Why is my Goodman AC unit not blowing cool air?

Author: Andreane Lindgren DDS  |  Last update: Sunday, April 26, 2026

Goodman air conditioner isn't blowing cold air Take a look at your thermostat. It should be on “cool” and “auto.” If you choose “on” instead of “auto,” your fan will run even when it's not actively cooling. Check your air filter. If it's dirty and dusty, replace it with a new one.

Why is my AC running but not blowing cold air?

To fix an AC not blowing cool air, ensure the thermostat is set to "cool" mode and the temperature is set lower than the current room temperature. Inspect the air filter as a dirty filter can restrict airflow. Ensure the condenser coils are clean and free of debris. Make sure vents are open and unobstructed.

How do I reset my Goodman air conditioner?

To reset the air conditioner, once you have located the reset button, look for the circuit breaker in the electrical power service panel, corresponding to your Goodman air conditioner system. On searching the reset button, hold it down for about 20 seconds and release. If the AC does not restart, then repeat the step.

What are common problems with Goodman air conditioners?

Common Goodman Air Conditioner Problems and How to Fix Them
  • Weak Airflow. The efficiency of your Goodman air conditioner can be reduced by as much as 15% if your airflow is impeded. ...
  • Goodman AC Unit Not Cooling. ...
  • Fan is Noisy or is Failing. ...
  • Increased Humidity. ...
  • More Goodman HVAC Troubleshooting.

Why is my AC not blowing cold when it's hot out?

The first issue it can indicate is low coolant in the system. The second issue is the restriction of airflow. An AC system needs enough coolant in it and proper airflow for it to run efficiently and accurately. These are two common reasons that cause systems to stop working.

Goodman Air Conditioner Runs but Not Blowing Cold

Should I turn off AC if not blowing cold air?

Turning off your AC when it's not cooling is more than a precaution; it's a necessary first step in troubleshooting and protecting your system from further damage. By understanding when to perform simple checks and when to call in the experts, you ensure your air conditioner remains a reliable refuge from the heat.

Why is my AC only blowing hot?

A dirty, clogged HVAC filter is a common cause for your AC blowing warm air. And, it's an easy one to fix. If you're keeping up on your maintenance, you'll take care of this problem before it happens. The filter traps dust, dirt, and contaminants as they pass through your system.

What is the life expectancy of a Goodman AC unit?

The simple answer is that a Goodman air conditioner will last around 10 to 15 years. However, if you adhere to a schedule of routine maintenance and use the system properly, you may get up to 25 years of use due to the quality that goes into its manufacturing.

Will dirty AC coils affect cooling?

Poor cooling: Coils covered in dirt or other debris can't absorb heat effectively, causing poor cooling or warm airflow from your vents.

How to check AC capacitor?

Test the Capacitor

Place the multimeter probes on the capacitor terminals. The multimeter will display a reading. Compare this reading to the rated capacitance value printed on the capacitor. If the reading is significantly lower than the rated value, the capacitor is faulty and needs to be replaced.

Where is the AC reset button?

In AC systems, the air conditioner reset button is on the outside unit's lower edge, typically close to the ground. Some models have the reset button located behind the service panel, which may require tools to remove. Reset buttons are usually red or yellow with a clear “reset” label.

How to reset Goodman control board?

Reset the Control Board:
  1. To reset the control board, start by turning off the power to your HVAC system at the circuit breaker.
  2. Wait for about 30 seconds to allow any residual power to drain from the system.
  3. Turn the power back on at the circuit breaker.
  4. If your system has a reset button on the control board, press it.

Why do I have to reset my AC unit?

This issue is when a circuit breaker powers on, protecting your appliances from voltage hazards. Sometimes, after a breaker is tripped, your AC unit may not work as well as before. If you have it set at a cool temperature but all you're feeling is warm air — a quick reset is sometimes all you need.

How do I reset my central AC not blowing cold air?

Use these tips to reset an air conditioner using the reset button:
  1. Turn your thermostat to the “off” setting.
  2. Turn off the circuit breaker that powers your AC.
  3. Press and hold the reset button for three to five seconds.
  4. Restore power to your AC by flicking the circuit breaker back on.

Why is my AC only blowing a little cold air?

Most of the problems we see when someone's air conditioner is blowing out a weak stream of air begin with a dirty air filter. The best way to prevent problems relating to your air filter is not only to clean it regularly, but also to replace it when cleaning is no longer an option.

Why is my compressor running but not cooling?

If you're wondering, “Why is my AC compressor working but not cooling?” The problem may lie in several potential factors, including refrigerant issues, compressor malfunctions, or airflow blockages.

How do I know if my condenser coil is clogged?

Here Are Five Telltale Signs That Your AC Coils Are Dirty And Need to be Cleaned
  1. Your electricity bill has been going up. ...
  2. Your unit seems to be running longer for no reason. ...
  3. Your home doesn't feel as cool as it should be. ...
  4. The Coil is Covered in Frost While Running. ...
  5. Higher Indoor Humidity.

What is the lifespan of a cooling coil?

How Long Does An AC Coil Last? The lifespan of your system's coils isn't set in stone, but factors such as the quality of the coils, the frequency of use and the level of maintenance they receive are all relevant. On average, evaporator coils can last anywhere from 10 to 15 years.

Can you clean AC coils without removing?

Here's what you'll need: Soft Brush: A soft-bristle brush is ideal for gently removing dirt and dust from the coil's surface without damaging the delicate fins. No-Rinse Coil Cleaner: This specialized cleaner is designed to dissolve dirt and debris on the evaporator coil without rinsing.

Is Goodman a good AC unit?

Goodman® is one of the biggest names in home cooling, heating and energy-efficient home comfort. That's because Goodman lives up to its name in a big way, with time-tested energy-efficient technology, highly durable materials and spot-on manufacturing.

Which AC brand lasts the longest?

Which HVAC Brands Last the Longest?
  • Mitsubishi Electric: Superior Efficiency and Durability. ...
  • Goodman Air Conditioning and Heating: Affordable and Long-Lasting. ...
  • Rheem: Reliable Performance for Decades. ...
  • Honeywell: Smart Home Integration and Durability. ...
  • Lennox: High-End Performance for the Long Haul.

How much does it cost to replace a Goodman air conditioner?

Depending on size, efficiency, and performance, a goodman ac unit price can be anywhere from $3,350 to $5,200 to install.

Why is my AC not blowing hot air?

Issues with the pilot light, high limit switch, blocked burners, leaky ductwork, electrical problems, and blower motor failures are common reasons for HVAC systems blowing cold air.

How do I know if my air conditioner condenser is bad?

Signs Your AC Condenser Might Be Failing
  1. Reduced Cooling Performance: This is the most common symptom. ...
  2. Warm Air Blowing from Vents: If your AC is running but only blowing lukewarm air, it's a strong sign that the condenser isn't properly expelling heat.

Should my outside AC unit be blowing cold air?

If your air conditioning unit is ac blowing cold air outside, it might mean there's a problem with cooling the air inside. This could be due to refrigerant leaks, frozen coils, electrical issues, or airflow problems. It's important to find out why to fix it and keep the cold air inside.

Previous article
What is the best mixture to clean windows?
Next article
What happens if you mess up ceramic coating?