Inadequate mixing of the concrete, with excess clay or silt in the mixture. Insufficient curing and sealing at the surface; if the concrete is not cured and sealed properly, moisture, oil and / or grease will slowly disintegrate the concrete therefore producing dust.
The easy and best way to prevent the surface from getting dirty repeatedly is to seal the concrete.
A main cause of concrete dusting is troweling concrete with bleed water and mixing the excess water back into the surface. Other causes include water exposure during finishing, a weak cement content, curing issues and temperature issues.
Our concrete surfaces catch wet leaves and storm debris, grease, and oil from vehicles, and are susceptible to mold, mildew, and bacterial growth. You can clean and clean your outdoor surfaces, but if your concrete sidewalks and driveways are dirty, it can make the entire property feel dirty.
Mopping with dirty water usually causes that buildup and dirty appearance, even though it was just mopped. Dirt is added to a mop bucket each time the mop is dunked into the water, if you don't change the water you are just transferring the dirt and grime around the floors through the dirty water.
Floors can look or feel dirty for a number of reasons. Dirty hard surface floors are usually caused by the environment, an overuse of chemicals, and a large volume of traffic. Fortunately, there are many things you can do to keep your floor looking and feeling cleaner for longer.
Reasons your hardwood floors are always dirty include cleaning product build-up, heavy foot traffic, pets, or poor air filtration. Sunlight, tracking in ice and salt, and dust can also leave floors dirty and dull. Dragging furniture, wearing shoes indoors and not cleaning them often are also causes.
Most sealed, polished, and painted concrete surfaces are very hardy and resistant to dirt. If your floors are particularly susceptible to developing a buildup from daily use, keep your concrete clean longer by sweeping them daily and planning for weekly cleanings with water and the cleaner of your choice.
Driveways and Sidewalks
If you don't have access to a pressure washer, you can use Super Clean, a hose and a garage broom to get similar results. Spray the area down with cold water, spray on some Super Clean and let it sit a few minutes. Work it into the concrete with the garage broom, and rinse with the hose.
Crystalline silica is found in materials. such as concrete, masonry and rock. When these mate- rials are made into a fine dust and suspended in the air, breathing in these fine particles can produce lung damage. Silicosis can be totally disabling and may lead to death.
Detergent or Dish Soap
Dish soap like Dawn and water has grease-cutting power, and it's safe and easy to use. This method works great for the entire floor before targeting specific areas with more powerful, stain-specific cleaners. Use soap and water on all concrete floors, but always rinse well.
If you find big-sized debris, you can handpick them before vacuuming or sweeping. Go over the floor again and sweep the floor, removing any loose dust particles and small size debris. After that, run a dust mop over the floor surface to clean and remove the fine dust particles and debris.
Use a detergent such as Dawn or Ajax dishwashing liquid mixed with water to brighten a concrete patio that hasn't been cleaned in a while. Use a detergent such as Dawn or Ajax dishwashing liquid mixed with water to brighten a concrete patio that hasn't been cleaned in a while.
Yes, vinegar is an excellent concrete cleaner. This solution can strip surface-level messes from concrete. Due to its acidic properties, vinegar can be a powerful tool for breaking down offensive materials such as dirt, stains, and bacteria.
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
To prevent surface damage to your concrete flooring, we recommend you dust mop daily with a clean, microfiber cloth pad. The use of dirty pads, or rough surfaces can damage the polished concrete surface of the floor. You don't want anything that will scratch or etch the surface of your floor when you're dusting.
For mopping, use warm water and a microfiber-style wet mop. Never use cleaners such as Pine-Sol, ammonia, vinegar, or bleach as they will dull, discolor or etch polished concrete and stained concrete floors. Ameripolish Rejuvenating Floor Cleaner is specifically designed for polished concrete.
Microfiber Mop: Microfiber mops are great for concrete floors as they are gentle on the surface and can effectively trap dirt and dust particles. They can also be used dry or dampened with water or a cleaning solution.
A pH-neutral cleaner is always a good option for a final cleanse or to routinely mop with. No matter what is used to clean, it's crucial to allow the unsealed concrete to fully dry.
High-traffic areas, like kitchens, bathrooms, hallways, and entryways, require weekly mopping. Infrequently used rooms, such as formal living areas or guest rooms, can be mopped every other week, or even once a month, so long as they're vacuumed once every seven days to remove dust and grit.
Even when your home is clean, clutter can make it look dirty. Clutter can be too much furniture, knick knacks on a shelf or counter, too many blankets and throws… you get the idea. Straighten these areas and really take a look at what you use and what you love.
In other words… it feels like a dirty house even after you have cleaned. Things like end tables, kitchen tables, and other tables in your home may look dirty because the finish is peeling off, there are water stains on the wood, or they are scratched and discolored.