A malfunctioning or improperly placed thermostat can cause your furnace to short cycle. Common issues include: Old wiring or dead batteries: Replace batteries or old wiring to ensure accurate temperature readings.
The simple solution: Turn your furnace off and check the filter. If it's dirty or it's been 3 months or more since you changed it, put a new, high-quality filter in place.
If your furnace won't kick on when you turn the thermostat up, it could be due to a variety of reasons such as a tripped circuit breaker, a faulty thermostat, or a problem with the furnace itself like a malfunctioning igniter or gas valve. Checking these components might help you figure out the issue.
Blocked vents or a clogged air filter may cause your furnace to run and then shut off too early. It's easy to fix these issues on your own. You should change your furnace filter at least once every three months. Follow our guide to do it yourself.
Clean your Air Filters, Vents, and Ducts – A clogged air filter will struggle to meet the thermostat's set temperature since the dirt and debris buildup prevents air from circulating through the vents. And as airflow into living spaces drops, so do comfort levels.
Your thermostat will not be able to reach your desired temperature if you have something blocking the vents. Check the vents around your home and make sure you do not have any items such as furniture in the way of your vent's airflow. While you're at it, make sure all of your vents are open.
Dirty or worn flame sensors, blower motor problems, clogs in the condensate lines, and electrical issues are some of the many problems that can leave your HVAC system failing to deliver the temperatures you've programmed in your thermostat.
A lack of airflow can cause your furnace to stop heating before reaching the set temperature. Ensure there is nothing impeding airflow around your furnace, within your furnace and through your ducts.
The purpose of the reset button on a furnace is to shut it down before it can trip your circuit breaker. The need for this may arise if the furnace becomes too hot, or if there is some sort of electrical system interruption.
Furnace is not producing enough heat.
This may be caused by obstructed airflow or dirty or misaligned gas burners. In some cases, airflow is obstructed by a dirty furnace air filter, and if it is replaced, the problem is solved.
Short cycling is a common sign of a bad flame sensor. The sensor thinks that there isn't a flame, so it shuts off the gas as a safety mechanism. Except, there is a flame and without the gas to supply it, it dies. This is a frustrating problem, but an HVAC technician can fix it.
Check the Power Source Sometimes the problem between the thermostat and your furnace is as simple as replacing the batteries. Many digital thermostats use standard batteries to power their functions. Also make sure to check there is power at the furnace as well.
Thermostat Troubles Can Cause Short Cycling
Your furnace or central air conditioner spends a good amount of energy simply turning on and off, which is why you want yours to run for at least 15 minutes at a time before shutting off.
Leave the breaker(s) off for at least 10 minutes while the system is off and “rebooting.” After 10 minutes have elapsed, go back to the breaker box and flip the HVAC breaker(s) back on.
You should not reset the burner more than two or three times, the reason is you may be pumping some fuel into the heat exchanger that is not igniting.
One of the leading causes of short cycling is an oversized furnace. If your heating system is too powerful for your home's heating demands, it will quickly heat your living space, causing the thermostat to reach the set temperature and signal the furnace to turn off.
The thermostat needs to be recalibrated.
Sometimes, your furnace or AC system won't hit the thermostat temperature because the thermostat isn't correctly calibrated. This can be a common issue with new thermostats, and also often occurs after a power outage or when the thermostat's batteries are running low.
When temperatures drop below zero or even below freezing for extended periods of time, sometimes your furnace can't keep up. If your home is not heating up to the temperature you've set, try lowering it a few degrees. The temperature of the air coming out of your vents doesn't get warmer by turning up your thermostat.
If your furnace is blowing hot but your home is still cold, it may be a problem with your ductwork. You may have leaky or damaged ducts that are letting hot air escape and cold air in. Sometimes a damper in the system can get miss-adjusted or come loose, thereby inadvertently blocking or reducing airflow.
If you're cold even though your thermostat indicates you shouldn't be, your furnace likely isn't the problem. In most cases, it's working just fine. It's your home that needs attention. Lack of insulation, severe air leakage, and/or unbalanced ductwork are frequently to blame.
There may be drafts and pockets of colder air near the floor; The walls are colder and don't emit the usual amount of infrared radiation, so you lose heat due to your body emitting more IR than it receives; You may spend more time indoors and hence have less physical activity, so your body generates less heat.