Varnish stains are more difficult to use than oil stains because there's less time to wipe off excess. Brushing and leaving the excess usually leaves prominent brush marks that stand out because they're colored.
Oil-Based Stains
Oil-based interior stain is what most people think of when it comes to wood stain. They are readily available and the easiest to use. They usually have a linseed oil binder that allows plenty of time to remove the excess before the stain dries.
Tight-Grained Woods Struggle to Take Stain
Tight-grained woods have tight pores, meaning there isn't a whole lot of space for the stain to soak into. Maple is the most common tight-grained wood and is known for this problem, but other woods exist as well.
Using a lint free rag is the best way to apply wood stain because it is great for controlling the amount of stain that is applied and for removing any excess stain. Also, the rag leaves a beautiful, even, and brush stroke free finish. It also can easily be thrown out once finished.
For more professional-looking results, use a sprayer or roller to apply the stain first. Follow with back-brushing to eliminate drips and runs. Stain pads do an excellent job of applying the correct amount of stain, especially on smooth wood.
A common mistake when applying stain is not taking weather, temperature and moisture into account. Staining when the deck surface is too hot or the wood is too wet; when rain is too imminent or when nighttime temperatures are too cold can all lead to problems down the road and shorten the life of your stain.
The new stain you are applying over the old stain should be compatible. For instance, if it's an oil-based stain, apply another oil-based stain. If it's a water-based stain, apply another water-based stain. Incompatible stains can lead to poor adhesion or blotchy and uneven finish.
Water-based stains are typically less toxic and easier to clean up than oil-based stains. They penetrate the wood surface to colour the wood without raising the grain, and they don't require a topcoat. Water-based stains can be applied to both indoor and outdoor projects.
Can You Stain Wood Without Sanding? Good news, you can stain wood without sanding the old finish off! But you'll still have to do some prep to make the new gel stain bond properly with the old stain. Start by always cleaning the old finish with a good cleaner and degreaser, like TSP.
The takeaway? Wood stain is intended to be wiped off immediately after application. If the wood stain remains on the wood, liquid solvents in the stain will evaporate, leaving sticky pigments behind that will never fully dry. To remove tacky wood stain, firmly scrub the piece with mineral spirits.
If you used a penetrating oil stain, you may have allowed the stain to build up too thick a coat on the surface of the wood. Penetrating wood stains are not intended to be a surface finish. If applied too thickly, they won't dry properly and will remain tacky to the touch.
Instead, it will create a tacky surface, which may be prone to early peeling. Because the additional coat is not penetrating the wood, it is simply layered on top, which will cause the coat to be more fragile and will not offer the same level of protection as the proper amount of stain.
Because stain requires a dry deck for a secure application, a week of dry fall weather is ideal for staining your deck than in summer or spring humidity. More specifically, the moderate temperatures of early fall are optimal for staining, as the later fall weeks may bring colder days that are too chilly for your stain.
We always recommend two coats of stain for any wood project, but you should only apply as much stain as the wood can absorb. Extremely dense hardwoods may only be able to absorb one coat of wood stain. The general rule of thumb is to apply only as much deck stain as the wood can absorb.
Blood. Blood can be one of the most difficult stains to remove from your sheets, blankets, carpet, and furniture, especially if it's white. It has proteins that bind to the fabric, and its color is difficult to remove completely.
Rubbing. Frantically rubbing a stain can make it spread further and also damage the weave of the fabric. Try gently dabbing the stain away first.
Curry Stain
Turmeric in curry powder is the key culprit that can cause your soft furnishing to be permanently stained if curry gravy is spilled.
The most efficient method of applying stain is to wipe it on using a soaking-wet cloth.
Stain can be applied with a bristle brush, a foam brush, or a cloth. On woods with large, open pores, such as oak, mahogany and ash, increase your pressure to work the stain into the pores. Rubbing or brushing against the direction of the grain will help fill deep pores with stain.