Check your HVAC system's air filter. If a filter is clogged, especially one near the cold air return, it can interfere both with your air conditioner's ability to cool your home and your thermostat's ability to read the air temperature.
To fix inaccurate temperature readings on your thermostats, you might find something is blocking or covering the temperature sensor and it may simply need to clean any dust that has found its way into the device's sensor or small vent usually on the top of the thermostat.
Clean the Thermostat. Sometimes, when the room temperature doesn't match the thermostat setting, the problem could be dirt buildup on its interior parts. A dirt coating around the inner components may create excess heat and cause the thermostat to give the wrong readings.
A common oversight for a thermostat showing the wrong temperature is the state of its batteries. Dead or low-power batteries can lead to inaccurate readings. Simply replacing the batteries might restore your thermostat's accuracy and functionality.
Some of the most common thermostat issues include:
The thermostat is broken, not properly level, or dusty. The thermostat needs to be recalibrated. There is loose wiring causing a thermostat issue.
If the temperature is set to 74°F but the thermometer shows 78°F, you will have to recalibrate the thermostat to account for this 4-degree deviation. Even with older AC units or furnaces, you might have to recalibrate your thermostat from time to time.
A bad thermostat can be detected when your AC or furnace is not turning on, your HVAC systems are not turning off, the thermostat not responding, your HVAC system is short-cycling, the room temperature not matching the temperature displayed on the thermostat, and the programmed setting resetting themselves.
Dirty or worn flame sensors, blower motor problems, clogs in the condensate lines, and electrical issues are some of the many problems that can leave your HVAC system failing to deliver the temperatures you've programmed in your thermostat.
Your AC might not cool properly due to thermostat issues, an undersized unit, or extremely high outdoor temps—so check those first. Keep an eye on airflow—replace clogged filters every 3 months, and make sure vents and ducts aren't blocked for efficient cooling.
To reset mechanical thermostats, simply turn off the thermostat and flip the circuit breaker. This can be done by going to the breaker panel and turning off the appropriate breaker switch for 30 seconds. After turning the breaker back on, turn the thermostat back on and the thermostat should be reset.
Another problem that can cause your house to be hotter than what you've set the thermostat to is if your home's HVAC system isn't sized properly. An HVAC system that's too large for your house will cool your home unevenly. It will only cool some rooms off and then shut off versus cooling down the entire house.
Locate the sensor, which is a small, round component usually positioned near the bottom of the thermostat. It may be labeled as “sensor” or “thermistor.” Using a soft brush or a can of compressed air, carefully clean the sensor to remove any dust or debris that may have accumulated on its surface.
One of the most common reasons that your thermostat is incorrectly reading your home's temperature is that the temperature sensor is malfunctioning or has failed completely. Replacing a temperature sensor can be very difficult, so there are a few things you should try before you schedule a replacement.
It could be displaying an inaccurate temperature. In this case, your car may not be overheating, but your temperature gauge won't be able to warn you. Thermostats can often go bad after about 10 years of use.
As simple as it sounds, a dirty thermostat could be why the thermostat room temperature and setting do not match. Gently cleaning the thermostat interior with a clean, soft paintbrush is the best way to avoid further damage.
If your thermostat is not reading correctly, it might be due to a dirty or faulty sensor. A quick fix could be to gently clean the sensor with canned air to remove any dust buildup. However, if problems persist, replacing the thermostat could be the next step.
If you're cold even though your thermostat indicates you shouldn't be, your furnace likely isn't the problem. In most cases, it's working just fine. It's your home that needs attention. Lack of insulation, severe air leakage, and/or unbalanced ductwork are frequently to blame.
Try checking the circuit breaker box or replacing the batteries. Bad wiring: The thermostat may be unresponsive if the wiring has gone bad. Remove the cover and check inside for loose, detached, or corroded wires. If you spot any problems, contact an HVAC technician for assistance.
Standard thermostats: Enlist a friend or family member to assist, Position one person by the thermostat and one person by the furnace. Slowly turn the thermostat from off to heat and increase the temperature. Both the thermostat and furnace should make a sound.
For many of us, 70 degrees is the ideal indoor temperature, but when it is close to 100 degrees outside, your AC unit will be working quite hard to meet these expectations. Consider setting your thermostat at 75 degrees to 80 degrees in your home if the outside temperature is approaching triple digits.
Cooling a house from 80 to 72 degrees is a common goal for many, especially during the peak of summer. On average, this process takes roughly two and a half to three and a half hours.