Concrete and asphalt require more cleaning power. You'll want to use the turbo nozzle on the 1600 PSI for hard-to-clean driveways, sidewalks, and patios as well as brick paving. For wood decks and painted surfaces, switch to the gentler 40-degree nozzle.
You have to know its capabilities, 1600 PSI is good for most home jobs (general siding cleaning/gutters, car washes, cleaning furniture) Don't expect it to clean a whole concrete driveway in one smooth pass.
For instance, a light layer of dirt or dust may only require a PSI of 1,500 to 2,000, while a thick layer of oil or grease may require a PSI of 3,500 or higher to remove.
Concrete cleaning calls for powerful pressure washers featuring high pressure levels of 3000 PSI. However, if you will be using the power cleaner to maintain a range of surfaces in addition to concrete, choose one with adjustable pressure levels and set it to about 3000 PSI when you need to clean concrete.
This 1600 psi 1.2 GPM electric pressure washer, as explained earlier, generates 1,600 Pounds Per Square Inch (which is in the recommended pressure range), and 1.2 Gallons Per Minute (ideal for washing cars, house exteriors, fences, garage floors, etc…).
For cleaning a wooden deck, you'll be best served by using the lowest pressure setting that's still effective. For soft woods like cedar or pine, this is usually about 500 to 600 psi. For harder woods, it can go up to 1200 to 1500 psi.
There's no doubt that electric pressure washers from 1,300 to 2,300 psi can wash a concrete driveway, but it'll take longer. If you have a large driveway with lots of stains, you'll want more power to do the job faster. I chose the 3,100-psi gas pressure washer and cut the job time in half.
Domestic vs Industrial or Professional Pressure Cleaner
If your pressure cleaner only goes up to 1500 psi at maximum, you can still clean your driveway. However, take note that it may take a little longer and more effort, and there may be some dirt and stains it will not get out.
Powerful pressure washers with too much PSI will damage concrete when power washing. Most residential driveways require no more than 3000 to 3500 PSI for proper and thorough concrete washing. Heavy-duty commercial pressure washers and other power washing equipment are too strong for the average residential driveway!
To clean concrete, exterior siding or an asphalt driveway, you'll want at least 2,000 to 2,800 psi and 2 to 3 gpm (4,000 to 8,400 ECUs).
Medium Duty 2000-2800 PSI
This classification ranges from as low as 2,000 PSI to as high as 2,800 PSI. You can use a medium-duty pressure washer for almost any surface. They're great for cleaning concrete, brick, and wood.
The quick answer is yes, power washing can degrade a concrete surface.
For most cars, a psi between 1200 and 2200 is recommended. This range provides enough cleaning power to remove dirt and grime without damaging the car's paint or delicate surfaces.
Select the Correct Pressure Washer
This means you want to rent a pressure washer that meets such needs. To correctly strip old paint, you should work with a power washer with a psi of 2000 or higher.
Vinyl siding can withstand a powerful gas pressure washer (2,500-3,000 psi). Aluminum, stucco or soft-grain wood homes will do better with a less powerful washer (about 1,200-1,500 psi).
Most electric pressure washers create 1300-1700 pounds per square inch of pressure (PSI) with a water flow of 1.5 gallons per minute (GPM), but experienced contractors recommend between 2000 and 3000 PSI and a flow of at least 2.5 GPM to clean dirty concrete effectively.
Selecting the appropriate nozzle and properly holding the wand can prevent damage to your driveway. Use a wide nozzle for cleaning concrete that covers more surface area. The narrow nozzles are designed for removing tough stains in cramped spaces, but the stream can etch into the concrete if used on a driveway.
Any machine capable of producing at least 1,500 pounds per square inch (psi) of pressure can clean concrete, but the work will go much faster if you choose a model producing 2,500 to 3,000 psi, like the gas-powered option below.
A medium-duty pressure washer is strong enough to blast greasy, grimy stains from residential areas. Homeowners can safely clean sidewalks, concrete driveways, decking, and siding with a 2,000 to 3,000 PSI washer.
2,000 to 3,000 PSI
Good for cleaning concrete surfaces with light to moderate oil stains, most automotive cleaning, pools, many industrial applications.
Your pressure washer should have a minimum pressure rating of 3000 psi to effectively clean your sidewalk. There are a few situations where a higher pressure rating might be needed, but exterior cleaning experts all agree and recommend that 3000 psi is appropriate for residential use.
You can power wash concrete all year as long as the temperature is about 40 degrees Fahrenheit. Most homeowners and businesses prefer to do it in the spring or summer to reduce the spread and growth of algae and mold. It also reduces pollen, which can affect allergies.
However, in general, a psi of 3000-4000 is commonly used for residential driveways.
HOW MUCH PSI IS ENOUGH? LIGHT-DUTY pressure washers in the 1,300 to 1,700 PSI range are great for cleaning patio furniture, lawn equipment, stairs, and vehicles such as automobiles and small SUV's.