Sealcoating provides a protective layer on your driveway and saves you money in the long run just like a regular painting of your house. By seal coating every 2-3 years, your driveway will stay strong and serve as an attractive entranceway to your home.
Not sealing it will only make it more susceptible to damage from the elements and other things. Sealcoating can effectively protect your driveway from rain, hail, snow or oil. It will give you a water-resistant surface, protecting you from the elements. Your driveway is also protected from the sun's damaging UV rays.
The Drawbacks of Seal Coating
There are some drawbacks to sealcoating, however. One is that it can be messy and difficult to apply evenly. It's also important to note that sealants will not repair significant damage to your driveway; they will only protect it from further damage.
He added that sealing a driveway could yield unwanted consequences: Oil from the bitumen (the black glue that holds the asphalt together) will be tracked into the home, or the sealant could wear away unevenly, making the surface look as if it's peeling.
Sealcoating not only extends the life of your asphalt pavement, but it's also an effective way to save money. Unprotected asphalt leads to cracks and potholes which will cost you more in repairs.
For it to be successful though, you need to apply the first coat of sealant within 12-18 months after asphalt installation, and then again every 2-3 years. Any more frequent than this and your driveway may begin chipping or flaking, but any longer than this and your driveway could deteriorate.
There Are Cracks or Holes in the Surface
Another sign that your driveway needs to be sealed is cracks or holes in the surface. These can be caused by several things, such as tree roots, weather damage, or normal wear and tear. If you notice any cracks or holes, it's important to have them repaired as soon as possible.
Driveway sealing can protect your investment. The bottom line is that sealcoating and proper maintenance for your driveway can prevent small cracks from turning into big ones and keep water from seeping into the base material.
It also prevents water from turning hairline cracks into bigger ones. The aggregate in the mix enhances traction, acts as a wear layer, and fills small cracks. Also, sealcoating gives the driveway a uniform black color.”
While slathering seal coat over asphalt in a thick layer can be tempting, a “more is better” approach is detrimental to the pavement beneath. Too much sealer can lead to premature cracking, which will shorten the lifespan of your driveway.
Seal coating allows for a smoother, crack-free driveway, and because smoother pavements extend pavement life by as much as 10% to 25%, you won't have to worry about replacement or repairs for a much longer period of time.
Rain can wash away all of the hard work that you put into your driveway. The sealer will be washed away by the rain if you don't wait long enough for it to dry.
Experts recommend that you wait at least three months – weather permitting. It is not unusual to wait up to six to nine months before sealing your asphalt parking lot, especially if you installed it in the fall. A warm summer day, towards the evening, is the best weather to apply a seal coat.
You may walk on the driveway after 24 hours. The sealer will take a minimum of 30 days to fully cure and is sensitive to animal droppings, tree droppings, water stains from irrigation systems, ponding water & tire markings during this time.
You'll get the best results if you take the time to repair cracks in the surface of the driveway before applying a final coat of sealant.
Sealcoating is not designed to be an asphalt crack filler, it is made for sealing the surface and protecting it from the elements such as UV light, salts and oils. It is not flexible enough to fill a crack without re-cracking and it does not have adhesion quality's that Asphalt Crack Filler has.
Sealcoat material will not properly adhere to the asphalt pavement if it is wet. Asphalt must be 100% dry in order to apply the material. Sealcoating application and drying do not pair well with rainy or even misty conditions. Rain prevents the coating from drying.
What's the best temperature to seal a driveway? The ideal conditions for application are during the day when pavement and ambient temperatures are at least 50°F and rising, and no rain is forecasted for 24 hours. If these recommendations are not followed, the procedure will not yield desired results.
Simply put, if water can enter the gaps between your house and concrete, it can cause problems down the line. Caulking these gaps is a proactive way to prevent not only water damage and future concrete settling, but can also help keep pests to a minimum.
Applying two coats of any sealer will dry and create a better finish much better than one thick coat. These sealers are water based, and they cure and form a film primarily during the evaporation of water from the coating. A thin coat will evaporate much faster and create a single uniform layer.
The first coat of the first time the asphalt is sealed – a squeegee is very effective in getting sealer in all the nooks and crannies of unsealed asphalt – after that coat, sealer ought to be spray applied for maximum coverage and thickness.
In some cases, a residential driveway will only need one coat of sealant. However, if the asphalt sealcoating has never been sealed before, it may take a second coat to give it the rich, deep finish that most homeowners prefer. A second coat may also be indicated if there is some “unraveling” of the asphalt.