Just take a can of WD-40 (preferably one with a long flexible hose) and spray it inside of your faucet. The WD-40 will loosen up the hard water and make the diverter work as smoothly as day one. The same goes for a hard to turn shower knob, a sprits of WD-40 and it will work like brand new.
The only use of WD-40 Silicone spray for faucets is to loosen rusted nuts/bolts and lubricate seized fixtures. Squirting through faucets may allow the lubricant to access the seized fixture threading from the inside lining of the pipe rather than the outside.
Remove limestone stains with WD-40!
That is the reason it adapts well to removing limestone stains too! Spray the product directly on the faucet, showerhead, or sink and then wipe it with a cloth or an old toothbrush. It tackles the most stubborn limescale deposits quickly.
You probably didn't know you could use WD-40 for bathroom cleaning, but because it's a lubricant that's not as harsh as most chemicals you use in the bathroom, it's great for getting rid of hard water stains and other stubborn stains without harming your surfaces.
Soak a rag or a cloth in vinegar or lemon juice and wrap it around your tap, ensuring all areas are covered. Secure the cloth with an elastic band and leave for an hour. Occasionally squeeze the cloth to release more of the acid onto the tap. Remove the cloth and wipe away the limescale.
A quick once-over with a cloth sprayed with WD-40 is great for removing soap scum from shower doors and can also prevent mildew from returning.
After a routine cleaning, add a few ounces of liquid toilet cleaner or drop a dissolving tablet into the tank. The cleaner will run into the bowl with each flush, killing bacteria and eliminating residue. It will also help break down mineral deposits in the siphon jets.
It is widely claimed that adding aluminum foil to a toilet tank helps to achieve a clean and shiny toilet, but critics challenge these claims due to a lack of scientific evidence.
WD-40 doesn't have the same viscosity as traditional grease or oil, and it can erode certain finishes, and it can cause problems when used as a substitute.
Cut down on snow shoveling time with this neat trick: Spray the original WD-40 formula on both sides of your shovel before you start. Watch snow, ice and slush slide off the surface. No more stopping every few steps to dislodge built-up snow from your shovel.
Yes it is! If you spray a roach directly with WD-40, you can instantly kill it! Moreover, you can spray it on frames, windowsills, doors and screens to keep bugs out of the house. Do be careful not to breathe in the fumes of the spray and it is better not to attempt this while there are children in the house.
While WD-40 may not be a conventional plumbing tool, its versatility and lubricating properties make it a valuable resource for addressing various plumbing problems. From loosening stuck fasteners to preventing rust and even quieting noisy pipes, WD-40 can be a handy addition to your plumbing toolkit.
For those stubborn spots that occasionally pop up, a simple solution of equal parts water and white vinegar usually does the trick. Apply it with a soft cloth, gently rubbing the affected areas, then rinse thoroughly with water and dry. This method keeps your tapware spot-free and shining brightly.
We recommend using a mixture of ¼ cup of vinegar for every 1 cup of water. This ensures your toilet tank is being disinfected without causing damage, which the use of bleach or chemical cleaners can do.
White vinegar is the perfect cleaning agent if the toilet rim has mineral deposits. Since vinegar is an acidic product, it dissolves the buildup (and even takes care of any bacteria problems to a degree), leaving your toilet as good as new.
The growth of bacteria could also be causing those ring stains. “Certain types of bacteria, such as those that thrive in hard water conditions, can contribute to the formation of stains,” Faraone explains. And the bacteria can form a biofilm in the toilet bowl, leading to discoloration and stains.
Specialized Tools and Techniques: To keep shower glass clean, hotels use soft cloths to dry the glass after each cleaning session, preventing water spots. For tougher grime, a mixture of liquid dish soap and baking soda can be applied, especially in the shower door tracks, where buildup is common.
A light coat of WD-40 on a cloth can help remove soap scum from bathroom tiles and prevent mould and mildew. It can also be used to clean grout. Whilst WD-40 can be used effectively, we recommend using a dedicated tile cleaner such as LTP Multipurpose spray.
STEP ONE: WET YOUR MAGIC ERASER.
Water activates the tough micro-scrubbers, so they can dig deep and remove hard water stains from glass and the toughest soap scum, making cleaning shower glass easier than ever.
With Vinegar: Wrap a bag or cloth covered in vinegar around your faucet. Keep it there for several hours and wipe down the surface when you're done.
WD 40 is great for cleaning out keyboards or loosening bike chains – but did you also know it is really good at removing limescale from your toilet? While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom).
CLR can be used for all the same things as Lime Away, but it can do even more. You can use it on outdoor furniture, car parts like radiators and engine bits, and even on tools and equipment.