It can be caused by the cleaning chemicals you are using, nature and bad ventilation in the air. Having a daily cleaning routine can be helpful to make your floors look cleaner, and it's important to use the right cleaning products that aren't going to leave residues or films on the floor.
Soap only lifts dirt and oil into water, making them suspend in water. Therefore, the more soap you use, the more your mop gets saturated with dirt. So, if you do not remove all the soapy water from the floor, the dirt remains, forming streaks on the floor.
Floors can look or feel dirty for a number of reasons. Dirty hard surface floors are usually caused by the environment, an overuse of chemicals, and a large volume of traffic. Fortunately, there are many things you can do to keep your floor looking and feeling cleaner for longer.
Because of laminate's nature, the flooring can collect dirt that sticks to the surface. This can lead to laminate floors turning feet black. This is particularly true in rooms where there are lots of outdoor shoes moving in and out and over the floors, leaving behind debris.
2 REASONS YOUR FLOORS ARE STILL DIRTY AFTER CLEANING
Many cleaners spray a ton of floor soap, believing "wet equals clean". Thinking that wet equals clean, they then forget to rinse out their mop pad, resulting in a mop pad that is fully saturated with dirty water.
Feet can be bacteria magnets. With 250,000 sweat glands, they produce around a half pint of perspiration each day. That's a lot of sweat swamping around those feet. If you live in a humid climate and do a lot of walking, particularly in sandals, your feet might also be picking up a lot of dirt and general street stuff.
Vacuum, dust or wipe with a lightly dampened mop – never use soap-based detergents, as they can leave a dull film on the floor, and avoid over-wetting. Don't use wax polish either, as this will make the floor slippery. To remove marks and stains, use a dilute solution of water and vinegar.
According to the NWFA you should use a dust mop or broom every day to clean the dust and grime from your wood flooring. Once a week use a vacuum set on the wood or bare floor setting to clean out dust from the cracks and gaps in the flooring. sealant used on hardwood flooring.
Any vacuum can clean hardwood floors—this is the simplest possible task for a vacuum cleaner. You don't need anything special to get dust, hair, crumbs, or anything else off your wood, tile, or laminate floors.
In high-traffic areas, like the dining room and kitchen, sweep or vacuum daily if possible and mop hardwood floors once or twice a week. Mop less-trafficked areas once a month or once a season.
Whether you're cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors.
Pine Sol is good for cleaning hardwood floors but only if they are finished or sealed with a protective coat. It's safe to use even on engineered wood floors but can cause damage if the floor is worn out, oiled, or waxed. Rinse well when cleaning with Pine Sol to prevent leaving residue on the floor.
Ammonia. Ammonia is a pungent chemical that has many cleaning uses in your home, but it should never be used on hardwood floors. “The ingredient damages the surface and dissolves the lignin in the wood,” explains Leanne Stapf, chief operating officer at The Cleaning Authority.
The best way to clean hardwood floors is to adopt a regular routine. Use a broom or hardwood floor mop for cleaning wood floors daily. A microfiber dust mop pre-treated with a dusting agent will pick up dust and dirt and prevent scratches. Vacuum your hardwood floor once a week.
Traditional damp mopping remains the best way to clean many types of flooring. While flat mops like Swiffers are great for daily cleanup of dust and light soil, only a good, thorough weekly damp mopping with a proper cleaning solution can really provide the deep-down cleaning a floor needs.
Give floors a good wash or steam once every couple of weeks, says Tetro. You might want to wash your kitchen floors a little more often, due to food bacteria that can spread around.
These cells carry some red pigment that, over time, may turn black in color. When these cells end up in your feet, they may contribute to the darker skin color. While an abundance of red blood cells may cause your feet to change color, lack of blood flow may also affect the appearance of your feet.
Maintain body temperature
The feet are attached to the elements of fire. Wearing footwear generates heat in the closed area throughout the day. But taking off the shoes gives comfort to the feet and immediately the heat is released. Washing feet before going to bed gives them relief and leads to better sleep.
You can safely use Swiffer products on hardwood floors. For a quick clean, try Swiffer WetJet Wood Starter Kit. With just the right amount of solution, it breaks up tough, sticky messes, brings out the natural beauty of your floors and won't damage them.
Although it may be tempting to deep clean your hardwood floors with a steam mop, don't. “Drastic temperature changes and moisture may warp the wood,” says Steve Stocki, manager of marketing and merchandising at Lumber Liquidators. That's true whether you have solid or engineered wood floors, and for bamboo, too.
An alternative natural cleaning solution is warm water and dish soap (1/4 cup of dish washing liquid for a bucket of warm water). For spot cleaning needs, sprinkle baking soda on the affected area and scrub with a sponge. To ensure the area is thoroughly clean, rinse with warm water and dry.