How do you unclog a toilet with too much water?

Author: Dr. Flavio Roberts MD  |  Last update: Wednesday, September 3, 2025

Close the supply line valve to shut the water off if it isn't stopping. Run a plunger under hot water for 2 minutes. Plunge the toilet 15-20 times to clear the clog. If the plunger doesn't clear the blockage, use a drain auger to snake the pipe.

How to unblock a toilet that's full of water?

Unclog Your Toilet with Baking Soda and Vinegar

Then try pouring 1 cup of baking soda and 2 cups of vinegar into the toilet. The mixture will bubble excessively, which is why it's important to first remove the excess water. Let the bubbles sit for at least 20 minutes before you try to flush.

How do you unclog a toilet when the water level is high?

Align the rubber cup of a toilet plunger over the centre of the hole of the toilet bowl. Apply downward pressure slowly at first, gradually increasing the speed and intensity. If a clog has caused the overflow, a plunger will dislodge the mass and allow water to escape through the plumbing.

What to do if clogged toilet water won't go down?

We recommend you add a cup of baking soda to your blocked toilet and wait for some minutes. Next, pour two cups of vinegar slowly into the toilet. Vinegar and baking soda will typically react to form bubbles, so ensure you pour carefully and slowly to prevent the toilet water from overflowing or splashing.

When I flush my toilet, it fills up with water then slowly drains.?

Check your water levels

Low water levels in your tank are common causes of toilets filling up with water when flushed. They can also cause slow-draining toilets. You can manually top up your tank with water to help the flush. Then, check the flush tube for cracks and bends that lead to leaks.

How To Fix A Slow Draining Toilet Without A Plunger

What to do if the toilet water is high?

What to Do if Your Toilet Overflows
  1. Step 1: Contain the Water. You need to contain the water and stop it from flowing across the bathroom floor. ...
  2. Step 2: Shut Off the Water. ...
  3. Step 3: Clean Up the Mess. ...
  4. Step 4: Plunge the Toilet. ...
  5. Step 5: Place Towels Around the Toilet. ...
  6. Step 6: Turn the Water Back On. ...
  7. Step 7: Flush the Toilet.

What is the strongest thing to unclog a toilet?

One of the strongest substances for unclogging a toilet is a commercial drain cleaner specifically designed for toilet clogs. These cleaners typically contain powerful chemicals that dissolve organic matter and stubborn blockages.

Will clogged toilet water eventually go down?

Substances like toilet paper and fecal matter will eventually dissolve within the toilet drain and clear the clog organically. However, blockages made from insoluble materials won't resolve on their own and typically require you to fix the clog manually or contact a professional before they worsen.

How to force a toilet to flush?

3 Ways to Manually Flush a Toilet
  1. Throw a Bucket of Water into the Toilet Bowl. One of the simplest ways to manually flush your toilet is pouring a bucket of water into the toilet bowl. ...
  2. Pour Water Into the Toilet Tank. ...
  3. Pull the Rubber Flapper in the Toilet Tank.

What will dissolve a blocked toilet?

Baking Soda And Vinegar

Instead of creating a volcano, this vinegar and baking soda mixture will work together to loosen up the clog in almost no time. We suggest wearing rubber gloves for this. As this method creates a pretty chemical reaction, it is recommended that you use it in a toilet bowl that is not too full.

Why won't my toilet unclog with a plunger?

You need water, not air, pressure to loosen the clog. If your toilet lacks water, pour in enough water till the plunger is covered. Use a gentle plunge initially since a hard one will force air back around the seal, blowing water all over you and your bathroom floor.

What is the fastest way to unclog a toilet?

Pour about half a cup of baking soda into your clogged toilet and wait for a few minutes. Then, carefully pour in two cups of vinegar. The reaction between the base (baking soda) and the acid (vinegar) should be apparent very quickly.

What is the best chemical to unblock a toilet?

Unblocking the toilet using soda crystals and vinegar

The combination of soda crystals and white vinegar is a great way to dissolve blockages, and best of all, you've probably already got them in your cupboards.

What not to do when unclogging a toilet?

3 Ways NOT to Unclog Your Toilet (Unless You Want to Damage It)
  1. Using chemical drain cleaners (like Drano) Most chemical drain cleaners clear your drain by breaking down the clog with a chemical reaction. ...
  2. Plunging down too hard. ...
  3. Using the wrong plumber's snake.

How to fix a blocked toilet full of water?

Try To Soften the Clog

Put a soap dish, shampoo, or slivers of bar soap in the bowl. Then heat a gallon of water to the temperature of hot tea, pour into the bowl, and wait about 20 minutes. Baking Soda and Vinegar – Try a safe chemical reaction. Measure one cup of baking soda and pour it into the toilet bowl.

Will letting a clogged toilet sit unclog it?

Leaving a clogged toilet overnight may seem like a harmless way to put off an unpleasant task, but it can lead to more significant issues. The most obvious problem is that the clog might not magically disappear. Instead, it can worsen as the blockage hardens or settles deeper into the pipes.

Is it okay to leave a clogged toilet overnight?

This makes it potentially harmful to your health. That also means you need to sanitize the area around your toilet. So, is it okay to leave a toilet clogged overnight? No, because you risk the clog escalating into a worse problem.

How to unclog a toilet with a plunger when the water is high?

If the water is too high to use your plunger, then you're going to have to get some of the water out. Use a cup or a small bowl to carefully remove some of the water and pour it down the sink or bath drain. Once it's low enough, plunge away!

What is the best drain cleaner for standing water?

Drano Max Gel Liquid Clog Remover

The best drain cleaner overall. A thick gel that descends through standing water to the source of the clog and starts to work melting soap scum, grease, and other gunky obstructions, is safe for plumbing and septic systems.

How to unclog a toilet when it's overflowing?

Work at a fairly rapid pace to keep water flowing around the clog. Push the plunger down hard to send water into the pipes, then pull it back with the same force to draw the water back out. Avoid lifting the plunger off of the exit hole after each thrust.

What happens if you put too much water in a toilet?

If bowl appears to be full but continues to fill, the valve may be overfilling the bowl causing excess water to siphon down the trap way. Adjust the amount of water going into the bowl by using these steps: Fill the bowl with a gallon of water. Wait 1 minute until the bowl water level recedes down and stops.

What to do when water backs up in toilet?

Start with a Plunger

While a toilet plunger may not be a very high-tech solution, it's often the most effective and best way to unclog a toilet. In fact, most clogged toilets can usually be cleared with a simple plunger. Just make sure that you use the right kind of plunger as there are sink plungers as well.

Previous article
Will my fire alarm go off if I smoke inside?
Next article
How do you know if your car AC needs recharged?