Down (Rounded Side Facing In) This is the more commonly used position as it offers a great visual effect. In terms of practicality, it also allows more sunlight to stream in, as blinds turned in the down position have larger gaps.
Window blinds should typically be tilted down. Slats angled downward block the view from outside, allowing light to enter. This orientation helps prevent people from looking in, especially during the day. Tilting them up creates gaps, allowing outside visibility, reducing privacy.
It's a question we get asked all the time by customers looking to fit a blind: which way round should I install my roller blinds? Well, the solution is straightforward. Generally speaking, the roller blind fabric should be as close to the windowpane as possible.
The correct way to close blinds is to lower them down to your desired position, then rotate the slats into a downward position. This ensures that they are completely shut and will provide maximum privacy and darkness.
Sunshine in your home can help kill bacteria that live in the air, and spending time outside can help reduce respiratory issues. Science Daily published an article that suggests closing blinds during the day can suppress melatonin production and increase respiratory diseases.
Enhanced Room Darkening and Privacy
Turn your blinds up. This direction is better for improved privacy too, as minimized gaps between the slats don't allow curious passersby to view the inside of the house.
Which Way Should a Blackout Blind Face? A blackout blind should have the fabric of the roller hanging down at the back of the blind, or the side closest to the window. This positioning minimises light leakage and ensures a snug fit against the window frame, ensuring you get the most out of your blackout blind.
Privacy: When the vanes of vertical blinds are open 90 degrees, you can see outdoors and the outdoors can see in. For privacy, angle the vanes of these blinds at about 45 degrees or less, so if you are on one side of the blinds, you won't be seen.
Whether you can see through blinds depends on their type, material, and position. Horizontal blinds, when fully closed, offer high privacy, while tilted slats allow partial visibility. Vertical blinds also block the view effectively when closed but permit some visibility when slightly open.
The best way to make your blinds less see through is to eliminate the light gaps and layer your window treatments with a blackout fabric. You can also attach a privacy liner to your blind or shade to improve seclusion and block views from the outside.
I would suggest turning them both ways to see which option makes the room darker. If one way is darker, that way blocks more light and, therefore, also blocks more visibility. If it's about the same, the there isn't much difference.
When you want to keep cold or hot air at bay, and/or block light and views from outside (such as at night), turn the slats on your blinds so they face upwards and are fully closed. This way, the amount of gap between slats will be minimized.
Vertical blinds are great for covering large windows or sliding glass doors. They provide superior coverage and room darkening and can be adjusted to control the amount of light entering the room. Unlike horizontal blinds, vertical blinds will accumulate dust slowly because of the way the slats hang vertically.
Aid in Better Sleep
A dark room is key to getting a good night's sleep, and closing your blinds or curtains at night can help achieve that. Darkness prompts the body to produce melatonin, a hormone that regulates sleep cycles.
The brightest light and UV rays come in a downward angle directly from the sun. If your goal is controlling light but not closing your blinds completely, then the best option is to turn the slats up. Completely closing blinds in the upward position is also the preferred direction for the maximum room darkening effect.
Inside mount blinds are typically flush with the window's opening and don't cover the window trim. On the other hand, outside mount blinds and shades get installed outside the window frame.
Inside mounts are the most popular choice. They offer a clean, finished look because the blinds or shades are recessed and contained inside the window casing. Inside-mounted window treatments are NOT the best choice for you if: Your window frame is not deep.
The real answer is it's up to you, however the most common option is a back roll for face fit roller blinds and front roll for recess fit.
Black out linings can be sewn into a curtain like any other lining. You just need to remember to face the fabric side to the window and the coated side to the fabric.
Remember that upward facing blinds do best when you are “up” and awake during the daytime hours; downward facing blinds are best when you are “down” and ready to go to sleep during the nighttime hours.
Use your blinds – tilt, twist or turn – to regulate temperature. If you do not have blinds, adjusting shades works, too! On hot days, tilt the blinds upward toward the ceiling to block heat from the sun – this simple action can reduce heat gain by up to 45 percent.
When you close your blinds, Close them backwards so the underside of the blinds are facing you and the nicer side facing outward. Unless someone is really trying to look through or standing on their head they won't be able to see in.
Vertical blinds can face either direction, depending on personal preference and the desired effect. Inward-facing blinds provide maximum privacy and light blockage, making them ideal for bedrooms or spaces requiring enhanced privacy.