There are a number of reasons why your air conditioner might be running but not cooling. It could be an issue with the thermostat, the compressor, or the evaporator coils. Or, it could simply be clogged with dust and debris, which is preventing it from working properly.
If your AC is running but not cooling, it could be due to a dirty air filter, incorrect thermostat settings, a malfunctioning thermostat, a refrigerant leak, dirty condenser coils, blocked vents or ducts, a faulty compressor, frozen evaporator coils, or electrical issues.
Clean your Air Filters, Vents, and Ducts – A clogged air filter will struggle to meet the thermostat's set temperature since the dirt and debris buildup prevents air from circulating through the vents. And as airflow into living spaces drops, so do comfort levels.
Some of the most common thermostat issues include:
The thermostat is broken, not properly level, or dusty. The thermostat needs to be recalibrated. There is loose wiring causing a thermostat issue.
Your AC might not cool properly due to thermostat issues, an undersized unit, or extremely high outdoor temps—so check those first. Keep an eye on airflow—replace clogged filters every 3 months, and make sure vents and ducts aren't blocked for efficient cooling.
One possible reason your AC is not reaching the set temperature is that the thermostat could be dirty. If dirt, dust, or other debris has accumulated within the thermostat box, it can cause the wires to heat up or other issues. Thermostats are cleaned during routine HVAC maintenance to help prevent this from happening.
For many of us, 70 degrees is the ideal indoor temperature, but when it is close to 100 degrees outside, your AC unit will be working quite hard to meet these expectations. Consider setting your thermostat at 75 degrees to 80 degrees in your home if the outside temperature is approaching triple digits.
Slow hot water recovery can be an indication of a faulty lower thermostat. If the water is too hot, it is likely that one or both of the water heater thermostats are set too high.
Another problem that can cause your house to be hotter than what you've set the thermostat to is if your home's HVAC system isn't sized properly. An HVAC system that's too large for your house will cool your home unevenly. It will only cool some rooms off and then shut off versus cooling down the entire house.
A bad thermostat can be detected when your AC or furnace is not turning on, your HVAC systems are not turning off, the thermostat not responding, your HVAC system is short-cycling, the room temperature not matching the temperature displayed on the thermostat, and the programmed setting resetting themselves.
If your AC is not cooling your home (but is still blowing cool air through the vents), one of the primary culprits is that your house has insufficient insulation and air leaks. Faulty insulation and air leaks are one of the biggest causes of your home being able to stay cool in the summer.
Locate the sensor, which is a small, round component usually positioned near the bottom of the thermostat. It may be labeled as “sensor” or “thermistor.” Using a soft brush or a can of compressed air, carefully clean the sensor to remove any dust or debris that may have accumulated on its surface.
Many factors can cause this issue, including clogged filters, refrigerant leaks and the wrong unit size. While it's possible to troubleshoot it yourself, it is best to contact an HVAC professional for your AC problems.
Power down your AC: Turn off your AC unit and unplug it from the power source. This will ensure that you stay safe while working on the unit. Locate the reset button: Most air conditioning units have a reset button located near the outside unit. It is usually a small button located inside a small hole.
There are a number of reasons why your air conditioner might be running but not cooling. It could be an issue with the thermostat, the compressor, or the evaporator coils. Or, it could simply be clogged with dust and debris, which is preventing it from working properly.
A Malfunctioning Fan
A dysfunctional fan can be why your thermostat won't change temperature. This problem prevents the furnace system from forcing heated air into your home. Solution: switch off the furnace, wait two minutes, then switch off the fan.
To reset mechanical thermostats, simply turn off the thermostat and flip the circuit breaker. This can be done by going to the breaker panel and turning off the appropriate breaker switch for 30 seconds. After turning the breaker back on, turn the thermostat back on and the thermostat should be reset.
One easy thing you can do to check the accuracy of your thermostat is to do a temperature check. See what your thermostat reads. Then use a portable indoor thermometer to compare the temps. Another good way to do the temperature check is to download one of the many free apps that allow you to check indoor temperatures.
P0128 is an extension of OBD-II code P0 which indicates a problem with your car's coolant thermostat.
On average, an air conditioner running in good condition should take about 15-20 minutes to drop the temperature by 1 degree in a standard-sized room. However, factors like outside temperature, unit size, and insulation quality can affect this timing.
Just because the outdoor temperature is above 100, the Ideal temperature to set your AC unit to doesn't change — it's 78 degrees. Higher temperatures in the home are to be expected when the weather is hotter than usual, but your thermostat can still be set the same as if it were a lower temperature outside.
Cooling a house from 80 to 72 degrees is a common goal for many, especially during the peak of summer. On average, this process takes roughly two and a half to three and a half hours.