Laminate flooring typically bubbles because of moisture damage, trapped air pockets during installation, or because the planks were installed too tightly and have no room to expand.
To fix swollen laminate flooring, first eliminate the moisture source and thoroughly dry the area with a dehumidifier and fans. For minor swelling, apply a heavy weight or warm, localized heat. For severely warped or buckled planks, the only permanent solution is to cut them out and replace them.
Apply weight to the floor: Once the area has started to dry, place heavy items, such as books, on top of the affiliated planks. This will help flatten them back into place while they dry. Apply heat to the planks: For planks that are still swollen, apply heat to the floor.
Laminate floor swelling sometimes recedes if the damage is minor or caught early. However, because standard laminate has a fiberboard core, severe water damage often causes permanent deformation.
Buckled floors can sometimes go back down if the damage is minor and moisture issues are addressed immediately. However, depending on the severity of the swelling and the flooring material, the boards may permanently warp, cup, or require replacement.
It looks like a little hill running down each board. Buckling is the scary one. Your floor actually pulls away from what's underneath. Boards lift up.
Can swollen or warped wood floors be fixed? Yes, many can be saved, but it depends on the severity and how quickly you act. For minor cupping, professional drying is often enough to return boards to normal, sometimes with weights to help them flatten.
Laminate flooring typically lasts 15 to 25 years. High-quality, properly maintained planks can even exceed 30 years, whereas lower-end or neglected options may only last 10 to 15 years.
If the swelling is caused by high humidity or moisture buildup, you can use a damp cloth or vacuum cleaner to remove any excess water or moisture. Be sure to use a cloth that is only slightly damp, as excessive moisture can cause the flooring to swell further.
Make sure the swollen laminate is completely dry (use a dehumidifier if needed) Cover any minor laminate bubbles with a damp cloth and use a knife to cut a slit in the area. Apply wood glue into the slit and press the veneer down - use a heavy object to weigh it down and leave it for 8-12 hours to dry.
While vinegar is a popular DIY cleaning solution, it's not recommended for laminate floors. Its acidic nature can dull the laminate's finish over time. Instead, opt for a pH-neutral cleaner specifically designed for laminate flooring to ensure it remains vibrant and undamaged.
If the laminate floor feels uneven or bouncy, it might be because the subfloor is uneven. Fix any subfloor problems using a levelling compound or other levelling method before reinstalling the laminate. For really damaged planks, the best solution is to replace them.
General Guidance for Repairing Swollen Laminate Flooring
Use wood glue or caulk to fill any expansion gaps: if there are any gaps between the laminate flooring planks, only a small amount of wood glue or caulk is needed to provide a barrier against water seeping into the seams.
A bulging or buckling floor is almost always caused by excess moisture combined with improper installation. Wood and laminate materials are highly porous; when they absorb water, they expand, and if there is no room to grow, they pop upward to relieve the pressure.
In 2026, flooring trends revolve around warmth and natural textures, with cool, flat grays officially on their way out. The most popular colors include:
Laminate floor swelling sometimes recedes if the damage is minor or caught early. However, because standard laminate has a fiberboard core, severe water damage often causes permanent deformation.
The "Rule of 3" in flooring is a design principle that recommends using no more than three distinct flooring materials or color variations throughout your entire home. Limiting your design to three elements creates visual cohesion, prevents a chopped-up layout, and ensures smooth, intentional transitions from room to room.
You can fix warped laminate flooring by identifying the root cause. If the damage is caused by a lack of expansion gaps, trim the edges. If the warping is minor, you can try drying the floor and weighing it down, but if the boards are severely swollen from water damage, you must replace the damaged planks.
Buckling laminate flooring is usually caused by trapped moisture or a lack of room to expand. To fix it, remove the baseboards, trim the edges of the floor to create an expansion gap of about 0.6 cm (or 14one-fourth14 inch), and allow the floor to flatten out.
A floor is at risk of collapsing when you notice severe, localized sagging, excessively spongy or bouncy spots, sudden cracking or popping sounds underfoot, or visible rotting and water damage in the support beams.
Warped floors can sometimes return to normal, but it entirely depends on the flooring material and the severity of the damage. Real hardwood can often flatten out once dried, but laminate, engineered wood, and severely warped or buckled planks will likely need to be replaced.
Bubbles in laminate are typically caused by trapped air, excess moisture, or heat damage. Fixing the issue depends on whether you are dealing with laminate flooring or laminate furniture. Here is how to repair the most common types of laminate bubbles:
Laminate flooring typically bubbles because of moisture damage, trapped air pockets during installation, or because the planks were installed too tightly and have no room to expand.
Whether you can put laminate over laminate depends entirely on what you are laminating.