Getting in between the tiles is hard but OxiClean™ can make keeping your grout sparkling white easy. Always refer to packaging for directions. MIX Fill to line 4 per gallon of water. For some surfaces, like grout, a more concentrated solution/paste may be needed.
Remember the tip on avoiding bleach, ammonia, and other harsh chemicals to clean grout. It would be best if you also avoided vigorous scrubbing. A rough brush and too much elbow grease will remove the dirt, but it could also remove the grout. Another way to prevent grout damage is to use a squeegee on shower walls.
Next, ensure you're NOT scrubbing any of the tiled areas with bleach or ammonia products. Chemical cleaners, such as, Tilex, Soft Scrub, Scrubbing Bubbles, or ammonia products will nearly always result in your tile surfaces' grout becoming very discolored.
Use a commercial grout cleaner or a homemade solution of equal parts white vinegar and water in a spray bottle. Spray the grout lines generously with the cleaner. Scrub with a Brush: Scrub the grout lines with an old toothbrush or a grout brush. Use a back-and-forth motion to loosen dirt and stains.
There are commercial grout cleaning products that use hydrochloric acid (HCL) in them. Muratec acid is a 10-12% mix of HCL acid in water. Here is an example, of a product that we used to do a large kitchen dinning room area with perfect success.
Add three to four parts of distilled white vinegar to one part of cool water in a spray bottle. Mix but do not shake. When using vinegar to remove grout haze, it's usually necessary to use a non-scratching scrubbing pad to boost the removal process.
Yes, hydrogen peroxide is a natural neutral cleaner that is safe to use on grout. Hydrogen peroxide and baking soda produce oxygenated bleach, which is highly effective for cleaning grout.
Grout is porous and usually sealed to resist stains. However, acid can degrade these silicone-based sealants, causing them to break down and wash away. Contrary to popular belief, this can happen with just one application of vinegar. Once the sealant is removed, dirt can penetrate the grout, leading to discoloration.
Here's a few DIY grout cleaners you can try: Make a spreadable paste with 3/4 cup baking soda with 1/4 cup hydrogen peroxide and 1 tablespoon of mild dish soap. Add more baking soda or peroxide if the mixture is too runny or thick.
Acidic Cleaners
Cleaners that have a high chemical pH or are acidic will begin to eat away at your grout and make it more fragile and porous. Stay away from cleaners that contain vinegar and citrus. This will eat away at the top layer of the grout and cause the need for replacing grout lines sooner.
If you're a die-hard DIYer, using Dawn dish soap alone can be a safer option for mild cleaning. Dilute a small amount of Dawn in warm water, scrub the grout with a soft brush, and rinse thoroughly. However, this method is less effective for tackling stubborn stains or deep-seated grime.
Soap residue and body oils also create a food source that encourages mould growth. Once mould develops in porous grout joints, no amount of scrubbing can resolve it. Using chemicals to get rid of the mould won't help either, they will just eat away at the grout which can cause more damage.
Baking soda is safe for grout and can be an effective cleaner especially in combination with hydrogen peroxide and dishwashing liquid.
Professionals often use steam to loosen the dirt and other particles trapped in the grout without needing to scrub manually. While every steam cleaning machine is different, you'll follow this basic process to clean grout lines: Use a steam cleaner with a small nylon brush attachment.
Rather than using other cleaners that rely on hard scrubbing and manual labor, use the foam cleaners in OxiClean™ Foam-Tastic™ Spray to clean tiles and grout lines.
It works on the tile and the grout, effectively cleaning everything from hard water stains to mold and mildew stains to soap scum.
To make your own grout cleaner, mix 1 tablespoon liquid dish soap, ½ cup baking soda, and ¼ cup hydrogen peroxide together in a squeeze bottle. Allow the mixture to stand for 7 to 10 minutes, then apply to wall tiles, floor tiles, and countertops wherever the grout is dirty.
Yep, you read it right – toothpaste can help you clean the grouts spotless, and it is the perfect pick for those looking for something simpler yet effective. Try using just plain old toothpaste and apply a dollop to a damp cloth. Next, pat down the grout gently and let it sit like that for a few hours.
One DIY cleaner that is both natural and potent involves combining ¼ cup of white vinegar, one tablespoon of liquid dish soap, ¼ cup of baking soda, and two gallons of hot water. For a pleasant fragrance, add a few drops of essential oil to the mixture.
Once you've activated the micro-scrubbers inside, your Magic Eraser is good to go. Start by swiping it firmly across the desired surface. In just a few swipes, you should start to see grout messes and buildup begin to disappear!
As go-to grout and tile care specialists, The Grout Medic truly wants what is best for your tile. Waiting too long to wipe grout could result in unsightly grout haze. Don't wait too long to wipe off grout!