There are four energy saving set-backs/set-ups under ENERGY STAR which are defined as “wake,” “leave,” “return,” and “sleep.” Wake: The time period when the user rises in the morning. Leave: The time period where the dwelling is unoccupied during the day hours.
To permanently ignore the schedule, press up or down until the desired temperature is displayed. Then, press the Hold button to maintain the new temperature indefinitely. The word Hold will appear on the screen. Press the Run button if you wish to cancel either override and resume the schedule.
Most Honeywell thermostats blink when in a time delay for the cooling (or heating if it's a heat pump) this time delay feature protects the compressor form cranking too soon following a short off cycle or a power outage. The cool on, heat on, snowflake or flame icon will be blinking if this is the case.
Remove the temporary hold: Once you have found the current temperature setting, you should see an indicator that shows a temporary hold or override. This indicator may be a flame symbol or a clock symbol with a plus or minus sign. Press the appropriate button or use the arrows to remove the temporary hold.
By pressing “Hold”, your thermostat will lock in the temperature it's currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming. Convenient, right?
Wake: The time period when the user rises in the morning. • Leave: The time period where the dwelling is unoccupied during the day hours. • Return: The time period where the user returns at night.
The best way to save money is by combining both. The “run” feature lets you preset the temperature when you're not home to prevent wasting money on cooling or heating an empty home. Meanwhile, the “hold” button lets you change the room's temperature without changing your energy-saving, preset schedule.
The Permanent Hold feature keeps your home's temperature at the same temperature indefinitely until you manually cancel it. If you can't reprogram your thermostat's temperature, this is likely the cause. You should be back on your programmed schedule as soon as you cancel it.
Access the Menu: Tap the menu icon on the thermostat's touch screen. Hold Down the Weather Button: Press and hold the weather button for five seconds. This will bring up the reset menu. Select Reset Option: Navigate through the options until you find “Factory Reset.” Tap on it to select it.
A Hold message on a Honeywell Thermostat tells the thermostat to maintain the HVAC system for the building at a set temperature. The temperature will be maintained until the Hold expires or the temperature is manually changed. A Hold can be temporary or permanent depending on its setting.
First, check your filters and coils for dirt and debris that may be impeding airflow. Once you've cleaned the filters and coils, run the air conditioner with just the fan so that the ice accumulation can melt off. If the AC still doesn't blow cold air, it could be that refrigerant levels are too low.
Common issues with the thermostat include the power source and the wiring. If your thermostat works on batteries or is attached to a circuit breaker, checking these may be your first step. Your wiring connections may also have degraded or worn down, requiring a professional to fix them.
Simply put, it's your device's way of maintaining a set temperature outside of its programmed schedule. Whether due to a Temporary Hold or a Permanent Hold, this function can affect the comfort of your space and your energy use.
If you have a manual thermostat, setting the temperature on your Honeywell thermostat is simple. All you need to do is to press the up and down buttons to set the temperature. The temperature you set will stay until you change the temperature again.
The Short Answer Is: When your air conditioning system keeps running and never seems to shut off, the problem could be linked to a number of malfunctioning components – frozen evaporator coils, a clogged air filter, a bad electrical relay switch that needs to be replaced, the fan blowing constantly, dirty condenser ...
The blinking 'Cool On' message can indicate one of two things: the compressor protection feature or a startup delay after power loss.
Turn your thermostat “off”, then flip the related circuit breaker “off”. Wait 30 seconds, then turn the breaker back “on,” then the thermostat. Set the thermostat to hot or cold, whichever you prefer, and your desired temperature. This should effectively reset it.
Find the breaker to your HVAC system, flipping it 'off'. Make sure the breaker is flipped all the way 'off,' then wait for 30-seconds. Turn the breaker back 'on. ' Return to the thermostat control panel and flip the thermostat back into the 'on' position.
For the Honeywell Home app: Select the thermostat, press the Schedule icon, choose Options, then Turn Schedule Off. For the 8000 series thermostat: Press the "Sched" button, select "Edit," choose the days and period to clear, then select Cancel Period to clear the schedule.
So if you know you are going to be home for the day, you can press the hold button in the morning and keep your home comfortable all day long. As soon as you want your home to go back to its normal programmed settings, you simply hit the “run” setting and everything will go back to normal.
Using the “hold” function on your system means you can suspend the program if you'll be away from home for a while, such as while you're on vacation. This means you can tell your HVAC to stay put at a specific temperature to keep your pipes from freezing in winter but as warm as you want it to be for comfort.
Choose "AUTO" for energy savings and "ON" if you want constant air circulation or improved air filtration. Temperatures can soar or plummet depending on the time of year. Throughout the year, it is important to have reliable heating and cooling systems in order to keep your home supplied with cool or warm air.