For human-made colored concrete
Bleach: This alkaline solution may be effective for other household uses, but it can discolor concrete pavers that have been colored or stained.
Apply the bleach and water to the wet paving slabs
Brush the solution to make sure you get an equal coverage of the cleaner. Make sure you brush the cleaner into all corners of the paving slabs. Once applied leave the cleaner on the surface for 10 -15 minutes.
Whether your patio is sealed concrete or cement, or even sealed concrete pavers, a bleach and water solution makes it easy to clean away built up soil, stains from leaves and pollen, mold, mildew and algae.
Try Concrete Stain
The simplest path to reviving tired pavers is to apply an acrylic-based semitransparent concrete stain, such as Behr Premium Semi-transparent Concrete Stain ($27/gal.; Home Depot) or Valspar Semi-transparent Concrete Stain ($28/gal.; Lowe's).
The acetic acid in vinegar is a little stronger than acid rain, so exposing your pavers to this substance can lead to bleaching, corrosion and the loss of protective sealant.
Whitewashing your outdated brick paver patio is a simple DIY project that can completely transform your space in just one weekend and for less than $60.
As a gentler cleaner, bleach can't harm concrete's durable material. Aside from being an effective cleaner and stain remover, it also acts as a disinfectant to the concrete surface.
Let the solution sit: Allow the bleach solution to sit on the patio for 10-15 minutes. This will give it time to break down any dirt and grime. Rinse the patio: Use the garden hose or pressure washer to rinse off the bleach solution, starting at the opposite end from where you applied it.
Use bleach for heavy-stained slabs
Dilute half a bucket of bleach with equal parts water, applying evenly to your green-tinged patio. You should leave the solution to work for ten minutes before rinsing thoroughly with clean water, repeating the method for stubborn algae.
Use Bleach
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue.
Cleaning pavers with bicarbonate soda and vinegar
Fill the bucket with lukewarm water and then add the bicarbonate soda, making sure it dissolves properly. Then add a little bit of white vinegar. Pour the solution onto the stained areas on your paver surface and use the scrubbing brush to apply it thoroughly.
Be sure to rinse away all traces of the sodium hypochlorite solution. Allow the patio to dry: Allow the patio to air dry completely before replacing any furniture or other items.
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
Cleaning patio slabs with bleach
It is important for us to mention that it may be more environmentally friendly to use detergents than bleach. The bleach will get into the cracks and dramatically improve the look of your patio by killing things like weeds, moss, and algae.
Make up a 50:50 vinegar and water solution, and apply to the paving – using a watering can will help you get even coverage. Leave the solution to soak for around 20 minutes, then use a stiff brush to remove stains. Once you're done, mop with clean water. Leave to dry before you put anything back on to the patio.
Bleach is commonly used to whiten concrete and is very effective at doing so if the initial stain is removed beforehand. Bleaching stained concrete white prepares it for any additional coloring treatments that you may wish to apply in the future.
When bleach is left to air dry on floors and is not rinsed away, it can leave behind bleach crystals after the bleach evaporates. Sodium hypochlorite will break down into salt and water when left to do so. Since undiluted bleach is mostly water to begin with, once the floor dries, salt crystals will be left behind.
Although the concrete is disinfected after just 5 minutes, lightening it will take a little longer. Leave the bleach solution on the concrete for about 20 minutes, then sweep briskly with the stiff broom to dislodge the softened grime. Use the scrub brush to tackle stubborn areas. Rinse off the patio.
A dish soap, like Dawn, is a safe place to start. The surfactants in dish soaps are designed to remove oil and grease, they're gentle enough to be used without issue on your pavers. In a bowl or bucket, mix the soap with water and pour it onto the stain and agitate. Rinse and repeat if needed.
Dish soaps are ideal for this job. While they feature surfactants that are able to remove tough grime like oil and grease, they are also safe enough to use on paving stones without compromising their integrity or appearance.
Yes, you can pressure wash your pavers. But while using a pressure washer at a basic level is simple, ignorant and inexperienced users can easily damage their pavers by using a stream that's too powerful, by holding the wand too close to the pavers, or by falling into any number of other rookie mistakes.