You really need a minimum of 33” to fit this refrigerator through a doorway.
Measure the “path of delivery” to ensure that your appliance will fit through doorways and hallways. Compare with appliance dimensions. For refrigerators, consider the unit's depth, with and without doors. (Installers can remove doors from most refrigerators if necessary.)
It's a problem many homeowners have experienced, and the solution is relatively easy. You need to learn how to remove refrigerator doors! Remove the refrigerator compartment doors and the appliance will now clear the doorway by being pushed through sideways.
Standard refrigerator sizes vary due to the variety of configurations and styles. However, for most refrigerators, the width can range from 24 to 40 inches, height can range from 61 to 72 inches, and depth typically ranges from 28 to 35 inches. In terms of capacity, typical refrigerators range from 20-25 cubic feet.
Yes, a 35.75" refrigerator should fit in a 36" space, as long as you also take into account extra space needed for air circulation and operating the refrigerator's doors. The depth of the refrigerator is important as well; most refrigerators are 24-36 inches deep.
Measure the Ventilation Space
The refrigerator will need minimum clearances of 2 inches from the back wall, 1-inch from the upper cabinet and 1/8-inch on either side of the fridge.
How wide are refrigerators? Standard refrigerator width ranges from 28 to 32 inches wide for slim top-freezer and bottom-freezer models, with wider side-by-side and French door fridges extending to 36 inches. With doors fully ajar, depth may increase to 45 to 50 inches deep.
With a tape measure, find the width, depth and height of the space where the fridge will be placed. Remember to leave 25 mm of free space around the top, back and sides to allow for the heat produced during refrigeration to escape.
Standard refrigerator sizes range from around 24 to 40 inches in width, 62 to 72 inches in height and 29 to 36 inches in depth. Generally speaking, French door and side-by-side refrigerators will be larger in width and height, though counter-depth models are frequently available in these two configurations.
Cut-out Dimensions: The space or opening (cut-out) in the cabinet where the oven will fit. Overlap Dimensions: The required space around the cut-out space or opening. This consists of the oven trim overlap plus a small amount of clearance*.
Because American style fridge freezers are wider than regular models, they will require a larger entry space. Always check the width of your chosen appliance to determine if it will fit through your door. You may also need to allow extra room due to the packaging your fridge freezer will be delivered in.
The delivery provider will remove refrigerator and freezer doors, if necessary, to get it into the home. The delivery provider will cover finished floors with a protective material to limit the possibility of property damage.
Our Top Pick: LG produces excellent refrigerators that perform well in our tests and receive high satisfaction ratings from consumers, including our survey participants. The Smart French Door Refrigerator with Dual Ice Maker stands out for its simple, user-friendly design and customizable features.
Standard-depth refrigerators typically measure 30 to 35 inches in depth, as opposed to counter-depth refrigerators that sit flush with cabinetry. 3 Allow 3.75" of clearance when installing along a wall. This will allow for the door to open 90 degrees without the handle contacting the wall.
Open your door as wide as possible and measure the distance between the outer edge of the door to the inner edge of your doorframe at its narrowest point. Compare the width of your doorframe with the height of your sofa allowing some wiggle room either side.
Open the fridge door, it goes first, fridge follows and you arc it through the door as person above has said. If you're still not quite there, you can pull the hinge pins on the house door and remove it. If you own a couple 2" ratchet straps, fish them under the fridge and you those to lift the fridge.
30 inch refrigerators are the perfect compromise between apartment-sized fridges and full-size. These space-efficient appliances are the best option for tight spaces. Most models are designed to be counter depth and can be seamlessly installed in your kitchen.
Standard Size Built Ins
These refrigerators typically range from 30 to 36 inches in width, with heights reaching up to 84 inches, aligning with standard kitchen cabinetry heights. The depth is usually around 24 inches, flush with kitchen countertops for a seamless look.
Temperature range: A garage-ready refrigerator should be able to handle temperatures between 38 °F and 110 °F. (If they went lower or higher, that would be great—we just haven't found any that do.) Some fridges marketed as “garage-ready” have a temperature range of 45 °F to 110 °F.
Having too little space can greatly impact on the performance and life of your fridge, such as minimising over-heating.
The following are general minimum clearances for refrigerators: 1/8" up to 1" inch of clearance on each side. 1" on the top (this is above the case, not the hinge). 1" to 2" in the back.
When the door is open, is there enough space on the hinge side for the door to open without hitting your walls? If there's not about 2-inches of space on the hinge side, then you'll have to keep in mind that the refrigerator will need to be pulled out about 2-inches to make up for this.
Prepare the Refrigerator for Moving
Remove refrigerator doors, if necessary, according to the manufacturer's instructions. Be sure to safely store all mounting hardware to reattach the doors at the new location. Secure or take out adjustable shelves and drawers that could become loose during the move.
Standard refrigerators are the most popular choice for most households. They offer a balance between storage capacity and price, and can accommodate the needs of most families. They typically come in widths between 600mm to 900mm.