While bleach does kill bacteria and fungi, we do NOT recommend using it to clean out your A/C drain. Your evaporator coil right by your drain is made of aluminum, which corrodes when bleach comes into contact with it.
DO NOT USE BLEACH. It will destroy your evaporator coil.
Apply Coil Cleaner: Spray a commercial coil cleaner on the coils. If using a homemade solution, a mix of warm water and a few drops of dish soap can work. Let it sit for about 10-15 minutes. Rinse (if necessary): If using a rinseable cleaner, carefully rinse the coils with water.
Use an EPA-registered disinfectant labeled for HVAC use to clean non-porous surfaces (Ductwork, coils, plenums, pans, etc) of mold, mildew, and other dirt. BIOSPRAY-TOWER ready-to-use disinfectant and mold cleaner will kill and remove mold, mildew, and odor-causing bacteria.
(Eyewear and gloves are also recommended if you use hydrogen peroxide.) Avoid using bleach or even vinegar (two highly common cleaning products) for your air conditioner. Both corrode metal, which will wear down the device.
You'll need five tools to clean the evaporator coils on your AC unit: a screwdriver, a stiff brush, a large hand mirror, household bleach and wire. Once you have these tools, make sure you know where the evaporator coils are located.
Yes, vinegar mixed with water is often used to perform DIY cleaning on AC coils at home. However, vinegar is usually effective only against lighter dirt build-ups. Nevertheless, you can keep your coils in good shape by mixing white vinegar and water in a spray bottle and spraying the mixture onto the coils.
Air circulating through the ducts inevitably contains dust and dirt and the debris settles on the coils. The moist environment combined with the dusty layer invites mold to grow. Keeping your air conditioner coils clean will make it much harder for mold to develop.
Simply mix one cup of white vinegar with a gallon of warm water and spray the solution on the mold. Give the solution time to work its magic (about an hour) and brush the remnants out of your air conditioner. However, since mold is toxic, you must wear protective gear while cleaning the mold out of your AC unit.
You could also use a homemade mix of water and mild detergent (like dish soap) instead of commercial chemical cleaners. After cleaning the coils, it's also a good time to inspect the other parts of the unit. Inspect the condensate drain pan and remove anything that doesn't belong there.
While Dawn dish soap is a versatile cleaning agent, it's not recommended for cleaning AC coils due to its chemical composition. Household cleaners like Dawn may not effectively remove stubborn buildup and could potentially harm the coils or other components of the system.
After all, one thing we were all taught when we were very young is that water and electrical appliances don't mix. So how do you clean your outside AC unit? The good news is that you absolutely can spray water on your air conditioner if it needs a cleaning, and nothing bad will happen.
Step 7: Spray Your AC With Hydrogen Peroxide
You can use a spray bottle for this step. Fill the bottle with 3% hydrogen peroxide, and then spray the exterior housing and all of your window AC unit's interior surfaces and components. Then use a cloth to wipe down all the surfaces you can reach.
First, check your filters and coils for dirt and debris that may be impeding airflow. Once you've cleaned the filters and coils, run the air conditioner with just the fan so that the ice accumulation can melt off. If the AC still doesn't blow cold air, it could be that refrigerant levels are too low.
Cleaning your AC lines with vinegar is a simple, eco-friendly, and cost-effective way to ensure your air conditioning system runs smoothly. Regular maintenance like this can help prevent costly repairs down the road and keep your home cool and comfortable throughout the year.
You'll need a spray bottle and hydrogen peroxide. NEVER use alcohol or bleach on your machines.
While there are a number of commercially available coil cleaning solutions on the market, air conditioner coils can be cleaned with a solution of a mild household detergent and water. The detergent and water mix is applied to the coil using a low-pressure sprayer.
Like other forms of mold growth, black mold can trigger allergies, respiratory issues, and skin irritation. It's also linked to several respiratory symptoms and conditions, such as sinusitis and bronchitis.
Knowing how to clean AC coils is a money-saving DIY skill, an easy way to maintain efficiency and save on energy costs. Regular, bi-monthly coil cleaning with Simple Green All-Purpose Cleaner during warmer months will keep your AC unit in great working order for years to come.
Cleaning AC Drain Line
We recommend using vinegar instead of a bleach solution because bleach can cause corrosion if you have copper tubing in your AC's drain line. In addition, spilling bleach can ruin your carpet or clothing, whereas vinegar does not harm; it just leaves an odor.
Dirty condenser coils can also make you sick. The Freon gas that circulates through the coils can become contaminated with mold, mildew, and bacteria. When the Freon is released into the air, you can breathe in the contaminants, which can cause respiratory problems.
Any standard dish soap, mixed with warm water should do the trick on really grimy coils. We recommend mixing the water and detergent in a spray bottle and then applying it to the coils. Before using a soft brush to scrub away the grime, give the solution a few seconds to settle in and break up the debris.
How Long Must I Wait After Coil Cleaning Before Turning On The Air Conditioner? Before using the air conditioner, make sure it is totally dry. After cleaning the coils, wait 30 to 60 minutes before turning on the air conditioner.