Hydrogen peroxide won't damage normal tiles or colored grout. However, you shouldn't use it on polished marble. Cleaning with hydrogen peroxide and baking soda is a great way to remove stubborn stains from your grout.
The most common and effective homemade grout cleaner is a mixture of baking soda, hydrogen peroxide, and dish soap. Cream or tartar and lemon juice is the best all-natural solution for whitening. Avoid using highly-acidic solutions like vinegar because they can corrode grout.
To clean your grout, combine one-part 3% hydrogen peroxide and one-part water into a spray bottle. Spray your grout generously and let the solution sit for about 1 hour, to allow time to work. Rinse the area with water and wipe clean with a microfibre cloth.
Hydrogen peroxide is our transition into gradual cleaning, because we now have daily cleaners that leave no residue and gradually deep clean the grout lines. These cleaning chemicals utilize hydrogen peroxide in their formulations to boost cleaning performance without damage to the grout.
Mix together 1/2 cup of baking soda, 1/4 cup of hydrogen peroxide, and 1 tsp dish soap. Apply cleaning mixture onto the grout, wait 5-10 minutes, scrub, sweep up the excess baking soda, and rinse.
Avoid Vinegar and Baking Soda
Vinegar and other acids are also a bad idea for stone tile because the acid can etch the stone. Another widely praised household cleaner, baking soda, is alkaline (not acid), but it is not very effective as a grout cleaner.
Add Hydrogen Peroxide and Dish Soap
A good ratio is ½ cup baking soda, ¼ cup hydrogen peroxide and one teaspoon dish soap. When you apply your mix, let it sit on the grout for about 10 minutes. This allows the mixture some time to loosen the dirt. Then gently scrub and wipe the surface clean with a damp cloth.
Is hydrogen peroxide safe for grout? Yes, hydrogen peroxide is a natural neutral cleaner that is safe to use on grout.
One way to clean grout without scrubbing is by mixing hydrogen peroxide and baking soda. Add 1/2 cup of baking soda to 1/4 cup hydrogen peroxide and mix into a paste. Follow with a teaspoon of dish soap. Apply the mixture to your floor grout and let it sit for 5–10 minutes.
Hydrogen peroxide oxidizes compounds that are common in organic life, which disinfects surfaces. It dissolves proteins by breaking apart and releasing water and oxygen-free radicals. When the water and oxygen are released, it creates a fizzy foam.
Hydrogen peroxide won't damage normal tiles or colored grout. However, you shouldn't use it on polished marble. Cleaning with hydrogen peroxide and baking soda is a great way to remove stubborn stains from your grout.
Grout that hasn't been sealed, needs to be resealed, or is in poor shape should not be cleaned with vinegar. The vinegar penetrates into the pores of the grout, further weakening the material. Over time, vinegar will deteriorate the condition of the grout by etching or wearing it away.
The association warns against acid-based cleaners, which can eat into grout, and cleaners with oil or wax, such as Murphy Oil Soap and Pine-Sol, because they can leave a sticky residue on grout. If the alkaline cleaners don't work, the association recommends trying an enzyme cleaner labeled for use on tile.
Don't mix hydrogen peroxide and vinegar together in the same mixture. This can create peracetic acid, which may be toxic and can irritate your throat and lungs, eyes and skin. You can, however, alternate spraying hydrogen peroxide and vinegar on a surface. Just make sure to wipe the surface between sprays.
Getting in between the tiles is hard but OxiClean™ can make keeping your grout sparkling white easy. It's a great bathroom cleaner and grout cleanser.
Cleaning Tile Grout
Start with water and a stiff brush, and if that doesn't do the trick, try an oxygen cleaner or a mix of baking soda and vinegar followed by brushing. Deep stains may call for replacing the grout altogether.