Decoding the "Hold" Feature on Your Thermostat This feature, often found on digital and smart thermostats, allows for maintaining a manually set temperature, overriding the programmed schedule of your HVAC system. Primarily, there are two types of hold modes: Temporary Hold and Permanent Hold.
OK look. Hold means that the thermostat will obey to your command and you are in full control. It means it is not respecting any schedules or programs. To remove hold, you just have to run a schedule.
These are temporary holds and permanent holds. A temporary hold will keep the HVAC system set to the held temperature for a temporary period of time of less than 12 hours or until the hold is cancelled. A permanent hold will keep the HVAC system set to the held temperature permanently, until the hold is cancelled.
The best way to save money is by combining both. The “run” feature lets you preset the temperature when you're not home to prevent wasting money on cooling or heating an empty home. Meanwhile, the “hold” button lets you change the room's temperature without changing your energy-saving, preset schedule.
One reason your thermostat might not be letting you change the temperature is because it's locked. To unlock a Trane thermostat, press the plus (“+”) and minus (“-”) keys at the same time for three to four seconds, then try adjusting the temperature again.
By pressing “Hold”, your thermostat will lock in the temperature it's currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming.
You'll want to have your thermostat set to heat mode in the wintertime and air conditioner auto mode in the summertime. In order for your system to run on auto mode, you'll need to have either the heat mode or cool mode on. This way, your thermostat knows whether to turn on the furnace or the air conditioner modes.
Remove the temporary hold: Once you have found the current temperature setting, you should see an indicator that shows a temporary hold or override. This indicator may be a flame symbol or a clock symbol with a plus or minus sign. Press the appropriate button or use the arrows to remove the temporary hold.
Yes, using the thermostat hold feature can lead to energy savings, which in turn can reduce your energy bills. 2. What happens if I forget to turn off the thermostat hold? Forgetting to turn off the thermostat hold can lead to increased energy consumption.
If your thermostat is on a hold setting and you wish to remove the hold, simply check for “Cancel,” “Run,” or “Run Schedule.” Depending on your thermostat model, the specific run button you need will be labeled differently.
A credit card hold is typically removed once the transaction is approved. Most credit card authorizations expire within a few minutes or up to seven days. Some credit card holds (such as those from cruise lines, lodging merchants or vehicle rentals) can last up to 31 days.
Cancel Hold
Tap the small x icon in the Hold bubble to cancel the Hold and resume your schedule.
Some of the most common thermostat issues include:
The thermostat is broken, not properly level, or dusty. The thermostat needs to be recalibrated. There is loose wiring causing a thermostat issue.
Press the reset button. Most models require you to hold the button down for 3-5 seconds before releasing. Restore power to your AC. Restore power to the unit at the circuit breaker, and make sure the unit is set to “on” and your thermostat is set to “cool.”
Why does my thermostat say hold? Simply put, it's your device's way of maintaining a set temperature outside of its programmed schedule. Whether due to a Temporary Hold or a Permanent Hold, this function can affect the comfort of your space and your energy use.
A Hold message on a Honeywell Thermostat tells the thermostat to maintain the HVAC system for the building at a set temperature. The temperature will be maintained until the Hold expires or the temperature is manually changed. A Hold can be temporary or permanent depending on its setting.
Most programmable thermostats have many different buttons, including “Hold” and “Run.” These buttons allow you to switch your thermostat back to a manual mode, overriding the programming.
Keeping your fan on AUTO is the most energy-efficient option. The fan only runs when the system is on and not continuously. There is better dehumidification in your home during the summer months. When your fan is set to AUTO, moisture from cold cooling coils can drip and be drained outside.
First, check your filters and coils for dirt and debris that may be impeding airflow. Once you've cleaned the filters and coils, run the air conditioner with just the fan so that the ice accumulation can melt off. If the AC still doesn't blow cold air, it could be that refrigerant levels are too low.
If your thermostat is stuck, the first thing you should do is make sure your system isn't locked. Bumping into your thermostat or accidentally pressing the wrong button can result in it becoming locked, but unlocking it is a quick process.