Algae growth can transform a clear, inviting swimming pool into one with an unwelcome green tint. While algae spores continuously enter outdoor pools, regular maintenance and care keeps these spores under control and helps to prevent a full-blown algae bloom, which can turn your pool water green in just a few days.
When there is not enough chlorine in your pool water, green algae—which can float freely or attach to the walls and floor of your pool—can grow. Thus, in many cases, the most efficient way to get rid of algae is by shocking your pool water with chlorine.
The free chlorine levels might be low.
But be careful—adding too much chlorine in pool water can cause those metals to oxidize and turn the pool a different shade of green.
Pool water turns green because of algae in the water. Algae can grow rapidly, particularly when it's warm like Summer, which is why it can surprise you overnight. This generally comes down to an imbalance or lack of chlorine in the water.
So the best way to have a crystal clear pool is prevention.
Check the flow meter to be sure the pool is circulating water at a proper flow rate. Brush the walls and floor weekly. Keep a preventative amount of algaecide in the pool. Most often added weekly.
Baking Soda and Green, Blue, or Yellow Algae
You'll need to use an algaecide to kill the algae and superchlorinate your pool to clear the water. After this treatment, test your pH and alkalinity and add baking soda to raise alkalinity to at least 100 ppm and pH to between 7.2 and 7.8.
The most common reason pool water turns green is due to algae growing in the water. Algae can grow rapidly, particularly in hot weather, which is why it can surprise you overnight during the warmer months. This generally comes down to an imbalance or lack of chlorine in the water.
While the green algae aren't harmful, the bacteria that feed on the algae can cause issues. When you swim in green water, you expose yourself to algae that host bacteria. Swimming in green water could cause bacterial infections on your skin, and you could get sick if you ingest algae-filled pool water.
The fastest way to clean a green pool is by using pool chemicals and your pool filter. This process usually takes around 4-5 days but you will start noticing a major improvement after 24 hours.
Clorox itself recommends using between 100 and 200 ounces of regular-strength bleach per 10,000 gallons of pool water -- one gallon is 128 ounces, and many bottles of bleach are available in one-gallon or half-gallon sizes. Pool professionals tend to recommend more conservative amounts of bleach.
Just like you run vinegar through your coffee pot to get rid of calcium buildup, white vinegar can wipe away this eyesore in your pool. Mix a 50/50 solution of vinegar and water, dip a sponge or soft cloth into it, and scrub that residue away.
It is important to know what exactly bleach is before you put it in your pool. Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine.
Baking soda can work wonders in a pool. Baking soda can: Help to clear cloudy water and restore the sparkle. Spot-treat algae.
The presence of too much algaecide can lead to a foamy pool water. Small bubbles will begin to be produced as the water is pushed through the return jet and back into the pool. Do not confuse these bubbles and foam with another common problem, which is air in your pool lines.
ADD POOL CLARIFIER
The change in your pool water colour means that you have successfully eliminated the algae and can now clean it out of your pool. If your water is still green, wait another 24 hours and redo the steps from Days 1 and 2.
Algaecide will be able to help you clear cloudy green pool water such as this. Algaecide, to put it simply, is a pool chemical that can kill algae or prevent it from growing in your pool.
Light Green or Teal Pool Water:
This means there's a low amount of algae in your water and you won't have to use a hefty amount of chlorine shock. In this case, you should double shock your swimming pool water. To double shock, you will need to add 2 pounds for every 10,000 gallons of water.
(1 bag) of shock per 10,000 gallons of pool water. That may be fine for normal conditions, but if you have a severe algae attack, a triple shock is needed. 1 bag will get reach 7-9 ppm, but for 30 ppm, you need 3, 4 or sometimes even 5+ lbs per 10,000 gallons of pool water.
The pool turned green from copper, not algae
Think of the Statue of Liberty. It is made of copper, and has turned green over time through oxidation.
Low flow = poor circulation which will lead to algae in the pool. Bottom line, the filter must be backwashed on a regular basis to ensure that your pool water is clear. "When do we need to backwash?" - It is recommended to backwash your filter once every 4-6 weeks of regular use.