Poor ventilation can cause the heat to build up to the point that the oven overheats and causes the thermostat to trip, again cutting out your oven in the process. This can be a common issue for new installations and can be a fundamental issue with the oven cavity itself.
Check Ventilation: Ensure that the vents and fans are not obstructed, allowing proper airflow. Reduce Cooking Time: Try reducing the cooking temperature or time for the dish you're preparing. A malfunctioning thermostat can also lead to oven shutdowns.
If you're experiencing this, it's likely due to a bad connection or a malfunctioning switch. You can try replacing the burner or calling a technician to check out the problem.
Overheating: The oven may have a safety feature that turns it off if it overheats. This could be due to a malfunctioning thermostat or a blocked air vent.
The problem could be either the oven or the wiring. The oven could be using more amperage than the circuit breaker is rated for, and thus tripping the breaker. Or, the problem could be with the wiring (for example, damaged insulation causing unwanted current in the wire), or the circuit breaker could be failing.
If the oven is receiving power, various issues could be preventing it from turning on. Common electric oven problems include a broken wire; a bad control, a bake, or broil element; or the wrong amount of power coming to the unit. Common gas oven problems include a faulty gas control, igniter, or valve.
Unplug all appliances on that problem circuit and switch off any immersion heaters (if you have one). Switch the tripped switch to the ON position and plug in the appliances one by one until the trip goes again. Leave that appliance unplugged, and have it repaired by a qualified electrician.
Many ovens and ranges with touch pad clock controls will automatically shut off after 12 hours. The benefit of this is the peace-of-mind and energy savings if the oven is accidentally left on. Models with no clock or timer do not have automatic shutdown.
The possible reasons your oven is not working may include a broken baking or broiling element, a malfunctioning spark element (spark electrode), a broken igniter, a blown fuse, an issue with the control board, or outlets not providing enough power to the oven.
It is normal for the surface burners on an Electric Range or Cooktop to cycle on and off. This is true for electric coil burners as well as radiant burners on a smooth glass cooking surface. This is done to maintain an even temperature at the heat selection that has been chosen.
Depending on power setting and number of burners in use, burners on an Electric Cooktop may shut off as a precaution to avoid overheating. Turn the home circuit breaker to the unit off for 30 seconds and back on again. Retest the unit operation.
Electric Oven Making a Clicking Noise
While it's more common for gas ovens to make clicking noises, electric ovens can sometimes too. If your electric oven is making a clicking noise, it's likely due to a faulty relay board or heating element. In both cases, the component will likely need to be replaced.
Turn the circuit breaker to the OFF position or remove the fuse. Wait one minute, then turn the circuit breaker back to the ON position or install the fuse to reset power to the appliance. This should reset the electronic controls on the Range or Wall Oven.
GE Range/Stove/Oven Relay Board
The relay board has several relays which control the electrical current to the heating element, and other components of the stove. If one or more of the relays on the relay board has failed, the oven may shut off. If the relay board is defective, replace it.
Frigidaire Range/Stove/Oven Oven Control Board
The oven control board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.
Make sure to clean it and the surrounding area thoroughly to prevent the accumulation of dust and debris that can clog air vents and cause overheating. Another common cause of oven shut-offs is a faulty or improperly closed door.
A broken electric oven thermostat is most likely the cause of your electric oven's temperature fluctuation. Your oven thermostat is the oven part which regulates the temperature. If the thermostat is broken, it will no longer be able to keep the temperature at a stable level and will cause fluctuation.
On average, you can expect your electric oven to last 13 years, these days, and your gas oven to last 15. But, like anything else, the more you use it, the quicker it will wear out. Daily use for a family of five will wear an oven out faster than just heating up a frozen pizza a couple of times a month.
The heat coming from an oven left on for prolonged times can also cause damage to temperature dials and other items nearby. The damage to temperature dials can lead to electrical malfunctions, challenge the oven to work effectively, or, even worse, a fire.
An electric oven lifespan typically ranges from 13 to 15 years, provided it's well-maintained. By comparison, gas ovens tend to last slightly longer—about 15 to 17 years—due to their simpler mechanisms.
Turn your oven to low temperature (approximately 50°C) to dry out the moisture. Gradually increase the temperature when it reaches 50°C. If you rarely use your oven, repeat steps 2 - 3 at least once a month to prevent future oven power trips.
Some of the most common reasons which might cause a trip switch to operate: There are too many fittings or appliances on a circuit and it has been overloaded. An appliance is faulty or has not been used correctly, for example a kettle has been overfilled or a toaster not cleaned of crumbs.
If your electric oven keeps tripping, the most likely culprit is the circuit. Unfortunately, the complexity of oven circuits will more than likely mean you will need an expert technician. The technician will unplug any other appliances connected to the same circuit as the oven. This should stop the oven from tripping.