How do you get stains out of the bottom of a toilet bowl?

Author: Uriah Strosin  |  Last update: Sunday, December 3, 2023

To remove limescale from the bottom of your toilet you will want to pour vinegar into your toilet bowl and leave that on there for three to four hours. After the vinegar sits, you can scrub those stains with either a toilet brush or a wet pumice stone and flush the toilet.

How do I get brown stains off the bottom of my toilet?

To use, simply do the following:
  1. Open your bathroom window to make sure the room is well ventilated.
  2. Pour 250ml of white vinegar into the toilet bowl.
  3. Add 200g of bicarbonate of soda, then pour over another 250ml of vinegar.
  4. Let the cleaner sit for 5 minutes.
  5. Scrub the remaining brown marks with your toilet brush.

What causes brown stain in bottom of toilet bowl?

If you get brown stains in your toilet bowl, the good news is that it's not caused by anything that you, ahem, do in the bathroom. It's actually due to high concentrations of minerals in hard water, like calcium, iron, and manganese, that build up inside the toilet bowl over time, according to Hunker.

How do I get black stains off the bottom of my toilet bowl?

Here's what you need to do:
  1. Grab the Borax and pour ¼ cup into your toilet bowl. Then, using a toilet brush, swish it around.
  2. Add 1 cup of vinegar. Allow the solution to sit in your toilet bowl for about 20 minutes.
  3. Use a toilet brush to scrub the bowl clean and eliminate any remaining stains.

How do you get permanent stains out of a toilet bowl?

The best way to clean toilet stains from tough mineral buildup is with lemon juice or any source of citric acid. Spray on the lemon juice and leave it overnight. Then spay on another light layer and wait a few minutes before scrubbing your toilet. Flush to rinse away the stain.

Easy Way to Clean Toilet Bowl Stains | Remove Toilet Hard Water Calcium Deposit Without Scrubbing

Can you clean a badly stained toilet bowl?

White Vinegar and Baking Soda

Distilled white vinegar is a natural cleaner, disinfectant, and fungicide, and baking soda is a natural deodorizer, whitener, and mild abrasive. This stain remover combo works best when you need to know how to get rid of toilet stains caused by minerals or mold.

How do you get brown limescale out of a toilet?

How To Remove Limescale From Your Toilet
  1. Pour vinegar into the toilet bowl.
  2. Leave for 3-4 hours.
  3. Scrub the toilet bowl.
  4. Flush the toilet.
  5. Repeat as necessary.

Does WD 40 remove toilet bowl stains?

A much better solution is to use some WD-40 Multi-Use Product. Most people don't know that WD-40 can solve many of their household cleaning needs quickly and easily. When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it.

What is the best cleaner for toilet stains?

  • Best Overall. Lysol Toilet Bowl Cleaner Gel. ...
  • Best Budget. Scrubbing Bubbles Bubbly Bleach Gel Toilet Bowl Cleaner. ...
  • Best Splurge. Ecover Toilet Bowl Cleaner. ...
  • Best Tablet. Vacplus Automatic Toilet Bowl Cleaner Tablets. ...
  • Best Automatic. Lysol Automatic In-The-Bowl Toilet Cleaner. ...
  • Best Natural. ...
  • Best Foaming. ...
  • Best Scented.

Does Coke get rid of brown stains in toilet?

The carbonic acid that is in coke is what helps to clean toilet stains. Picture the acidity slowly working its way through the stains, melting them away. It can take a while depending on how stubborn the stain is which is why it's vital to have a suitable cleaning method depending on how bad the toilet condition is.

What happens if you accidentally mix hydrogen peroxide and vinegar?

Hydrogen Peroxide and Vinegar

“Combining these two creates peracetic acid or corrosive acid, an irritant that, in high concentrations, can harm the skin, eyes, throat, nose, and lungs,” says Bock.

Does OxiClean clean toilets?

OxiClean™ Bathroom Cleaner can help you thoroughly clean both the toilet bowl and around the base in an effort to keep scum buildup at bay.

Should I use vinegar or bleach in toilet?

If you want to really get your toilet tank clean, then you need to make sure you have the right cleaning products for the job. Vinegar is a great toilet cleaning solution. Not only is it free of chemicals and naturally antibacterial, it's also an acid, so it will remove minor lime and calcium deposits.

Can I use magic eraser on toilet bowl?

Grab some gloves and use a Magic Eraser to go to town on toilet bowl stains. Some users even recommend cutting a piece off and letting it dissolve the bowl to remove that unsightly ring all on its own.

What is the best toilet limescale remover?

Pour about one cup of white vinegar into the toilet bowl, followed by about one cup of baking soda, then let it rest for around 10 minutes. It's a good idea to wear gloves when using this as a toilet cleaner and to have eye protection.

Can I leave vinegar in toilet overnight?

Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight. The next morning, sprinkle a little baking soda into the bowl, scrub, and then flush clean.

How do you remove thick limescale from the bottom of a toilet?

For this cleaning task, the more, the merrier, pour vinegar (about 1 litre) and a few cups of bicarb will work fine. Give the solution a mix until you have a paste. Then, add it to the toilet bowl and leave it to soak for as long as possible, at least an hour.

What cleans thick limescale from toilets?

For a more heavy-duty approach, you can pour an entire bottle of white vinegar over and around the bowl, remembering to cover all of it. Then, leave the vinegar to work for a few hours or overnight. Use your toilet brush to scrub any leftover limescale deposits away the next day.

Can you leave baking soda and vinegar in toilet overnight?

If the clog still seems to be intact, start over at step 1 and repeat the process a couple of times. For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging.

What are brown hard stains in toilet?

The contaminants notorious for causing brown stains in toilet bowls are iron, manganese and sulfur. These pollutants can also produce iron bacteria, manganese bacteria and sulfur bacteria, which also can produce brown stains.

Will bleach get rid of brown stains in toilet?

Simply sprinkle baking soda on the stains and scrub with a brush. Use bleach: Bleach is a powerful cleaning agent that can quickly remove stains. However, it should be used sparingly as it can damage the porcelain on toilet bowls. Apply bleach to the stains and let it sit for several minutes before rinsing away.

Previous article
Can you use a jumbo wax ring on a toilet?
Next article
What is the golden rule for toilet cleaning?