First of all you don't really need to seal your grout. I assume it is a cementitious grout, which is porous. Put generally speaking you don't have to seal it. It will get darker over time whether you seal it or not, but it will be easier to clean and will less likely stain if you do seal it.
Whoever installed your floors most likely did not seal the grout because it needs time to harden and cure completely.
Grout is porous and will absorb liquids that are spilled on it. It is always recommended to seal grout because sealed grout keep clean bathroom, kitchen. Even sealed grout prevent it from moulds. When professional sealed the grout it makes the tile and grout waterproof.
The Drawback of Using Grout Sealer
Moisture can still pass through most sealers, meaning grout isn't entirely waterproof even when sealed. Over time, grout in areas like bathrooms will naturally stain or show signs of aging, regardless of sealing.
Unsightly Grout Stains and Discoloration:
One of the most noticeable effects of neglected grout sealing is the gradual accumulation of stains and discoloration. Grout is porous by nature, which means it readily absorbs liquids, dirt, and debris.
SINGLE COMPONENT GROUT
Technically, it is a urethane or an acrylic-silicone resin grout. It shares many of the benefits of epoxy grout: it has excellent color consistency, doesn't need to be sealed, resistant to breakage and chemicals, resists mold and mildew, is stain resistant, and doesn't effloresce.
It is important not to leave any excess sealer on the tile surface because it won't get absorbed and it can leave a sticky surface that can become a maintenance problem.
You can seal the grout the day after you applied it or 100 years later. If it isn't dirty, seal all three sides of the shower with a tile sealer or masonry sealer. That will make the grout water-resistant, if not waterproof, and help prevent the growth of mold and dirt.
High-traffic floor grout: Should be sealed every six months to one year. Guest bath and shower grout: Should be sealed every year or two, depending on frequency of use. Backsplash grout: Backsplashes in high-traffic areas should be sealed once yearly on average.
The best line of defense and protection for your grout is to have it sealed. Sealed grout will not only get the protection it needs against crumbling, but it will also be protected against heavy staining as well. Your tile and grout need to be professionally cleaned before getting sealed for best results.
Most porcelain tiles won't need sealing, as they are naturally robust and offer water resistance. However, if you have polished porcelain or other porous tiles they must be sealed to stop water from entering and damaging the tile. Unsealed tiles can stain, and attract dust and dirt which can be difficult to clean.
Grout offers a number of valuable benefits: It gives your floor or wall a crisp finished appearance. it helps keep dirt and debris from getting in between and under your tile.
While the tile industry does not require sealing, it is always recommended, especially in wet or high-traffic areas. Penetrating sealers are the most commonly used and offer high water, chemical and stain resistance. They provide protection without changing the appearance of the grout joint.
Many companies don't automatically include grout sealing in a job with new tile flooring for a few reasons. First, companies can't seal grout until at least 48 to 72 hours after applying grout. By that time, bathroom remodelers typically have already cleaned up from the job and left your home.
If grout is not sealed, it can absorb water and become a breeding ground for bacteria. It can become unsightly and ruin the entire design of your space and be hazardous to your health. If you have young children or tiles in an area where you eat, you need to ensure that they are as clean as possible.
If you notice your tile grout is changing color, specifically getting darker when it's wet, you can be pretty sure the seal is broken and needs to have some grout sealing reapplied by a professional. You may also notice dirt and grime gathering between your tiles that doesn't wipe off when you apply a grout cleaner.
The typical recommendation is to wait **at least 48 to 72 hours** after grout installation before applying a sealant. This waiting period ensures that the grout has thoroughly cured and set, providing a solid base for the sealer to adhere to.
There are a number of factors that can cause cracks and issues in the grout. But if cared for properly, grout can last for up to twenty years.
You can apply new grout right over the top of the old grout. To do this, all you need is a grout removal tool. Use the tool to strike out the old grout, making sure the depth is at least 2mm, which is about the thickness of two dimes stacked one on top of the other.
Using Too Much Sealant
As a result, unnecessary time will have to be spent scrubbing the excess sealant off. Instead, try using less product to minimize the amount that gets onto the tiles and make it easier to clean up.
It is generally better to use brushed grout sealer than spray sealer as you can apply more sealer with more control.
Normally sealers are not mixed into the grout when you install the grout, so that may be part of the problem? Grout turning white can be caused by efflorescence which is the calcium from the water and the underlying concrete or mortar migrating up through the porous cementitious grout.