rained on.
There are three main types of “impossible” colors: Forbidden colors. These are colors our eyes simply cannot process because of the antagonistic way our cones work, for instance “red-green” or “yellow-blue.”
The Designer-Favorite Color of 2026
“Clients are craving warmth, including taupes, sands, mushrooms, and creamy whites that feel cozy and timeless. Gray, once sleek and modern, now reads cold and flat; those warm neutrals wrap a space in calm and connection.”
Top 10 Timeless Paint Colors for Your Home