Clogs can also be caused by buildup in the third, lateral section of the pipe. Drano® Max Gel Clog Remover is effective on these clog types as well. Keep some on hand for its reliable clog-busting power!
Pouring a cup of baking soda and then a cup of vinegar into a drain pipe can produce a chemical reaction that is sometimes effective at clearing deeper blockages. Make sure to follow up with hot water to melt away any remaining debris.
It is Extremely Corrosive For Your Drains
When your pipes are clogged, Drano will sit on top of the clog, continually reacting and generating heat until the clog dissolves. This can put a great deal of stress on your drains as the heat can cause PVC pipes to soften and even break or collapse.
Although plumbing chemicals like Drano are designed to break up clogs and clear your pipes, they often make a clog worse for homeowners.
When Drano won't go down the drain, grab a plunger instead. Many people think that these are only good for toilets. However, they can create suction that can dislodge your clog. Make sure that you get a plunger that can seal all the way around your drain.
Baking soda and vinegar may unclog your drain better than Drano ever could. Start by getting rid of the standing water in your drain. If it will go down slowly, just wait until it's gone. If it isn't moving, use a cup or a spoon to get it out of there.
When Drano is left in the drain for too long, it can cause corrosion of the pipes. The chemicals in the product are designed to break own the clog, but if left for too long, they can start to break down the pipes themselves.
For preventive drain cleaning, you can use Drano® Max Build-Up Remover in drains, toilets and even septic systems. Apply Drano® Max Build-Up Remover overnight or before you go to work, then wait 6 to 8 hours before running warm (not hot) water down treated drains or flushing treated toilets.
Using a snake is also more invasive and time-consuming than using a chemical cleaner is, and can often become a dirty job. When it comes to getting at and removing major clogs or clogs that are deep down in your pipes, however, a plumber's snake is your best bet.
Using a solution of baking soda, vinegar, and hot water
For more stubborn clogs, a combination of baking soda, vinegar, and hot water may do the trick. Because vinegar is an acid and baking soda is a base, mixing the two will cause a chemical reaction that will create pressure and possibly dislodge the clog.
The chemicals in Drano may not solve all clogs, and they can lead to a worsening of pipe issues. Drano can build up in a clogged area, and corrode the pipe. With repeated use, these chemicals may eat their way through a pipe, and cause a leak or a collapse of the system.
Because of its corrosive nature, Drano can cause toilet bowls to crack, PVC pipes to melt or break and the glue that holds pipes together can be eaten away. If any of these things happen, you're going to be left with an inoperable plumbing system and costly repairs.
Pouring boiling water is quite risky as it might lead to a steam burn or scalding. Another thing to keep in mind is what type of material you are pouring in into. If you have a porcelain sink, it is likely to crack due to the heat. All in all, pouring boiling water down your drain will only cause issues down the road.
Bring water to a boil and then pour it down the slow clearing drain (recommended to use a whole kettle) Put half a cup of baking soda into that drain and let it sit for a few minutes. Add 1 cup of vinegar for every 1 cup of hot water you pour down the drain. Cover the drain with a plug and let it sit for 10 minutes.
A common cause for clogs, especially in kitchen drains, is a buildup of grease. Soap and hot water can be an effective Drano alternative to dissolve grease blockages. Pour roughly ½ to 1 cup of dish soap down the blocked drain. Following this, pour about a gallon of boiling water, taking care not to burn yourself.
Professional Plumbing Tools 101: Drain Augers
Also known as drain snakes, there are several different versions of drain augers that most plumbers will carry with them at all times. In essence, it's a basic tool, but an auger is best for tough drain clogs that just won't budge and for cleaning out drains, too.
Baking Soda and White Vinegar
This mixture is a great green alternative to Drano because most people have these items somewhere in their kitchen. To use this method, pour half a cup of baking soda into the clogged drain and follow it with a half cup of white vinegar.
The harmful chemicals in Drano can end up being corrosive to your pipes. Drano has been known to cause toilet bowls to crack, soften and break PVC pipes and break older corroded pipes. Over time, the continued usage of Drano can lead your pipes to corrode, crack and eventually fail.
Deploy Drano. Does this particular clog seem bust-up proof? If standing water remains, use Drano® Max Gel Clog Remover. It pours straight through the water and attacks the clog directly.
With professional strength, the gel blasts through tough hair clogs – dissolving hair on contact. Wait for 15-30 minutes then use a blast of hot water to flush away what's left of the clog. Drano Hair Buster Gel works safely on metal and plastic pipes.
For use on clogged or slow-running drains, pour half of the bottle (32 oz. size) slowly over drain. For extremely slow-running drains or complete clogs, pour in entire contents of 32 oz. bottle.
Reuse every four weeks
To help prevent toilet clogs in the future, you can safely use Drano® Max Build-Up Remover monthly.
Single Use, Not Frequent Use
Because of the chemicals found in these types of products, you could cause irreparable damage to your pipes. In most cases, a single use of Liquid-Plumr or Drano will not cause any issues with your pipes, though you should avoid using them in your toilet.