Why does my thermostat say hold? Simply put, it's your device's way of maintaining a set temperature outside of its programmed schedule. Whether due to a Temporary Hold or a Permanent Hold, this function can affect the comfort of your space and your energy use.
Both features can allow you to save money on your energy bill. For example, the “hold” button can help you set the temperature to an energy-efficient level if you're out of the house for a few hours. On the other hand, the “run” button allows you to ensure that your scheduled temperatures remain energy-efficient.
OK look. Hold means that the thermostat will obey to your command and you are in full control. It means it is not respecting any schedules or programs. To remove hold, you just have to run a schedule.
Remove the temporary hold: Once you have found the current temperature setting, you should see an indicator that shows a temporary hold or override. This indicator may be a flame symbol or a clock symbol with a plus or minus sign. Press the appropriate button or use the arrows to remove the temporary hold.
The 'Hold' setting will maintain the desired temperature until the next scheduled program kicks in or until you manually turn it off.
By pressing “Hold”, your thermostat will lock in the temperature it's currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming.
Correct Holding Temperature
Keep hot foods hot and cold foods cold. Hot foods should be kept at 135° F (57.2° C) or above. Cold foods should be kept at 41° F (5° C) or below.
If your thermostat is on a hold setting and you wish to remove the hold, simply check for “Cancel,” “Run,” or “Run Schedule.” Depending on your thermostat model, the specific run button you need will be labeled differently.
A Hold message on a Honeywell Thermostat tells the thermostat to maintain the HVAC system for the building at a set temperature. The temperature will be maintained until the Hold expires or the temperature is manually changed. A Hold can be temporary or permanent depending on its setting.
Some of the most common thermostat issues include:
The thermostat is broken, not properly level, or dusty. The thermostat needs to be recalibrated. There is loose wiring causing a thermostat issue.
From the XL Wireless Thermostat
If schedules are enabled, you should have an On/Off toggle in the lower right corner of the screen. Set it to On to activate Permanent Hold and set it to Off to run the schedule.
Although there might be slight differences depending on the manufacturer, in general the “hold” button is used to lock in a specific temperature, regardless of whatever program you might have set for your system. For instance, you might have your furnace set to keep your house at 68 degrees during the winter.
You'll want to have your thermostat set to heat mode in the wintertime and air conditioner auto mode in the summertime. In order for your system to run on auto mode, you'll need to have either the heat mode or cool mode on. This way, your thermostat knows whether to turn on the furnace or the air conditioner modes.
Choose "AUTO" for energy savings and "ON" if you want constant air circulation or improved air filtration. Temperatures can soar or plummet depending on the time of year. Throughout the year, it is important to have reliable heating and cooling systems in order to keep your home supplied with cool or warm air.
Leaving town for a long period of time: If you won't be home for some time but want to keep your temperature at a steady, moderately high temperature, you can increase your thermostat by 7-10 degrees Fahrenheit. Then, press “HOLD” to lock that temperature in until you return.
When your thermostat says “hold,” it simply means that the hold function is active and the current system temperature will be maintained until you change it or the hold expires. However, in some cases, thermostats remain stuck on hold no matter what you do.
There are a number of reasons why your AC unit may stop working unexpectedly, including electrical problems, blockages, thermostat issues, and more. Troubleshooting includes checking your circuit breakers, thermostat settings, and replacing your air filters.
and select the Permanent Hold button. It will then display ON, and the control will. maintain that temperature setpoint until you manually change it. Select the Permanent. Hold button again to turn Permanent Hold OFF.
The temporary hold setting is when you change the temperature setting to a different temperature and it stays at that setting until the next schedule change. The permanent hold setting holds the temperature setting you have chosen for an indefinite time. This overrides your scheduled settings.
An oven's temperature preset for its keep warm setting typically falls between 170°F and 200°F, but some ovens, like select KitchenAid® wall ovens and ranges, let you customize the temperature within a specified range for more control.
According to the Department of Energy1, 78° Fahrenheit is the sweet spot for air conditioners to balance energy savings and comfort when people are at home and need cooling.