It costs a lot of money to have sales people to go to all the different pool store chains that must be covered in the bulb price. You aren't paying for a better bulb, you are paying for expensive overhead and multiple mouths to feed when each bulb is sold.
An LED light will save you roughly 75% on your energy usage compared to a comparable incandescent light. REMEMBER, that LED pool lights cost more, on average, than a simple incandescent light so your cost savings will not start till you recoup the additional money that you spent on the LED lights.
A pool light bulb retails for about $30-40. A new pool light gasket for the fixture is about $25. Labor for the repair would be $100-150. Profit on a successful job would be about $120.
Pool lights are worth it because they provide the necessary lighting for a pool especially during the night, which prevents accidents because you can see every area of your pool. Moreover, they are considered a necessity most especially if you want to get maximum usage out of your pool.
At the time of this writing, full size LED pool lights, like what are typically installed in vinyl liner or concrete pools, usually cost between $1,000 and $1,500 installed. The smaller LED lights like the Pentair Globrite or PAL 2000 typically cost between $700 and $900 installed.
You can get electrocuted by a pool light in a swimming pool. It can cause serious injury and even death. An experienced electrocution lawyer can help victims and families recover the pain and suffering compensation or wrongful death damages they are entitled to under the law.
Your pool lighting should give you few problems overall. Most incandescent bulbs will burn for 1,000 hours before bulb replacement is necessary. LED bulbs can burn for 25 years or more (or so they tell us).
The ideal way to illuminate your pool is by using LED pool lights. These lights, in general, are necessary so you can enjoy your pool anytime - even at night. That's because LED lights give an extra layer of protection that ensures your safety while swimming in your pool.
The Most Energy-Efficient Lighting Available
Since there is no filament, an LED does not heat up the way an incandescent bulb does, which wastes up to 80% of the electricity routed to it to produce heat rather than light.
Water inside the Pool Light? If there is water inside the lens of the pool light, which you can usually see from on-deck, that doesn't mean that the light is leaking, but it does mean that the lamp gasket has failed, letting water leak inside and surround the bulb.
Pull the pool light housing from the side of the pool. The housing has a long, waterproof cord attached to it, so you can replace the light from outside the water.
Just like any light, the bulb can burn out and will need to be replaced. There is no need to lower the water level in your pool to replace the burned-out bulb.
Swimming pools and spa's always need 12 Volts of AC power. Most people hear 12 Volts and immediately think of DC which is used in cars and also outside landscape lighting. If you hook pool LED's to 12V DC, sometimes they work, but not correctly.
The number of lights you need depends on the size of your swimming pool. 15' x 30' pools only require one light. 20' x 40' pools require two lights. 20' x 42' pools and up require three or more lights.
Owning a pool can cost you a pretty penny. In 2018, in the United States, pool maintenance cost an average of $190 per month. Why not save money every way you can? Thanks to a much lower average wattage, an LED pool light costs only pennies a day to operate, while an incandescent bulb can cost up to $1 a day.
Longer Lasting: While a halogen light has a life between 1,500-5,000 hours, an LED pool light can last over 30,000 hours with some companies claiming up to 50,000 hours. Less Maintenance: A longer lifespan means that you spend less time changing the bulbs.
LED bulbs can run off of 37 watts. This can be compared to incandescent bulbs, that require 161 watts to reach the same output.
Check the back of the light housing where the cord connects into the light, there will be a label specification of your light. The brightness of a 12V and 120V will be the same.
Loose pool lights are dangerous. Pool lights that are not properly installed into the pool can send electricity directly through the water. When this happens, it can shock those who are swimming in the pool.
How to test pool water for electricity? One way to test pool water for electricity is to use a device called shock alert. It will notify you if there is electricity present in the water. If it beeps and flashes red, it means there is a presence of electricity in the water and you should not swim in it.
If your pool is correctly lit, you do not need to add other lights directly around the pool. Stylish and convenient, we recommend the creation of a light path to access your swimming pool. Recessed lights are ideal to create an external atmosphere.
If the bulb tests well (3-20 ohms) the fixture is probably bad. Try a new bulb without closing the fixture. It probably will not light, and the fixture will have to be replaced. If the bulb tests poorly (overflow, open, no continuity, infinite ohms), the light most likely will work fine with a new bulb and gasket.
How long does the light last? The life expectancy for a Colorlogic light is 50,000 hours. The light will perform for over 10,000 hours without any noticeable loss of brightness.
Dead Bulb. If your pool light bulb is flickering or turned off and the housing is still dry, it may be that the bulb just needs replacing. Be careful, though, because if the bulb isn't lasting as long as it should that is an indicator of a much worse problem such as a power surge or some faulty wiring somewhere.