When a toilet has a clog made of water-soluble materials, it has a chance of slowly dissolving in the water and freeing up the toilet to work properly again. So, clogs that are primarily made of toilet paper can clear themselves.
The water level will go down after 15 minutes, so pour more hot water into the bowl to restart the lubrication process. After another 15 minutes of waiting, you can flush the toilet and the clog will be gone!
Can Toilet Paper Break Down Eventually? In most scenarios, water dissolves paper over time. After all, it's designed to break down in the water. In other words, if you tried to flush the toilet and didn't succeed, you can always wait around 15 minutes to try flushing again.
Is it okay to leave a clogged toilet overnight? In most cases, you can leave a clogged toilet overnight. However, calling an emergency plumber near you might be warranted if water starts leaking from the pipes. A simple clog likely won't cause this, but an inexperienced homeowner messing with the plumbing could.
Hot Water and Dish Soap
Wait for 10-15 minutes while the dish soap and hot water soften the clog. Once you do so, the toilet will unclog and flush freely. Alternatively, you could use hot water and shampoo from the sink if you wish to clear your toilet without leaving your bathroom.
You may just be using it incorrectly. Do this: Next time you have a clog, use your plunger like this: Ensure the flange lip is unfolded. Get a good seal on the toilet drain (that is, make sure you're covering the entire drain or you won't have enough pressure to loosen the clog.)
Check water level in toilet bowl
Listen for a gurgling sound from the drain (a good sign) and check the water level in the toilet bowl. If nearly all the water drained from the bowl, then you've probably cleared the clog.
Then pull up sharply to disturb the clog and loosen it. Continue vigorously pushing and pulling until the water begins to drain. It may take 15 to 20 cycles before the toilet unclogs. Be patient.
However, if the clog is especially tough, your plunger may not be enough. So, what else can you do to clear a badly clogged toilet? The first thing you should do is stop flushing. If your toilet doesn't drain, persistent flushing will only fill the bowl with more water, making the problem worse.
Attempting to force a clog through a toilet with a plunger can often make the problem worse. Instead, create a seal and slowly push down on the plunger before pulling it back sharply. The suction can help pull the clog back up toward the bowl, breaking the blockage and allowing gravity to take over.
One of the most popular methods of unclogging a slow draining toilet is using hot water and liquid soap. Pour the boiling water into the bowl and then add the liquid soap. Let it sit for about 15 minutes before flushing.
You can use the hottest setting from your faucet first. If you need to heat some in the microwave or the stovetop, you don't want it to reach boiling temperatures. Boiling water can cause toilet porcelain to crack. Allow the hot fluid to sit in the toilet for a few minutes to loosen the clog.
Try To Soften the Clog
Put a soap dish, shampoo, or slivers of bar soap in the bowl. Then heat a gallon of water to the temperature of hot tea, pour into the bowl, and wait about 20 minutes. Baking Soda and Vinegar - Try a safe chemical reaction. Measure one cup of baking soda and pour it into the toilet bowl.
Try Hot Water
The easiest and first thing to try when attempting to unclog toilets without a plunger is hot water. The addition of hot water might be enough to loosen the clog and dislodge the blockage. Fill a bucket with about a gallon of hot water from the sink or bathtub.
When it comes to simpler clogs, expect to pay no more than $150, while more extensive blockages that require dismantling the toilet's plumbing could cost between $150 and $500. A DIY drain snake costs between $5 and $50, so it may be affordable for homeowners to take the first attempt at unclogging themselves.
Snake It Out: In the plumbing world, a “snake,” also sometimes called an “auger,” is a tool used to break up drain clogs. Snakes can include everything from disposable plastic tools to complicated metal devices. For toilet clogs specifically, we recommend the more professional kind, with a handle on the end.
Attempting to unblock your toilet with water and washing-up liquid, is one of the cheapest ways to go about it. It's always worth trying this method before calling your plumber. First, take the washing up liquid and pour 2-3 squirts into the toilet bowl.
As it turns out, you can actually unclog a toilet with dish soap instead of turning to a harsh, toxic bowl cleaner. Just as natural dish soap helps break down dirt, grease, and food that may be stuck on dishes and utensils, it can help break down what's in your toilet bowl.
For Harder Clogs, Use an Auger
If the plunger doesn't work, Rod says it's time to bust out a toilet auger. An auger is a cable-like device that you snake through the toilet hole to help loosen up a clog. You can find augers at most hardware stores. To use an auger, you simply snake the cable down the hole.
The most common causes for a slow-draining toilet are: A clog in the drain line. A blockage between the tank and bowl. Poor or Clogged Venting.
If water is rising in the bowl immediately after you've already flushed, that means a clog is blocking the water from moving through the toilet drain. If you flush again, there will be even more water that's unable to make it past the clog, and you'll end up with even more flooding from the toilet bowl.
If you purchase toilet paper that is labeled septic safe it should dissolve completely within 20 minutes. You can test this yourself by taking your septic-safe toilet paper brand and scrunching it into a cup of water.