Your ice maker likely stopped working because of a frozen water line, a clogged water filter, or an accidental shut-off. Most fixes are simple and require checking the water supply, resetting the unit, or replacing the filter.
Ice makers can freeze up due to temperature fluctuations, causing a halt in ice production. If the water overflows or the freezing cycle is incomplete, it may lead to a build-up of frost. A blocked or kinked water supply line can stop water from reaching the ice maker, preventing ice production.
Put rags and the ice bucket beneath your ice maker to prevent water from accumulating during these tests.
Clogged water filter
Cause: Your filter works hard to help reduce contaminants in your water, but can become clogged with particles it may trap over time. A clogged filter can send less water to the ice maker, which may cause a decrease or halt in ice production.
Possible solutions
If the Ice maker is making ice but not dumping it into the ice bin, try resetting the Ice Maker. To reset the ice maker, unplug the refrigerator for 1 minute. After resetting, wait a couple of hours and check for ice production; ice is in the bin.
How to fix a refrigerator that's not making ice
For the best results, make sure you heat the spatula first in hot water. DO NOT use a knife, as this might damage the freezer walls and you could injure yourself if the knife slips. Never pour hot water into an ice-covered freezer compartment, as this could cause damage to the unit and the risk of scolding is high.
Conclusion: While the exact lifespan of an ice machine can vary depending on the factors mentioned above, a well-maintained and properly used machine can typically last 5-7 years or longer.
If the icemaker mould is empty, you can manually pour about 4 ounces of cold water in the icemaker mould. Wait about 2 - 3 hours. If the icemaker has frozen and ejected that batch of ice cubes, you know the icemaker itself is working.
True Ice Maker FLE Code Reset and Filter Replacement Issue
To clear it, turn off the ice maker, wait five minutes, then turn it back on. Ensure the new filter is properly seated and water supply is active.
To reset your ice maker:
Replacing an ice maker assembly is often affordable compared to replacing a refrigerator—but the best choice depends on the full picture: If the refrigerator cools well, seals well, and is in good shape, ice maker repair/replacement is often worth it.
During each freeze cycle the evaporator needs a full, measured charge of water. If flow is restricted, the plate fills unevenly, the machine can't freeze properly, and control logic starts throwing “low water” conditions.
There are several factors that influence the time it takes to freeze ice. On average, it can take 30 minutes to up to four hours to freeze ice.
Common causes include:
Dirty or clogged water filter. Incorrect freezer temperature. Faulty ice maker module or thermostat. Airflow blockage inside freezer.
Check Water Supply: Ensure the water supply line is connected properly and free from kinks or blockages. Restart the Ice Maker: After eliminating any blockages and ensuring the water supply is clear, turn the ice maker back on. It may start a new ice-making cycle once powered up.
There are several reasons your ice maker may suddenly stop working, including a blocked water dispenser, issues with your water supply line or a clogged water filter.
If the icemaker on your Refrigerator will not be used for some time, such as during a vacation or when the appliance is placed in storage, we recommend that you shut off the water supply to the Refrigerator and turn off the icemaker.